Пікірлер
@derikandreoli5177
@derikandreoli5177 Күн бұрын
This is awesome! Thank you!
@choompa
@choompa 2 күн бұрын
What's your sprocket gearing now?
@SeanFillner
@SeanFillner 2 күн бұрын
I put 14 tooth front sprockets on all 5 of my 373cc ktm powered bikes.
@choompa
@choompa 2 күн бұрын
@@SeanFillner How about the rear?
@SeanFillner
@SeanFillner 2 күн бұрын
If it's not in the videos I never changed it. It's a pointless mod on these budget bikes. A 14t is plenty.
@markbevans8564
@markbevans8564 3 күн бұрын
Grip puppies rock, I had a set on my recently departed R1200rt, after 25k miles they were still perfectly round. Excellent feeling grips😊
@markbevans8564
@markbevans8564 3 күн бұрын
Love the color combo 😊 Ordering a white set today, they look great and the best protection we can buy.
@markbevans8564
@markbevans8564 4 күн бұрын
Look forward to your review on that windscreen. If you’re still getting turbulence around the sides try the Doubletake mirrors as they took all the turbulence away from my tall screen. Thanks for doing your site, it’s a big help for many of us, excellent information
@SeanFillner
@SeanFillner 3 күн бұрын
My goal is not to eliminate 100% of the wind touching me. I did this to lower the windchill factor during the colder mornings and to reduce fatigue on longer touring rides. It is serving it's purpose well.
@mamunchowdhury7966
@mamunchowdhury7966 4 күн бұрын
BS THIS DOES NOT WORK. IT FRIES YOUR BRAKE LIGHT AND YOU HAVE TO BUT A NEW LIGHT. MY LIGHT FOR MY 2024 TIGER 900 AND IT COST $230 TO REPLACE. THERE IS NOT!!! A GYROSCOPE AS PER THE AD. ALL IT HAS IS A CHEAP CHINESE CIRCUIT BOARD OF SOME KIND AND A TILT SWITCH (NOT A GYROSCOPE AS ADVERTISED) CUSTOMER SERVICE VIA CHINA DONT EXIST!!! SO!! DON'T BUY THIS PIECE OF CRAP AND DEFO DO NOT BELIEVE THE BULLSHIT VIDEOS PROMOTING THIS CRAP. THESE ARE PAID PEOPLE BY ST2 IN ORDER TO CON YOU INTO BUYING THIS JUNK. YOU BUY.....YOU LOOSE.
@SeanFillner
@SeanFillner 4 күн бұрын
My svartpilen sold with this unit and it still works to this day. I am not paid/sponsored by anyone on my channel. With that being said I now use a brake free module on my helmet which does the same thing only better. My significant other still has an ST2 module on her ducati and it still works just fine.
@baldwin276
@baldwin276 6 күн бұрын
Thanks for the video. Installing mine tomorrow (assuming they arrive). @MX1West had a 2024 790 kit available on their website. Cheers!
@SeanFillner
@SeanFillner 6 күн бұрын
This is a standard barkbusters kit. Links are always in the description. They are in stock all over ebay and amazon. Thanks for tuning in.
@bicimoto5
@bicimoto5 6 күн бұрын
Any issues with engine heat? I just got one and my legs are getting baked after 1 hr of riding. For the rest, the bike is great. Txs for sharing your experience.
@SeanFillner
@SeanFillner 6 күн бұрын
Never had any "issues" with engine heat on any motorcycle I have owned. Are you wearing proper riding gear? Even in 100+ degrees I have never noticed it.
@bicimoto5
@bicimoto5 6 күн бұрын
@@SeanFillner Txs for the response. I am wearing proper riding gear. This is very noticeable so when I go for my 610 miles service I will check with dealer. It appears to be random. Some people having issues and others no issues. I have owened several bikes and never experienced this level of heat. My last bike a 2017 BMW 1200 GSA had no issues but these are probably the best in terms of engine heat. The 790 is great in terms of riding, on and off road, power, equipment, etc. but the heat has been a big issue for me. I have already tried a few things but nothing working so far... 😞
@SeanFillner
@SeanFillner 6 күн бұрын
Hopefully they help you with whatever the issue is.
@bicimoto5
@bicimoto5 6 күн бұрын
@@SeanFillner I will let you know what end of the story is...
@ev_p
@ev_p 7 күн бұрын
I'm eyeing this 2018 model from my 2015 Forester. I'm curious. Online I'm seeing 22 - 27mpg driving but you said up to 33/34 on the hwy. Are the Subaru mpg specs that far off or do you have mods to help you get this better mpg? I appreciate the help.
@SeanFillner
@SeanFillner 7 күн бұрын
Yes to both.
@eduardocatalansoto4525
@eduardocatalansoto4525 8 күн бұрын
Can i use this on Vitpilen 701-2019?
