The audio sounds different on either side of my earphone.
@joshk6922Күн бұрын
Amazing! Thanks so much! I used an ear syringe from my local pharmacy!
@unknownid9982 күн бұрын
hello i’m trying to turn my girlfriend’s espresso machine with a smart plug; she has the Lelit Bianca V3. I tried turning the machine’s button with a switch bot but it wasn’t strong enough to push the button. We tried with a smart plug but it doesn’t turn on, any suggestions?
@Eiji_Kisaragi2 күн бұрын
wow am the first.
@luisp.20283 күн бұрын
Does it show the real pressure? Because I don't see any gauge. As I can see you program a "desire" pressure, but how do we know that it is really reached?
@ImagineREAZ6 күн бұрын
for commercial ( event vehicle) use how many espressos can you make in one hour, thinking of one of these for aesthetic and one Elektra Sixties 2 group . what about the Mini Belle in background? Can that be used commercially ?
@ItsMalkas9 күн бұрын
I was struggling to diagnose the issue of my coffee machine tripping the circuit. I followed your steps and it managed to figure out that it is the heating element that needs replacement. Thank you for making this video!
@Ad-kw6yk14 күн бұрын
Is it normal for the lelit Bianca pressure valve/OPV to continually drip while on and after turned off for 15/20mins
@1st-lineequipment12 күн бұрын
Not normal when the machine is off. There are three valves inside that can cause dripping. Search our KZfaq channel on how to diagnose. If plumbed, it may be a high pressure issue in your water line.
@AM-zu1xi11 күн бұрын
@@1st-lineequipment Thanks for your reply it was very helpful. I talked to my seller, and they told me dripping when its on is fine (which I assume you agree with) however they told me after I switch it off the dripping for a bit is fine too? I honestly take your word over theres though. Any idea why they might be saying the opposite? They are somewhat well regarded but i'm in New Zealand which is a smaller place
@1st-lineequipment8 күн бұрын
@@AM-zu1xi The drippingfrom the front spout should stop after warm up is completed. The only time after warm up is when making espresso or shortly thereafter the OPV opens up. Once the unit is shut down, it should not drip at all until the bleeder valve opens and the spout give off a few drops. If plumbed in, then a high pressure in the water line may be causing the issue.
@AM-zu1xi7 күн бұрын
@@1st-lineequipment Thank you for your reply. It's not plumbed in. I talked to the guys I bought it from and they told me over the phone its normal? And that it should just not be hissing continuously after warm up..
@urikachannel19 күн бұрын
How much?
@1st-lineequipment18 күн бұрын
Pricing varies around the world and prices can change through tout the year. Hence, we usually do not mention prices.
@TheTinotoon19 күн бұрын
thia is a great video thank you - I have a brand new Rancilio Silvia Pro X and it has the h20 message - I've followed all the instructions but still it wont disappear - anything else I can try? Thanks
@1st-lineequipment18 күн бұрын
Yes, please make sure to make sure the little canister is fulled pressed into the x in the reservoir. Otherwise, if it is brand new, please contact your reseller who you purchased from as there can be numerous other causes beyond the scope of our free support.
@TheUmberto19 күн бұрын
Looks great!!!
@sco0tpa19 күн бұрын
Thank you. Mine arrived today. This is very helpful.
@mehrankhodai688819 күн бұрын
Excellent.
@RobertFHarrison20 күн бұрын
More content after yesterday's really, really long live? Okay, I'm up for more!! 🙂
@paulmarks718520 күн бұрын
Would you do a review of the Rocket Porta Via?
@1st-lineequipment20 күн бұрын
We are very sorry that we are not carrying this model at the moment.
@paulmarks718520 күн бұрын
What I like about your videos is the detailed look at the technical workings of the machines.
@PeachCake-zs6gn20 күн бұрын
The bottom of my silvia frame fell off today due to rust. So now I am trying to figure out how to do the frame replacement. Thankfully I already had one purchased and I'm glad to see it's actually stainless now!
@atekee21 күн бұрын
I live in NY, is Poland Spring good water for Lelit Bianca?
@1st-lineequipment21 күн бұрын
The problem with PS water is that you are not always sure which exact spring the water comes from. So, one bottle may be from PA and another may be from another spring. Hence, PS is not the best solution. We wish we had the perfect water, but we have not found it yet.
@atekee20 күн бұрын
@@1st-lineequipment thank you for the reply. Is there any specific version of poland spring I should go for? Bottled in Maine for example?
@1st-lineequipment20 күн бұрын
@@atekee Sorry, we are unsure how to identify different bottles from PS's different springs. This will be something you need to ask them. The key will be to also test the water as water quality can change over time.
@atekee20 күн бұрын
@@1st-lineequipment will do thank you!
@franciscodiazley644421 күн бұрын
I didn’t understand the function of the tamper! Great Video BTW
@1st-lineequipment21 күн бұрын
Thanks!
@denden510424 күн бұрын
I have the Nuova Simonelli musica lux and now want to replace it with a dual boiler. My first choice is the Torre Peppina then Orchestrale nota or Rocket R cinquantotto. I like the ideas of your Machine. I also want to use it in the near future for a start up cafe business. Is your machine a great pick amng the brand I have mentioned?Thanks.
@1st-lineequipment22 күн бұрын
Thank you. If you are in the USA, please call us for more advice. There is a conversation to be discussed and beyond the allowance of what KZfaq allows. If outside the USA, we are unable to make recommendations since service and support may be different than that in the USA. Thanks for watching!
