Nice….I have a 2014 Rt Limited. I saw your other video and I want to know what kind of sound system do you have? Also I’d like to know the underglow lights, and if it’s somewhere else that I can order cheaper than sling mods?
@UPSMANMT5 ай бұрын
Hi boots, trying to find out who did the custom seat on your Spyder, I am about the same size as you, thanks for any info.
@ridingwithboots7305Ай бұрын
Hey there, sorry I missed this question! I took the seat on my Spyder to a local upholstery shop to have the “butt stop” moved back. It can safely be moved back a couple of inches. If you move it too far back you will run the risk of your bottom being uneven due to the slope of the seat pan. Another option, which is pretty expensive, Russel Day Long will adjust your seat to your dimensions by using pictures you send them. Hope this helps!
@UPSMANMT5 ай бұрын
Hi boots, trying to find out who did the custom seat on your Spyder, I am about the same size as you, thanks for any info.
@vickaminski Жыл бұрын
Hook up a battery direct wire not to pull too many amps on that stock wiring and risk blowing the circuit and it will be louder with more juice to the compressor. I'll make a vid showing the difference when i hook mine up.
@indianapublicland7429 Жыл бұрын
jUNK hORN!
@tylerjohnson3195 Жыл бұрын
Hold up. You buy this thing from the company that sells them and they tell you to go on a scavenger hunt for different pieces and parts to install it?
@wandarolland Жыл бұрын
Where did you get your led lights from ❤I'm new to the spyder life
@ridingwithboots7305 Жыл бұрын
Which ones specifically? I eith got them from Spyder Pops or Slingmods.
@wandarolland Жыл бұрын
@@ridingwithboots7305 all of them I'm from SC also and I want my bike with all the lights on it plus who installed your
@wandarolland Жыл бұрын
Are you on Facebook so we can messenger
@ridingwithboots7305 Жыл бұрын
Yes, Freddie Pough
@wandarolland Жыл бұрын
@@ridingwithboots7305 looking for you now
@kevinternes3188 Жыл бұрын
Just installed with my nephew. USE 12G WIRE AND RELAY!!! NEED THOSE WIRES FOR THE CURRENT PULL!!!! REMOVE TANK ALSO. Open wire channel. We pull original horn wire back up, down the wire channel, just into battery area to plug directly into relay. USED 12G Wire, ran tight to frame into wire channel, into battery area, plugged into relay. Connect to battery. AS INSTRUCTED. No hot wire issues now. Big wire= more power. Long honk, multi honks.
@Sickcents666 Жыл бұрын
You did plug and play…. Why do you think the instructions want a relay??
@Sickcents666 Жыл бұрын
I’ve watched other vids and don’t understand why people don’t do what you did? I’m no electrician so I don’t known pros and cons of using relay/not using relay….
@tonysally2470 Жыл бұрын
Gorgeous bike - thanks for the video
@bigross03182 жыл бұрын
The ad makes them sound so much louder like an actual air horn, was it just me or does it not sound as loud in these tests?
@coolcj15 Жыл бұрын
The ads use audio clips from other horns. It's a scam
@londonjade192 жыл бұрын
I've been following you and came across your trike video. I have a question regarding.. if you don't mind. and do you have an email?
@tonytone60712 жыл бұрын
Doesn't sound like the ad
@partyboy03192 жыл бұрын
Do you know if this might be louder than the probeast horn?
@waking_up_lions Жыл бұрын
YES! I sent the PornBeast back the next day because it sounded like a goat being violated! :)
@donaldrobertson25482 жыл бұрын
Who did your seat🔥🔥🔥🔥🔥🔥🔥🔥
@ridingwithboots73052 жыл бұрын
C&C Custom seats in California
@mikdagoproductions2 жыл бұрын
I tried this way directly to the horn wires. Only get one honk. Then have to turn ignition off and back on to activate again. You need to use the relay and wires provided in the 2.0
@ridingwithboots73052 жыл бұрын
This video isn't for the 2.0. Also, as stated and shown in the video; using the OEM wiring worked fine for my 2013!
@mikdagoproductions2 жыл бұрын
@@ridingwithboots7305 I tried wiring directly from existing horn wires and just get one honk. Thank you though
@ridingwithboots73052 жыл бұрын
Sorry it didn't work for you!
@mikaylagunden90812 жыл бұрын
Using the wrong guage stock wire without using an electrical relay might work, but you are risking problems. You're only getting 30% of what you should get sound wise. Great horn though.
@ridingwithboots73052 жыл бұрын
🤷🏾
@mikesloper71122 жыл бұрын
Just wanted to say 'Hi' & pass comment on your spyder (in thread comments appear off) so here I am. Very sweet indeed sir, classy & manufacturer plus. Take care Big Man, wishing you health & happiness !!