@SeanFillner
@SeanFillner 7 күн бұрын
Nope. Plug is not euro 5
@Master-Blaster-4x4
@Master-Blaster-4x4 9 күн бұрын
i love the new screen on 24 model
@VongLao-w2g
@VongLao-w2g 10 күн бұрын
Does the TS608 works for key programming too?
@SeanFillner
@SeanFillner 9 күн бұрын
Yes. I programmed several key fobs with mine.
@69SKYSAM
@69SKYSAM 13 күн бұрын
Wings MG ltd company is from Slovenia (EU) and not from Russia. From city of Ptuj - Poetovio from back in the Roman Empire 😊
@SeanFillner
@SeanFillner 12 күн бұрын
Fantastic!! My package label said it was from Russia.
@Intergalactic_monkey
@Intergalactic_monkey 13 күн бұрын
AXP is junk
@SeanFillner
@SeanFillner 13 күн бұрын
You might be right and I might swap it out in the future but for now this is what I got.
@Intergalactic_monkey
@Intergalactic_monkey 12 күн бұрын
@@SeanFillner me too. I just got back from thrashing it on a Colorado trip. I’m actually putting the factory one back on this weekend. Not happy with the AXP at all. There were a few times I avoided routes because the axp just doesn’t seem like it’s going to withstand more than a few big hits. And the side protection near the fuel pumps are …. Well ….not even covering them.
@baldwin276
@baldwin276 13 күн бұрын
Eager to find a good skid plate for my 24 790. I’m a big Camel ADV fan and think that may be the best option (based on my limited research).
@markbevans8564
@markbevans8564 16 күн бұрын
Looking at this three times now, and just started looking to buy one, but all I’m seeing is the plug-in type. Could you pass along the part number? As this looks excellent on your bike and your step by step couldn’t be any easier, well done.
@SeanFillner
@SeanFillner 15 күн бұрын
Links are ALWAYS in the description. :)
@markbevans8564
@markbevans8564 15 күн бұрын
@@SeanFillner Thanks so much, all I had to do was to pull my head out of my ass and read. Again very well done 👍
@SeanFillner
@SeanFillner 15 күн бұрын
No worries at all.
@markbevans8564
@markbevans8564 2 күн бұрын
Works great, so simple to do 👍
@markbevans8564
@markbevans8564 16 күн бұрын
Great mod, love it, gotta do the same to my Norden 👍
@macneil6999
@macneil6999 16 күн бұрын
Would you do a review of the garmin?
@SeanFillner
@SeanFillner 15 күн бұрын
I love all of my garmin products. No complaints here.
@alexgutierrez9140
@alexgutierrez9140 16 күн бұрын
With Subaru Forester hood deflector would it be safe for Auto Car Wash ?
@SeanFillner
@SeanFillner 16 күн бұрын
You mean one of those public "car scratching" facilities?
@droflivelife
@droflivelife 18 күн бұрын
I'm sorry if you always get asked, did they fix the known problems on the old one? Cam, brake disk, leaks, cold start etc? It's 10kg heavier then the old, how's it feel?
@SeanFillner
@SeanFillner 18 күн бұрын
That was the point of rereleasing it. It was built by cf moto this time around. I love the bike. You can see the fixes they made by googling the collaboration between KTM and CF moto.
@droflivelife
@droflivelife 18 күн бұрын
@SeanFillner actually the reason was to meet euro 5 standards. That's the reason the old one was discontinued. I know this has a heavier crank and new clutch but I have not found evidence of new cam, brakes and cold start being fixed. I'm hoping they have addressed these issues as the bike will be amazing. Happy riding.
@SeanFillner
@SeanFillner 18 күн бұрын
@@droflivelife the head, crank, and camshaft are all new and redesigned. This one comes with a 4 year warranty as long as you use ktm dealerships for your services.
@conjin1
@conjin1 19 күн бұрын
I know this is an old video now, but do you have a better picture of the parts list? At the end of the video, both sides of the picture are cutoff and not readable. Thanks!
@SeanFillner
@SeanFillner 19 күн бұрын
Parts list is available in pdf format at the pac brake website.
@adamjankowski4315
@adamjankowski4315 19 күн бұрын
Sorry but the coils themselves are not rated at 50hz. The rectifier is what you are having and issue with and a standard 4 pin is what you need for a dual coil.
@SeanFillner
@SeanFillner 18 күн бұрын
This bike is probably in the junkyard by now as it was sold years ago....
@33vialli
@33vialli 19 күн бұрын
Hi is the front paddock stand a genuine KTM stand?
@SeanFillner
@SeanFillner 19 күн бұрын
Yes. Husky makes them. Check out my svartpilen build series playlist to see part numbers.