@nazar716126 күн бұрын
Thank you so much for this vid. My Question is ‘’ Could this (sensor corrosion ) be the reason my Lelit Bianca PID went off (no display)’’
@1st-lineequipment26 күн бұрын
It is one of several possibilities. There are other possibilities as burnt wires, bad brain, bad LLC, safety thermostats tripping, etc.
@nazar716123 күн бұрын
@@1st-lineequipment I am really thankful for your valuable info! You wouldn’t imagine how poor Lelit support reply was!! Please keep enriching us with your informative vids 💐🙏
@pawelb473426 күн бұрын
Lelit Victoria automatically refills the boiler, but could not justify almost x2 price over Anna 2…….
@nevermindthees28 күн бұрын
But please tell me:, what the h.. is a "jaclure" My command of English seems to be at a loss, here.
@1st-lineequipment27 күн бұрын
the gicleur is found on many groupheads of many commercial espresso machines
@nevermindthees27 күн бұрын
@@1st-lineequipment Ah, thank you. It's French. I needn't worry about my English, but I have to about my French.
@nevermindthees28 күн бұрын
Hey, I like your presentation! Because it is instructive, full of practical tips and as a bonus funny. Thanks
@BlancoHarpistАй бұрын
Should I grind on a fine grind setting? Or a coarse grind?
@1st-lineequipment27 күн бұрын
Usually, it does not matter. However, you can start coarse and rotate the adjustment setting finer WHILE THE GRINDER IS POWERED AND MOTOR RUNNING.
@FlorenceLeclercqАй бұрын
Gulgong Nsw Australia.
@timhanley4396Ай бұрын
Do you still recommend the silvia
@1st-lineequipmentАй бұрын
Yes we do still recommend the Silvia!
@timhanley4396Ай бұрын
@@1st-lineequipment will the lack of a PID be an issue in the long run
@1st-lineequipmentАй бұрын
@@timhanley4396 PID lessens grouphead flushings, but costs more to repair when failure occurs in the mid to long run.
@ReefBrosCanadaАй бұрын
Love it Jim!
@ReefBrosCanadaАй бұрын
That looks interesting. I’m loving this series Jim! Do more!
@urikachannelАй бұрын
Almost like Frappé 😅
@iqbalyusaf1644Ай бұрын
Thanks for the video instructions. Was able to replace the gasket and screen without any issues. You are the man, Java Jim!
@1st-lineequipmentАй бұрын
Happy to help!
@emirvezirАй бұрын
Hi Jim, thank you for the information. I have one question, How long does it take for the Lelit Elizabeth to be ready for use after you turn it on? If you would answer me it would be very helpful. Thanks!
@henrykg8 күн бұрын
For me it's 20 minutes. No less. There are only a few machines that are ready faster (e.g. Sage/Breville Dual Boiler - 10 minutes)...
@saucesecreteАй бұрын
nothing like a good espresso in the morning cheers and blessings
@coralbeecham5173Ай бұрын
I appreciated this walk through video, thanks! As someone who is completely new to the prosumer level espresso machines, I just needed something to show me basic settings and how to program it so I can drink decent coffee while I learn how to properly profile and dial in the machine. I was struggling big time with just using the paddle right off the bat.
@ytlongbeachАй бұрын
It's Java Friggin' Jim !
@ReefBrosCanadaАй бұрын
need a follow up video of java jim on the taste profile😄
@sylvainberthelot8877Ай бұрын
No, the duo steel PID
@IkechukwuNwachukwu-on8wmАй бұрын
The machine trips off the dispensary light display and will not dispense
@abdullahalagil9893Ай бұрын
Hi Can I have the machine suck the water from water bottle next to it ?
@italolacognata3786Ай бұрын
Hi. Had my Classika for about 2 months and the steaming was giving me issues. I removed the steam tip and found small pieces of plastic in the tip. I am amusing the gasket blew. So i don't believe it is from wear because the machine is fairly new but either tightening the knob too much or which I am sure I didn't do turn off the machine in steam mode with it it still pressurized. Going to call for replacement gasket of course. What's your opinion.
@1st-lineequipmentАй бұрын
I would say the best place to ask this in the Q&A of this item at 1st-line.com or you can search for the part on 1st-line.com as well.
@Ajchester544Ай бұрын
Thank you!!!! The magnet was the problem. Had no idea what that thing was
@roscored1000Ай бұрын
thanks for the video i just bought a spare portafilter and it is 0.5mm thicker so a bit tight but of course you comment about gaskets made sense when it needs replacing thanks.
@1st-lineequipmentАй бұрын
Happy to help!
@mariccАй бұрын
What’s the burr cleaning product you spoke about?
@dvcm27Ай бұрын
Can the water and steam boiler be opened to clean out because water just drips out it doesnt flow. The steam wand wirks fine.
@T3rm3nator2 ай бұрын
Thanks, forgot it on 7c
@topjets56162 ай бұрын
Great Video :)
@valfanculo46142 ай бұрын
if using the pouch - can you use tap water and this pouch or brita water and pouch etc, ? thanks
@valfanculo46142 ай бұрын
this is more confusing than not - so what water is good to use ? i been using brita filtered water along with the water softener pouch that you sell - is that OK ? if not - what can i use instead or do that will help keep the machine limescale free and not affect the PID ? thanks Can you make a video on WHICH Water is best to use ?
@try6767youtubacc2 ай бұрын
Hot DAMN! This helped me solve the issue with my Ascaso Dream in no time, after months of it not working! Thank you so much for this video!