I’m going through the same problem my brotha 1-2selonoid are coming up on reader I might need your help step by step never done machanic work but I do have all the tools
@lifewithderrick5984 Thank you! Quick question..did you have to do the relearn procedure programing?
@claudiacortesrealestate5988Күн бұрын
We bought it already programmed.
@lifewithderrick5984Күн бұрын
No once we put it in and drove it an it worked fine the programmed one is ready out the box you only have to do the relearn if it's not programed from street smart
@claudiacortesrealestate598815 сағат бұрын
We ordered it programmed already but one of the lady said we still hah to do the relearning..so we're confused on what to do??@lifewithderrick5984
@Gr8kngJ6 күн бұрын
I have 2014 Chevy Silverado. P0700 P07096 #3 shift solenoid stuck in off. Will the valve body swap fix this? How do you know if your trans needs to be rebuilt?
@lifewithderrick59846 күн бұрын
Metal in the pan burnt transmission fluid and yes that swap should work fine make sure you change strainer as well when valve body is changed give street smart transmission a call the can most definitely help
@marktaylor146915 сағат бұрын
@@lifewithderrick5984I am trying to clarify your answer. So metal in pan and burnt fluid is bad tranny or swap valve body?
@lifewithderrick598414 сағат бұрын
Burnt fluid yes because with these types of transmission fluid should be changed ever 150,000 miles so burnt fluid will make solenoids bad but a lot of metal in the pan in the pan means you have bigger issues you will have some metal because of friction over time but it has to be very excessive for a replacement or rebuild
@lifewithderrick598414 сағат бұрын
I will be doing a live tomorrow to give updates on mine and q&a to give better understanding g
@jamesethan374923 күн бұрын
If you replaced the TECHM dont u have to take it to the dealer to reprogram it to your car?
@lifewithderrick598423 күн бұрын
Hello no they program it at streetsmart transmission they will ask for the vin number of your vehicle and program it and it will be plug and play out the box
@sempergumby8734Ай бұрын
I got a reman one from a reputable place. Turned out the pressure solenoid exhaust was stuck open causing low line pressure. Burnt my transmission up, but they replaced my whole transmission with a new techm
@lifewithderrick5984Ай бұрын
Good deal I'm glade that issue was resolved and they held up to fixing the issus
@remynyc23Ай бұрын
I have a 6L90 2-3 hard shift when cold once in operating temps it has a flare. No codes all other gears shift fine. Took pan down no metal shaving filter looked good. Any advise would help thanks
@lifewithderrick5984Ай бұрын
I would replace the valve body and tecom mine did the same thing with no codes and that was the problem and because you didn't see any metal thst sounds good that's the problem
@remynyc23Ай бұрын
@@lifewithderrick5984sounds good Thanks for the help
@lifewithderrick5984Ай бұрын
No problem most of the 6l80 6l90 has that problem because the fluid is not changed like it should be and those solenoids is what control the flow of the fluid and when they malfunction it cause shift problems and also change the strainer as well
@illustr8phee100Ай бұрын
Code p0776??!!! Anyone ?? 07 Escalade
@lifewithderrick5984Ай бұрын
Problem with pressure solenoid what is your vehicle doing as you drive
@illustr8phee100Ай бұрын
P0776. It was like it limp I stopped it an cleared it.. change fluid and filter..but it came back after a while
@lifewithderrick5984Ай бұрын
You have a solenoid problem that's in your valve body in the transmission
@lifewithderrick5984Ай бұрын
In that model I think it had the old style solenoid give street smart transmission a call give them the code and they can tell you exactly
@COFFEE-e3pАй бұрын
im having a problem with my 6l90 goind 2nd into 3rd with a delay, still after i bought the tccem, still, but also this chevy 2500hd has 340k miles, a 2007, fluid was clean , no wear particles...they were pretty good to me, i think i,ll just live with it, im an easy driver, just use it for dump runs and collecting firewood....nice video mate stay awesome and safe...put large rocks, wooden tree stumps, large spare wheels.tires when working underneath any vehicle...we don,t wanna see you or anybody doing their next video in a hospital ..take care all !!....coffees on me !!