@raulmujica
@raulmujica 19 күн бұрын
I must be a kook -- can't seem to remove the bottom bolt and square-ish bushing from the TFT -- any tips
@SeanFillner
@SeanFillner 19 күн бұрын
It's a t20 IIRC and you need to push it through once it is loosened.
@GraemeRobinson
@GraemeRobinson 19 күн бұрын
Hi, thanks again for posting. I enjoy your videos - don't worry about the haters, I suspect you don't anyway. You might be interested in the Touratech ZumoLock. I use it on my 390ADV and it not only locks the Zumo to your bike but prevents it bouncing off the mount in the event of an extreme front end bottomout, which happened to me before I fitted it. I never remove my GPS from the bike now as I know it can't easily be removed without a key.
@SeanFillner
@SeanFillner 19 күн бұрын
I have a lock for it but since I switch it between bikes so much I don't use it. I am not worried about the trolls on here. Apparently another admin on facebook found out they did this so he removed them from the groups he admins as well. Win win. :D
@markbevans8564
@markbevans8564 20 күн бұрын
Good stuff, thanks for the info.
@guillermoguichal5201
@guillermoguichal5201 21 күн бұрын
Great video. Helped me understand why they wanted me to take the tail lights apart, so I didn't do it. Instructions that came with the racks are OK but don't have any intro describing what you're doing. I had a bit of trouble with the rear bar screws being too tight so I used another screw to thread it first so it would go in easier... but I don't have any power tools.
@benvu2364
@benvu2364 21 күн бұрын
Awesome job!
@JohnBillings-y5c
@JohnBillings-y5c 21 күн бұрын
Hey guys we should keep friendly here. I’m looking to buy the 790 and would like to get some feedback from other people.
@benvu2364
@benvu2364 21 күн бұрын
Great stuff. Just subbed. You know that motorcycles have sequential transmissions right? Meaning you don’t need to use the clutch to up and down shift. While you’re accelerating, just close the throttle completely, and shift up, then get back on throttle. Same for down shifting, but it will lock you out until your rpm’s are low enough for safety reasons obviously cuz it doesn’t blip the throw. Don’t get me wrong, quick shift and auto blip is the way to go, but I wanted to share this knowledge with you if you didn’t know. Basically the quick shift option electronically cuts throttle for that split second so you can up shift rather than you manually closing the throttle, which is way faster.
@SeanFillner
@SeanFillner 20 күн бұрын
On KTMS specifically the quickshifter cuts the ignition while trying to shift for buttery smooth transitions. You won't be able to shift the bike without the clutch/quickshifter due to the transmission design on ktms.
@RoscoPCoaltrain-i6q
@RoscoPCoaltrain-i6q 21 күн бұрын
All of his bikes are in good shape because this guy never leaves the pavement.
@SeanFillner
@SeanFillner 20 күн бұрын
WRONG! I don't film everything. We just rode over 100 miles in the ochocos on the 4th of July weekend. If you watch my adventures with Abel series you will see that the 390 was ridden well over 1000 miles offroad before I sold it. Before making comments/trolling my channel you may want to create your own content first....
@RoscoPCoaltrain-i6q
@RoscoPCoaltrain-i6q 20 күн бұрын
@@SeanFillner RIGHT! I must have missed that part.
@SeanFillner
@SeanFillner 20 күн бұрын
​@@RoscoPCoaltrain-i6qjoined 1 day ago, no subs
@RoscoPCoaltrain-i6q
@RoscoPCoaltrain-i6q 20 күн бұрын
@@SeanFillner is that supposed to be an insult? Why would I have any subs? Is that important? Seems pretty important to you.
@RoscoPCoaltrain-i6q
@RoscoPCoaltrain-i6q 20 күн бұрын
@@SeanFillner it really doesn’t matter I’m done with you anyway. It only took a few videos to see that your content isn’t any good. You’re all about buying stuff. Your bikes are immaculate so stop trying to tell me that you are an off-road guy. You seem to have a problem with criticism so I will let you go live in your Safe space.
@gerrittenberkdeboer7763
@gerrittenberkdeboer7763 21 күн бұрын
dimmes my belongings..
@thedirtyknobs
@thedirtyknobs 22 күн бұрын
We been praying for the lmtv content, moe even offered up his goldfish as sacrifice 😊
@southernhomestead5749
@southernhomestead5749 22 күн бұрын
Good stuff, Thank !
@SeanFillner
@SeanFillner 21 күн бұрын
Glad you liked it!
@SheepGoat390
@SheepGoat390 22 күн бұрын
are those the euro signals? i hate the OEM us ones and want to swap over Great vid btw!
@SeanFillner
@SeanFillner 21 күн бұрын
Check out the playlist I created for this build series. I covered every single thing you see on the bike and more. Thanks for tuning in!
@SheepGoat390
@SheepGoat390 21 күн бұрын
@@SeanFillner i actually did after i commented, sorry i meant to come back and edit this one. lol nice unit bud.
