Revive your MOWER! Or not…
4:49
14 күн бұрын
2018 Jeep wrangler JK oil change
4:48
I mowed this grass for free.
10:01
Get this instead of Dewalt…
3:52
This Milwaukee driver is a BEAST!
7:02
Craftsman RP IS Dewalt??
3:58
2 ай бұрын
Home Depot is GIVING AWAY TOOLS
3:40
Milwaukee deep cut bandsaw
2:05
3 ай бұрын
Impact driver or Drill??
3:17
3 ай бұрын
Milwaukee M18 Sawzall
3:35
3 ай бұрын
Replacing Lower Ball Joints
7:15
4 ай бұрын
Пікірлер
@samgiamarelos4524
@samgiamarelos4524 51 минут бұрын
That battery is way too big 4 that tool
@learningwithjuan
@learningwithjuan 6 сағат бұрын
Nice Kaleb
@richardwang474
@richardwang474 9 сағат бұрын
I had to put it in slow motion to figure out which one took the cake. 😮
@Kaleb_RoSs
@Kaleb_RoSs 8 сағат бұрын
@@richardwang474 😂
@hoobsug
@hoobsug 12 сағат бұрын
The thing with impact drivers is that they are not wrenches, you don't need super high torque for those, some people miss that
@RMartin631
@RMartin631 14 сағат бұрын
The problem that I have with buying this Hikoki is I already have 17 Ryobi 18 volt One+ tools along with 4 batteries (2 4ah Lithium Ryobi and 2 4.5ah niMH generic)and 2 chargers. 5 of them are the old dark blue tools. I use most of my tools a lot. I am downright abusive to my 1/4" hex impact driver. I cannot kill these tools. My next purchase will be the Ryobi 7-1/4" circular saw. The only Ryobi that I'm not happy with is their cheapest grass trimmer. It just doesn't have enough power and the trimmer head is a piece of junk. I bought it for someone else to use at my house and it just doesn't cut it, pun intended. I'll probably buy a better Ryobi trimmer since the one that I have is the cheapest grass trimmer that Ryobi sells.
@PortDixieandTheJourneyDogs
@PortDixieandTheJourneyDogs 17 сағат бұрын
Yaaaa had a freakin over a wk of that shit here!! Trapped in a 5x8 box the entire time with my girls! Then HALA got about 4 days of st sun!! HALA HALA HALA BECAUSE I BOUGHT LOST MY DAMNED MIND COUPED UP IN SUCH A TINY SPACE THAT LONG!! BUTTTT TODAY IT RETURNED!!! MAJOR POUR DN RT NOW AND MAJOR BAD LIGHTENING! AND IM PARKED UNDER TREES SOOO SCARY SHIT NO FUN!! But I am worn the hell out so it's dn time on my foam bed with some good movies and shows off me apps!!😊😊😊 Hey don't ruin a good Metabo drill!! Send it to me!! B4444 U WET IT!! AFTER JUST KEEP IT! I TAKE EXCELLENT CARE OF MY TOOLS!!!!😊❤
@PortDixieandTheJourneyDogs
@PortDixieandTheJourneyDogs 17 сағат бұрын
TECHNOLOGY SPEAKING THERE SHOULD NOT BE ANY DIFF REALLY!? AS THEY R BOTH THE SAME THING!! THEIR THE SAME THING MADE BY THE SAME COMPANY!!!
@unclefester4626
@unclefester4626 9 сағат бұрын
ARE YOU SURE?!! THEY LOOK JUST A LITTLE DIFFERENT...KINDA LIKE THE GEN 1 IS A LIITLE LOUDER OF A COLOR. THEN AGAIN I CAN'T TELL AS I AM HARD OF READING.....🤪
@shawnhalverson8108
@shawnhalverson8108 2 күн бұрын
To bad the batteries are junk
@hemi08911
@hemi08911 2 күн бұрын
Yall too funny. I bought my daughter that drone yesterday and immediately lost 3 blades. It won't fly at all plus the remote was loose out the right out the pack. I'm returning it soon and grabbing me one of those weird tools 😅.