@lifewithderrick5984Ай бұрын
Hey thanks for watching and also once you put it in just drive it and it will eventually relearn itself mine did that also and if you have any questions or concerns after the install street smart has a great team to help with any trouble shooting
@kenmathis1688Ай бұрын
Hi Derrick ! Did your trans ever quit pulling at all when it got hot ?
@lifewithderrick5984Ай бұрын
Hello ..no it only stalled at stop lights now when it got really bad it was stuck in one gear and wouldn't shift
@kenmathis1688Ай бұрын
I guess at that point is when your code finally showed up ?
@lifewithderrick5984Ай бұрын
How many miles are on the vehicle
@kenmathis1688Ай бұрын
140,000@@lifewithderrick5984
@kenmathis1688Ай бұрын
@@lifewithderrick5984140,000 miles on it
@andresv88562 ай бұрын
What were your symptoms?
@lifewithderrick59842 ай бұрын
When I stopped at the red light it felt like I was rear ended at 5 mph then when I would take of it felt like the truck was stalled then it would go early in the morning it would dri e fine but after everything warmed those same things would happen stalling a bump when it down shifted after comeine to a complete stop
@jagboy692 ай бұрын
If the pan is clean, this is great advice, a cheaper option and worth a try for just 500bones.. But if you are loaded with metal, it's usually game over. The TCCs were garbage and when they burn up, they take out the rest of the show.
@lifewithderrick59842 ай бұрын
Yes that's so true they do have tcc troubles and that's why I showed the pan to but thats great advice
@jre-electriciangulfshoresal3 ай бұрын
Good Job explaining. Good video
@lifewithderrick59843 ай бұрын
Thank-you and thanks for watching I hope it helps
@youtubeisawesome24873 ай бұрын
you have 99 problems, a rust free truck isnt one of them
@lifewithderrick59843 ай бұрын
Lol so true🤣🤣🤣
@codyamrhein89654 ай бұрын
Did wtf are you doing?
@lifewithderrick59844 ай бұрын
Cutting off a rusted pulley bolt
@morgan-51714 ай бұрын
Cheers and thanks for keeping it real bro.. How's this over a year ago I lost reverse and neutral... Did the things you spoke of and it was still the same, no computer so was left thinking it was the clutchs. So it went on the back burner as its my classic old holden commodore ss. After you're clip popped up today I went and fired it up and it's fixed.... How's that. 💯🤫🎈⚚ Holden was in the good book 📙 and you said those magic numbers bro.. God bless.
@gregpecina29444 ай бұрын
Did you use a scan tool to relearn it?
@lifewithderrick59844 ай бұрын
Hello I didn't have to relearn it because I paid for the reprogramming and it was shipped ready to go After we put it in I just drove it untill the tcm corrected itself I think the relearn process is only if you by it without the program
@unwpfdsbeats4 ай бұрын
One question when you said stall out at red lights or at stops meaning the truck shuts off?
@lifewithderrick59844 ай бұрын
It stalls really bad but it don't cut off its like starting off in a higher gear
@unwpfdsbeats4 ай бұрын
Thanks for the info im here in tampa and soon as you said that i ordered the full assembly, i hadonly had a trans pressure sensor switch code but seeing how dirty my fluid was i just said f it let ne get the full assembly
@lifewithderrick59844 ай бұрын
Yes that's the best way to do it that way you won't have to worry later
@vmrobles214 ай бұрын
My brother your spot on with this info. i Have the same issue with my 07 Yukon Denali 6L80 transmission. These mofo shops are trying kill you with a rebuild quotes. I got quoted $4300 i walked the shop laughing 😅. I did my research and i found Street Smart God sent❤.. tomorrow i will do the install and i will give you an update..Watching your revalidated my thought process in this situation was the right move. We gotta keep sharing the info..
@lifewithderrick59844 ай бұрын
Yes Yes!!!so true thanks for subing and let me know how your process work and any questions if I can help let me know
@jakestatefarm3238Ай бұрын
Update?