@SeanFillner
@SeanFillner 21 күн бұрын
@@SheepGoat390 no worries
@tomtomtomvandendop
@tomtomtomvandendop 23 күн бұрын
Thanks for the video. Can you provide me a link to the ends you put on the hardwire cable to connect to the acc2? Thanks
@SeanFillner
@SeanFillner 21 күн бұрын
amzn.to/3xKURWJ
@liudasvysniauskas7052
@liudasvysniauskas7052 24 күн бұрын
Hey man, i've got a question about my rear motor. When i ride my wolf warrior 11 my rear motor lets out strange noises whenever i move it, turned on or off, it still does it. It goes normally and isn't slower or anything, but this is my problem.
@SeanFillner
@SeanFillner 24 күн бұрын
Sell it.
@leafybug97
@leafybug97 26 күн бұрын
Hows the repair doing? Still no issues? Thank you for sharing 🏍️
@SeanFillner
@SeanFillner 26 күн бұрын
No issues at all. I have been commuting daily on this bike.
@marcfournier823
@marcfournier823 27 күн бұрын
I don't think Sherpa is a good value. I bought a Colt 17,000 lbs winch. The cheap Chinese cable started fraying immediately just winding it in and out. The motor seized due to corrosion in less than a year because it had no gasket material. Salt water from winter road had infiltrated, and it didn't last the winter. They replaced the motor. The winch tie rod bolts broke the casting. It works, but the colt model is not up to a premium product's standard. You could get the same winch for half the price. I won't be buying another one in the future.
@SeanFillner
@SeanFillner 26 күн бұрын
Well, this one was free because they screwed up my order so I cannot complain about that. We use this winch twice a year and it works great still.
@dylanpage4106
@dylanpage4106 28 күн бұрын
I just picked up a unit with 950 miles and everything seems to work except I can’t access the menu to change the shift light
@thedirtyknobs
@thedirtyknobs Ай бұрын
😊
@sunnycloudy1337
@sunnycloudy1337 Ай бұрын
watching this american struggle with the center stand was so funny, bro, lift from the tail, not from the handlebars lmao
@SeanFillner
@SeanFillner 28 күн бұрын
@sunnycloudy1337 it's almost as funny as your channel you troll....
@Cobra427Veight
@Cobra427Veight Ай бұрын
Hi , can you recommend a easy hook up rectifier 12v . Cheers
@SeanFillner
@SeanFillner 28 күн бұрын
Anything off amazon I would assume.
@arnoldtm31
@arnoldtm31 Ай бұрын
Are you getting full play on the front brake lever ? I just had the dealer install the white grips. The brake lever cannot be installed in line because of this.
@SeanFillner
@SeanFillner 28 күн бұрын
The 2024 790 adventure models have 0 issues with the kit I just installed in this video. Previous years may have issues and some stealerships are incompetent. Why not install them yourself???
@alanahogan2223
@alanahogan2223 Ай бұрын
Btw I see your truck
@GodwinNathan
@GodwinNathan Ай бұрын
Nice one
@SeanFillner
@SeanFillner 28 күн бұрын
Thanks 🔥
@MikeyCandela
@MikeyCandela Ай бұрын
Was there any increase in power to the bike after all set and done?
@SeanFillner
@SeanFillner Ай бұрын
You're funny!
@MikeyCandela
@MikeyCandela Ай бұрын
@@SeanFillner Really? Nothing?
@SeanFillner
@SeanFillner Ай бұрын
@MikeyCandela "said and done". You already know the answer.
@smokey8400
@smokey8400 Ай бұрын
Great video. I'm not sure why Barkbusters doesn't anodize the metal black. Even just the mounts could be black. Almost every bike has black handlebars now days.
@SeanFillner
@SeanFillner Ай бұрын
Because the anodizing would easily come off with every leaf or stick that touches it. Also in direct sunlight the anodizing would disappear in about 3-4 months.
@pullthetrigger23
@pullthetrigger23 Ай бұрын
Hi from Germany, thanks for the video in 2024 :)
@Knockelhead
@Knockelhead Ай бұрын
Is it more comfortable then the stock?
@SeanFillner
@SeanFillner Ай бұрын
Uhm, yes hence the "ergo" name....
@Knockelhead
@Knockelhead Ай бұрын
@@SeanFillner 22 and 23 is alsow alot diff my 23 is stone hard was thinking about the comfort. I'm use to gel
@SeanFillner
@SeanFillner Ай бұрын
@@Knockelhead 23 and 24 have identical seats from ktm.
@Knockelhead
@Knockelhead Ай бұрын
@@SeanFillner you feel like it's a really upgrade? Then im going to buy 1 in winter
@SeanFillner
@SeanFillner Ай бұрын
You can also get the one piece ergo seat as well.