@TheRock7162 жыл бұрын
I have a few questions about your speaker system you put on your spider. What rear speakers and what tweeters, and amp did you go with. I appreciate your videos you’ve given me a lot of good ideas. I’m like you. I gotta have my music !!
@williammarks46382 жыл бұрын
Would like to know who did your rims
@williammarks46382 жыл бұрын
Hello
@williammarks46382 жыл бұрын
How you doing my name is William would like know who did your rims please
@ridingwithboots73052 жыл бұрын
I'm good thanks.... The wheels were made by SMT Machining. They came all black and I had a local custom paint shop color match them to the bike.
@ironmike10932 жыл бұрын
Won't work with my 17 ultra
@unclesaamisarmory2 жыл бұрын
If this works with just plug and play, what is the reason for the relay then?
@ridingwithboots73052 жыл бұрын
The HD stock horn has a relay. So my educated guess would be that they send a relay for vehicles that aren't equiped with one. However, if you want a definitive answer ask MotoHorn.
@raivosagur61522 жыл бұрын
Guys if you hook it up like this, you might damage your ride. This horn should be wired with a relay and 12 AWG wiring, MotoHorn also now provides this kit with their 2.0 horn. It is literally 10x louder then too.
@its_key2 жыл бұрын
Please don’t hook up the wires like this. The current horn relay will NOT run the Motohorn to its full capability. The dedicated relay is easy to install and very necessary. Otherwise you might as well just use your stock horn. Also, the tip about the using the existing wires is exactly what the instructions on line say to do. Just follow the instructions dude. Thank you for sharing. Beautiful bike!
@ridingwithboots73052 жыл бұрын
Hmmmm.......maybe for your year bike, but as I state in the video; 09-13 touring works just fine. Have it wired the exact same way on my 2010 Tri Glide as well. 4-5x louder than a stock horn.
@raivosagur61522 жыл бұрын
@@ridingwithboots7305 Would be 10x louder if you didn't use the stock wires though. They now provide a relay 12 AWG wiring kit with the 2.0 version, there is a reason for it.
@2moomoo112 жыл бұрын
On the fence about buying one, would you recommend ??
@ridingwithboots73052 жыл бұрын
For the cost and what it does, yes. However, at the next rally I attend I will probably be going with the Custom Dynamics Pro Beast.
@2moomoo112 жыл бұрын
@@ridingwithboots7305 louder unit?
@ridingwithboots73052 жыл бұрын
@@2moomoo11 cleaner, plug and play install. Simply replace stock horn and run power wire to the battery
@2moomoo112 жыл бұрын
@@ridingwithboots7305 I see, harley plug and play. I have a different bike so both will look out of place a little. Was curious if its actually loud considering the compressor size.
@ridingwithboots73052 жыл бұрын
It's very loud!
@raulgonzalez47102 жыл бұрын
Beautiful bike, congrats!
@jimnastics39152 жыл бұрын
Why is there a magnetic screw holder on the tank?
@drblwitt2 жыл бұрын
Where did you get the the top foot resting peddles? I have the exact same bike as you. I feel that my legs need to expand more while driving.. Ty.
@ridingwithboots73052 жыл бұрын
Sling Mods.
@fu23ji2 жыл бұрын
Can you let me know where you got the seat customized...I'm a big guy myself and would like to sit back a little further....Thanks
@donaldshaw94802 жыл бұрын
Thanks. I hooked motohorn as you did it honks once and I have to wait to honk it again it will not honk after the first honk. Any ideals.
@raivosagur61522 жыл бұрын
Go to their website and follow their manual, your stock wires only allow it 5A of current, this horn uses like 20A. Much louder if wired correctly.
@kennethmeyer26232 жыл бұрын
The only problem I see was hooking it to the original horn wires is there either 16 or 18 gauge and they will get hot Could be an electrical problem it calls for 12 gauge But I love all the rest of what you've done let me know how that original setup works
@shelbyfritts7402 жыл бұрын
You didn’t need an extension
@williamlewis83542 жыл бұрын
Thank you for the video. I just received my Motohorn in the Mail today and I'm going to try your way on my 2020-Harley-Davidson-TRI Glide Ultra.
@jessicadiesel3193 Жыл бұрын
Hey please let me know how it’s sound on your trike I brought my on 2021 and I’m waiting to someone tested this moto horn to see how it’s sound thanks
@reginaldbutler93792 жыл бұрын
Boots, How’s it going. I gotta question about your RT Limited. I have a 2019 with some of the aftermarket additions also, but I can’t get my music right for nothing, where did you find a good shop here in South Carolina, I live in Columbia SC, would love to add better sound to the rear of my bike, when you comment or respond I will show you my bike and some of the upgrades I did last August, again what custom shop you found here in South Carolina that did your sound, I would love to know.