@MrBostonBilly
@MrBostonBilly 2 күн бұрын
I got two leaky batteries with my turbo drill and they sent me two new ones haven't had a problem with them
@MrBostonBilly
@MrBostonBilly 2 күн бұрын
Finally someone who tells the truth, sorry I'm not a hikoki guy I'm dewalt mostly, but I have been saying the same thing time after time. Power is good, but the feel the longevity the finesse of a tool to get the jobs done is what matters most
@chadhamilton88
@chadhamilton88 2 күн бұрын
I don't want a quick inserts I want one spring f*** the two Springs it lasts longer without breaking and the app Feature have the pulse mode and more learn your tools
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
@@chadhamilton88 the app feature still isn’t all that attractive to me. Even with speeds 1, 2 and 3 I just stay in speed 3 and rely on my finger control. Everyone has there own priorities and how they use their tool lol
@chadhamilton88
@chadhamilton88 2 күн бұрын
You're right but don't try to exchange a good thing you can add another spring yourself it's not hard
@nickp3270
@nickp3270 Күн бұрын
another spring? i didnt know it had another spring i know it has a third hammer and three lights i didnt know they did the two springs like makita
@nickp3270
@nickp3270 2 күн бұрын
i just got the newest bosch impact from south korea its not out here yet thats been my favorite lately that or the makita xdt19 i want the td173 makita impact though too lol
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
@@nickp3270 where did you order the new Bosch?
@nickp3270
@nickp3270 2 күн бұрын
@@Kaleb_RoSs ebay lol first time ordering off ebay but it got here fast and was cheap to buy from south korea it came with the bluetooth chip for the phone app which the us bosch doesnt sell with tools always have to buy seperate speed 1 is 800 rpms which is nice for small stuff ive been really happy with it been using it at work the last few days and its the first bosch impact with a quick insert collet so thats pretty cool its the gdr 18v 220c
@nickp3270
@nickp3270 2 күн бұрын
ive been debating on whether to get the new hikoki or the newest 40v makita too but i just cant decide so i dont buy either lol too many tools already i have to start getting rid of some so my girl doesnt kill me lol
@nickp3270
@nickp3270 2 күн бұрын
@@Kaleb_RoSs i answered this that i got it on ebay but for some reason the reply isnt showing now youtube is weird sometimes though so it may show up again and then ill look like an idiot lol
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
@@nickp3270 been there lol, half my tool collection is gone now :(
@ApacheLife-50
@ApacheLife-50 2 күн бұрын
Love my bolt. Almost bought this but didn’t pull the trigger.
@durantplayz7111
@durantplayz7111 2 күн бұрын
I have the 1st gen and 2nd gen triple hammer bolt. Got the Bolt for free with a 36v kit when I bought a nailer. I prefer them over my Milwaukee gen4 and my companies Dewalt. All good tools tho
@HashV17
@HashV17 2 күн бұрын
Haven't seen many people complain about Hikoki tbh. It is a good brand that offers good products. 💯
@spreaddeezhazelnutz7511
@spreaddeezhazelnutz7511 2 күн бұрын
It seems to be one of those brands that most people can mutually agree that you really can't go wrong with them.
@unclefester4626
@unclefester4626 2 күн бұрын
You think your sweating now just wait until your wife finds out the true price of your tool collection.....😎
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
@@unclefester4626 😅
@Soroosh.Jahangiri
@Soroosh.Jahangiri 2 күн бұрын
Looks very fun to use
@ToolswithSoAlz
@ToolswithSoAlz 2 күн бұрын
It's annoying they don't have a quick insert
@vanman_fr
@vanman_fr 2 күн бұрын
Being forced to use 36v batteries is a massive deal breaker for me i dont want to be forced to use those big batteries thats why i love dewalt with the small power stacks. If it weren't for it being 36v i would really want this tool.
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
It is bothersome having heavier batteries but it is still a lighter package than the flex quick eject lol. Dewalt definitely has the best battery for an impact driver with that 1.7 PS
@nickp3270
@nickp3270 Күн бұрын
you can use the 2.5/5ah battery which is the same size as a 5ah 18v battery and literally works on the 18v tools as a 5 ah battery if anything hikoki/metabohpt did their 36v tools better than most companies dewalt also did a good job with their multivolt tools
@MrBostonBilly
@MrBostonBilly 2 күн бұрын
Are they not the same driver?
