how do you remove the head on this. The switch cover came off and you cannot push it back on without removing the head to access the switch cover sliding base.
@DavidOne2646 күн бұрын
I come to see Abatutu 😃
@ASpinnerASpinner7 күн бұрын
The guide for the lawnmower blade is worthless. You still have to freehand it so there's not point it buying the guide, just buy the stone.
@linnie-ei2gl11 күн бұрын
Great video, thank you.. I'm just starting to use a Dremel Lite, I was given so this is very handy, thank you. ☺
@jeansdedon12 күн бұрын
Are these Stanley Hammer older fuse boxes outlawed and if so what year?
@gustavopuggina273213 күн бұрын
Need to publicize some work or ladies of qork.
@Zavtar14 күн бұрын
I think you should label it DreAmel ✨
@drumw4117 күн бұрын
Will this work with keyless chuck using the flex shaft?
@adrianfernandez526219 күн бұрын
Is it good?
@jayemeow233322 күн бұрын
Thank you so much. The instruction booklet focused more on how to grind pet's nails than it did on how to set up and use the actual Dremel.
@ultraali45327 күн бұрын
Excellent!
@jakemiles1427Ай бұрын
Horrible video, doesn't explain anything
@A6LegitАй бұрын
Props for the bearded dragon features
@dangleebals6746Ай бұрын
Good god Dremel is so weak and so poor for what they claim it's capable of, and if you're using it with a grip chuck make sure to buy a replacement grip chuck for every single tool each time you want to use it and still work
@ModelingSteelinHOАй бұрын
I have been using Dremel Multi Tools for decades. Currently on my fifth tool. If you are thinking about buying a Dremel. Buy it. I suggest buying the keyless chuck for super quick bit changes. Other than that. This tool is worth it's weight in Gold. You'll find many more uses than modeling,crafting, woodworking ECT.
@mcallard911Ай бұрын
Look so easy on the video. At 0:20 second, how the heck do you pull this thing. I have one and still can't figure out how it work, lol.
@woodenheart3494Ай бұрын
too fragile.. two of my dremel 3000s have already broken.. you know what the problem is, many have complained about it. Why don't you fix them?
@nickturner4150Ай бұрын
Perky music
@efrawley55Ай бұрын
a waste iof a video - showed bnothing
@shalnerching94832 ай бұрын
haha love this
@AcysLounge2 ай бұрын
As much as I like my Dremel 8260, as much I do not like (I would even say "hate") the poor quality, and I mean really poor quality of some important Dremel accesories. You buy a really good tool, but then you got no chance getting really good collets, or drill chucks. The Dremel labeled collet set I bought was trash, not centered, and when using these collets my 8260 get unbalanced and starts shaking. Also Dremel drill chuck was just also trash with the same problems. And there is only this trash available, .......... I did return all these collets and the chuck. This was just standard really bad chinese made quality, and adds some bad taste to my great 8260. This only shows that earned money stand way more up than good quality. And here this is really bad, as with such collets and chucks you ruin your good 8260 tool, and make is same bad quality as cheap chinese rotation tools for about 30 Euros. If anyone knows where to get really good collets and chucks, please send me a note. If you bought dremel collets and these are working fine, ............ be happy with it. I did not have same luck about this.
@KoolKatBeatz2 ай бұрын
the touch display corners on mines is messed up....dam
@silverbowftw52252 ай бұрын
YESS
@P7_Drowsy2 ай бұрын
It was so difficult to find this ad. Just to show someone the beardies in it. 😂 Finally found it. Gotta save it somewhere.
@DremelUSАй бұрын
We hope you enjoyed it!
@braindeadgoldfishАй бұрын
Same!!
@A6LegitАй бұрын
Just found the short. Had to search "multiest tool in the world". Got nothing for Dremel commercial
@AshleighPajero2 ай бұрын
What is the radius of curvature
@robinwolfe46212 ай бұрын
Cute pup ❤
@lawrencediggs79572 ай бұрын
Thanks. Can you explaing why dreml tools eject the removed material towards the user rather than away? If that is not how you intended, cam you give directions to the proper use of the tool to remedy this issue? Would it be possible to make the tool directional? If not, why not?
@mattfm1012 ай бұрын
This would have been better to do a before and after and perhaps shown the difference between grits
@ms.maenner61822 ай бұрын
My card reader does not work. Can I print directly from DigiLab?
@patterdalezipsuzilil3 ай бұрын
Leavd chain on bar 😂😂😂
@Pedro-9443 ай бұрын
what is nosecap and collet what is the point of you making a video? it is not clear. I might as well just read the instructions and investigate. you are making things hard with this video and it serves no purpose. That's why nobody comments
@rochelem38723 ай бұрын
Will this clean off oxidization or liver of sulphur? Or are the metal bristles too soft?
@IllisiaAdams3 ай бұрын
"UL certified"?
@IllisiaAdams3 ай бұрын
Why are there only women in this advert?
@ngocnguyen-hn3kp3 ай бұрын
Trash
@IllisiaAdams3 ай бұрын
May I ask, please, why you think so? Can you recommend a better alternative? Thank you very much in-advance.
@argusroot3 ай бұрын
cool ! (first)
@angelramos-es7eu3 ай бұрын
Some blue things with paint
@jesterman13023 ай бұрын
This is awesome. You best believe I'll be asking questions!
@TeeOCee3 ай бұрын
Sorry, but nobody that is going to buy a Dremel is going to relate to this video. Its like you are just marketing to hippies!
@dorg5263 ай бұрын
is this a only wireless printer or can I connect to an ethernet network?
@kaylnbryant22833 ай бұрын
Trash, I couldn’t even polish a lighter with this model
@tomerwallach21903 ай бұрын
I saw this tool on their catalog and went on KZfaq to be sold on why I should give this tool a try and spend the 100$(this is what it costs where I live ) and honestly it looks like a regular lighter … can someone who has it spread some light on the matter ?
@yvespetit3 ай бұрын
Tomer, I have been using it for a couple years to solder galvanized steel (0.024'' thickness). Il works fine when the flame is at its maximum but sometimes it looses power and refueling it gives it another go althoug I'm sure the reservoir is not near empty.
@ultravioletcanary3 ай бұрын
Can I cut river rocks with the EZ545HP??
@iandolmseth3 ай бұрын
a dremel drill, like this but being able to drill screws
@nabhaitevattan4 ай бұрын
@Dremel it’s an amazing tool. How does it convert into inches.
@povertyvoyager3 ай бұрын
Mine is in inches, I want cm
@biggusdickus59864 ай бұрын
That things enourmas, my Bosch cordless hammer drill isnt as bulky as that, had been going to order it but glad l didnt now, l thought it would be a quarter that size lol, might as well stick a sanding wheel on my Bosch than that thing ordered Depstech instead, half the price too. That things like 2 baguettes stuck together 😂
@edwinshmedwin3 ай бұрын
You get the flex shaft with it Is what most people do. For a cordless rotary tool, this is pretty much the best one out there, but if you say so pal.
@edwinshmedwin3 ай бұрын
Different rotaries are for different things. I bet your tint Bosch diesnt have enough torque to do what this can, just sayin. Its big for a reason, not just because they wanted to make it be unnecessarily bulky.
@brunofukuza56734 ай бұрын
Comprei usei e a broca moeu no primeiro rejunte kkkkk
@PinoyBowlerGS924 ай бұрын
I know my comment is late but is there like an extension rod for the Dremel ? I want to sand deeper inside the Thumb hole of my Bowling Ball