@ridingwithboots73052 жыл бұрын
Hey man....I have since sold that bike but happy to help! Would love to link up and ride some too! As for my music, all speakers were DS18 and the amp was a JL 6 channel. The work was done by Elite Audio in Spartanburg. Would be happy to make an intro. Really good people that do GREAT work.
@reginaldbutler93792 жыл бұрын
@@ridingwithboots7305 zzz thanks I appreciate the response back, well as for me I live in North East Columbia, so anytime on the weekend sounds good to me to link up
@TrainerDude512 жыл бұрын
Sweet looking bike! 👍🏾
@JohnBraman4132 жыл бұрын
never used a drone. was it hard to figure out at first?
@ridingwithboots73052 жыл бұрын
Takes some getting used to. Watched a lot of KZfaq videos before flying and took it slow in the beginning. Very fun!
@ariesmann2 жыл бұрын
Putting the compressor in the Horn cover was Genius ! thanks !
@freddieferdinand95912 жыл бұрын
I would like to know what kind of sound system you have, and who installed it
@daveyanke83072 жыл бұрын
Does it hit the mid-frame heat reflector at the back of the horn? I am installing tonight and thinking of either tilting it slightly before drilling the mounting hole or removing the mid-frame deflector on that side which DK Customs suggests anyway to increase airflow (one on the left side remains) fr heat reduction.
@thegrumpyolgringo2 жыл бұрын
Great video as well as great soundtrack. Love what you did with the Drone footage. Cover bridges baffle me, with that very old technology and tools, but still standing strong after these many years. Gorgeous day for SpYdering. Thanks for the rYde along. StaY Alert. rYde Safe in a fun way. Thanks for sharing. Keep on SpYdering. 😎🇺🇸.
@bernardlock27282 жыл бұрын
I am posting here because comments are turned off on your RT Modification post. Can you modify the post to add and link all of your accessories especially the radio system. I have a 2015 RTS. Thanks.
@mrslaharris71282 жыл бұрын
Awesome just amazing ty for this I need some ideas 💡 from ur last video on light for my spyder. As well as im trying to find a place to do adjustments in handle bar do know any major place in ur area im in Memphis
@gregkamer37542 жыл бұрын
Nice job, very well done.
@ridingwithboots73052 жыл бұрын
Thanks so much!
@baslerfam152 жыл бұрын
I laughed when the neighbor honked back after you tested it
@ridingwithboots73052 жыл бұрын
Yeah, that was hilarious😂
@derrick.l18702 жыл бұрын
Haha yeah I heard that top. They were like, What's up😁
@derrick.l18702 жыл бұрын
Preciate cha on this video, it helped me a lil
@BaldDogM712 жыл бұрын
Thanks for the video!! I iust got one for my Roadstar today!! I didn't have any idea on how to hook it up until watching your video. I got ran over by a drunk driver 4 years ago I definitely wanted to get one
@ridingwithboots73052 жыл бұрын
Happy to help, brother! So glad to know it helped. Glad you're ok and stay safe out there.
@BaldDogM712 жыл бұрын
@@ridingwithboots7305 thanks!! Stay safe out there too brother!!
@rickybrown17152 жыл бұрын
I do think this Moto Horn would be louder with the total install with relays/fuses
@ridingwithboots73052 жыл бұрын
So you think a relay or a fuse is going to push more air from the compressor? Share your results and hopefully we all can benefit from them. Thanks
@rickybrown17152 жыл бұрын
@@ridingwithboots7305 I got one in today, I'll keep you informed.
@ridingwithboots73052 жыл бұрын
@@rickybrown1715 awesome! Let us know!
@telesleeper2 жыл бұрын
These horns seem louder in the ads…
@blkbowhntr00872 жыл бұрын
Just subscribed to your channel, Spyder rider also 2011RTS. I love it just wish I could get better fuel range on long trips. Looks like an awesome ride to upstate S.C.
@ridingwithboots73052 жыл бұрын
Thanks my friend! Yes.....I have been doing a lot of research trying to figure out better fuel range. It's really disappointing. Coming off an HD Road glide and could get over 200 miles to a tank.
@blkbowhntr00872 жыл бұрын
Yes indeed, I’ll get a 1330 Spyder next way better fuel range. But for right now I’m blessed, not many people are able to afford or ride like we do. Keep the videos coming.
@mobetterg2 жыл бұрын
Simply amazing greeting from Harrisburg Pennsylvania 🇺🇸 was looking forward to seeing your drone video of that covered Bridge 🌉 ,Most of the time people don’t get to see the beauty from above as we do using our drones 🚁 , Here’s a video of 1 Can Am Spyder groups I’m a member of riding through cover Lancaster Amish country Covered bridges 🌉 Hope you enjoy it. kzfaq.info/get/bejne/l8qppqeAspq0n4k.html