@Kaleb_RoSs
@Kaleb_RoSs 2 күн бұрын
@@MrBostonBilly practically identical in performance just updated
@MrBostonBilly
@MrBostonBilly 2 күн бұрын
I like the Hercules line and their becoming pro grade. Wish they would bring the line to Canada. I picked up the new hammer drill when i was down in Buffalo last and absolutely love it, very comparable to my flex and Dewalt. Keep it up Hercules and please bring the line up to the great white north
@DiligentDave1966
@DiligentDave1966 3 күн бұрын
I got the gen 1 with 2 batteries, a charger and a hard case on clearance for $70. It's a nice impact driver, especially for that price.
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@DiligentDave1966 for nearly 3 times that price you can get the gen 3 bare tool!! Lol
@DiligentDave1966
@DiligentDave1966 3 күн бұрын
@@Kaleb_RoSs I'll pass for now, but thanks. 🤣
@joaquinchan9936
@joaquinchan9936 3 күн бұрын
I have started to see the finish nailers for pre order. Not the framing nailers yet.
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@joaquinchan9936 yea I’m waiting on the framing nailers
@joaquinchan9936
@joaquinchan9936 2 күн бұрын
@@Kaleb_RoSs that stapler seems like a good buy. Probably first to release a brushless version. We use it a lot at our jobs to attach black paper an radiant barriers.
@durantplayz7111
@durantplayz7111 3 күн бұрын
Damn I want a rear handle 😢
@JohnJohn-nh2rl
@JohnJohn-nh2rl 3 күн бұрын
What matters how will it work in 5-10yrs from now
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@JohnJohn-nh2rl for some people yea. Personally being a tool addict I get all the new ones that come out each year anyways.
@JohnJohn-nh2rl
@JohnJohn-nh2rl 22 сағат бұрын
@@Kaleb_RoSs I do to but don't have budget lol
@SThom27
@SThom27 3 күн бұрын
There's a difference between the two. That difference is rpm. That modified impact driver will burn out if you're actually pushing it all day. Several videos of the Herc brushless burning out during testing that's pushing it too its limits. The Herc compact impact wrench isn't made to loosen lug nuts, despite HF's advertising saying otherwise.
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@SThom27 Interesting! Maybe I’ll try that out. I will say the compact struggled to removed an 8 mm bolt in another one of my videos..it just stinks.
@HashV17
@HashV17 3 күн бұрын
Where are they made? Also China?
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
Sadly
@haroldjones12
@haroldjones12 3 күн бұрын
@@Kaleb_RoSsno, they are made in japan, germany and malaysia
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@haroldjones12 both of these are made in china, koki holdings does have there tools made is several places including japan Germany and Malaysia though.
@DiligentDave1966
@DiligentDave1966 2 күн бұрын
@HashV17, almost everything that’s available for North America is made in China.
@haroldjones12
@haroldjones12 2 күн бұрын
@@DiligentDave1966 they’re not made in the US though
@HashV17
@HashV17 3 күн бұрын
I don't know why but I'm relieved. 😂😂
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@HashV17 😂😂
@user-pe2kp7vp4x
@user-pe2kp7vp4x 3 күн бұрын
Kalec could you tell me if the Flex 24v battery adapter works on the newer Gen Hikoki/Metabo?
@Kaleb_RoSs
@Kaleb_RoSs 3 күн бұрын
@@user-pe2kp7vp4x I for some reason haven’t tried it yet but I don’t think it would because it’s actually a 36v tool. If it does work it would actually be a power loss with the 24v
@Soroosh.Jahangiri
@Soroosh.Jahangiri 3 күн бұрын
That's very impressive
@Soroosh.Jahangiri
@Soroosh.Jahangiri 4 күн бұрын
Both great
@jesus2402
@jesus2402 5 күн бұрын
I found a deal on Lowes for flex drill with 6.0 ah stacked lithium with a rapid charger for $230. I also put an order in for the flex fan for 120$ since they are giving out a 3.5 ah stacked lithium battery with it, which is a no-brainer for me. Total cost i paid was $360 after taxes since i used the lowes comercialcard which give %5 back, which sounds like a lot, but when you buy the battery and charger separately, there's a huge price difference. If you were to buy everything separately, it would be. $180 for the drill and assuming you buy the 6.0 ah lithium battery it would run for $250. The fan is $120 tool only, but there giving a free 3.5 ah stacked lithium battery with it. The battery by itself costs $180. The total value of what i got, if purchased separately, would have been $568 before taxes.
@jacobkoz1835
@jacobkoz1835 5 күн бұрын
You can do that with a Milwaukee now the problem occurs if you do it multiple multiple times you’re just creating a lot of buildup on the contact points of the electrical system in that drill as well as ruining your
@KansasTools
@KansasTools 6 күн бұрын
All clean ready for another work week 😂
@gnic76
@gnic76 6 күн бұрын
That's one way of getting the dust out of it. 😂👍
@ToolswithSoAlz
@ToolswithSoAlz 6 күн бұрын
It works
@kd9937
@kd9937 6 күн бұрын
I try to stay away from anything from Chinese companies
@Kaleb_RoSs
@Kaleb_RoSs 6 күн бұрын
@@kd9937 sadly that’s pretty much all of them
@kd9937
@kd9937 6 күн бұрын
@@Kaleb_RoSs at least Stanley Black and Decker is still an American company
@Kaleb_RoSs
@Kaleb_RoSs 6 күн бұрын
@@kd9937 I suppose but a lot of it is just global materials, I do plan on getting these new dewalt tools coming out though
@kd9937
@kd9937 6 күн бұрын
@@Kaleb_RoSs global materials is the dumbest excuse to not buy from an American company You think the Chinese company isn't using the cheapest materials they can get also Spend a little more and support American companies but too many people want the cheapest and don't care about supporting their neighbors You won't see me or my guys with Milwaukee or Flex lmao I love America
@unclefester4626
@unclefester4626 6 күн бұрын
Wrong....just plain wrong....😳🤚
@Kaleb_RoSs
@Kaleb_RoSs 6 күн бұрын
@@unclefester4626 lmao why 😂
@unclefester4626
@unclefester4626 6 күн бұрын
@@Kaleb_RoSs that don't need water in there. At least you didn't put it in concrete like another channel did. If you do I WILL NOT WATCH...🙄 Shudder shudder....
@Kaleb_RoSs
@Kaleb_RoSs 6 күн бұрын
@@unclefester4626 lol
@user-vq4bl2fs3o
@user-vq4bl2fs3o 6 күн бұрын
I wanna see witch gun can remove rusty lugs that have been on for some time.taking the same lug on and off with heat it up some,and make it easier.lol
@Kaleb_RoSs
@Kaleb_RoSs 6 күн бұрын
@@user-vq4bl2fs3o yea I’m trying to make a rig or something. I take them out to the junk yard as well
@markbass9639
@markbass9639 6 күн бұрын
I love how after the Hercules won something everyone saying the test is rigged lol. Tools are tools folks, if y’all mad that a drill/impact that’s a third of the price you paid for big red showed up your tools, you’ve got some bigger problems then spending all your cash on some tools. Tool derangement syndrome. Good for Harbor Freight, keep kicking them out love these tests
@HashV17
@HashV17 7 күн бұрын
I have this mental illness where no matter how greatly something is rated waterproof or and IP67/8/9 or whatever, I just can't. 😅 But i get it, it's a tool test and informative video so thanks for doing what most of us are afraid of. 💯
@Kaleb_RoSs
@Kaleb_RoSs 7 күн бұрын
@@HashV17 we’ll see if it still works tomorrow!
@ericnichols9275
@ericnichols9275 6 күн бұрын
Did mine in a pool and ran it for 5 minutes and it did not work right after that but went back LOWE'S and got a new one for free and it was the GEN 2
@chadhamilton88
@chadhamilton88 7 күн бұрын
a high pressure water hose killed mine just don't turn on after you spray it down with the water hose no big deal they gave me a better one got to love the lifetime warranty