@getemgone669520 күн бұрын
Yes sir they will, I just got my truck back from the dealership picking my truck up, I just spent $3,700.00 for nothing, so I’m taking my pan down and replace the whole cluster also, I’m stuck in 2nd gear, and no reverse and my code is P0700 meaning it’s the shift solenoid. These 6L80 are good as hell while they’re working but when the break, it’s 15 cases of beer, 4 bottles of whiskey and a bunch of money thrown away like being at the tittie bar lol
@lifewithderrick598420 күн бұрын
@getemgone6695 you are right I'm glade this video could help an also give street smart a call they will help you
@b_lo36hunnit4 ай бұрын
2011 chevy tahoe has a P0752 code and has same issue code says shift solenoid A stuck open
@lifewithderrick59844 ай бұрын
Good point yes sir thanks for the info it all helps👍
@adrianbarraza59295 ай бұрын
Hi, Derrick. It looks like you paid for a pre-programmed techm. If yes, were you able to skip the relearn procedure that requires a scan tool (as outlined in the papers they provide)? Or, did you just install and start driving?
@lifewithderrick59845 ай бұрын
Yes sir the second gear shift was off just a little but the ecm corrected after about the first 6 miles of the trip the bit I haven't had any issues
@jesusmorales33833 ай бұрын
@@adrianbarraza5929did you end up doing the relearn process? They told me I have to do it eve if I pay for them to program it.
@davidcrisler46836 ай бұрын
You should probably walk people through it they want to see hands on
@chuymorales37266 ай бұрын
I have the same problems. But my started because water went in to my transmission. Will this help fix my problems?
@lifewithderrick59846 ай бұрын
If water got in it the first thing I would do is change the fluid and strainer but thats kinda tuff with water
@dblackman956 ай бұрын
Great info Bro
@lifewithderrick59846 ай бұрын
Thanks for watching. I hope it helps
@AshHova6 ай бұрын
Thanks for the video Derrick, Any idea how much one of street smarts recommended shops would charge to swap out the valve body, or do you think i can get away by just replacing the solenoids? I gave a 2011 chevy silverado 2500HD RWD I think my tranny is a 6L90 if im not mistaking.
@lifewithderrick59846 ай бұрын
I'm not sure about their recommended shop prices I would give them a call to get accurate info and as for which part to change I would changing both because eventually you will have to anyway so just give them a call on Monday they are very good
@AshHova6 ай бұрын
Thanks again @@lifewithderrick5984
@zu15026 ай бұрын
P1815- tfp valve position switch starting i. Wrong range . How can i fix this brother
@johnfeather96896 ай бұрын
We have had a couple of those 680s with Cummins in them & between 7 to 800000 mi they had to be inframed so we start getting rid of them before that
@johnfeather96896 ай бұрын
I have subscribe to your channel I have a channel i just started couple weeks ago come check it out its small channel just trying to get it out there it's BTS of OTR Company Driver youtube.com/@johnfeather9689?si=rvXfisEnSupEW6VS
@shanemacdonald-dk7ol6 ай бұрын
Before or after tax.
@lifewithderrick59846 ай бұрын
That's a good question
@michaelhurst65626 ай бұрын
Yeah then you get the settlement.... and it's negative 😂😂😂
@lifewithderrick59846 ай бұрын
Totally , the advertisement is a heck of a drug
@josephb17116 ай бұрын
You have to lease the equipment
@f0rumrr6 ай бұрын
I guess it could be possible if you work 100 hours a week.
@lifewithderrick59846 ай бұрын
Great answer
@moremiatas6 ай бұрын
Better keep 2 log books 😂😂😂
@alfredacarter20106 ай бұрын
This was some awesome knowledge Thanks Bro Keep the videos coming 🙌🏾🙌🏾🙌🏾🙌🏾
@lifewithderrick59846 ай бұрын
Thanks for watching. I will keep them comeing
@CLUBSEEDEELLL6 ай бұрын
Can u do a video on what to look for if you go the Penske or Ryder and route for purchase or any used dealer. Thank you
@motownlee37656 ай бұрын
Trash Trucks will have you out of business before you can even get stared. stay a company until you have good plan .
@bryontharp57906 ай бұрын
Its all good from Diego to the Bay.
@lifewithderrick59846 ай бұрын
Ok
@nexiabiamp6 ай бұрын
So glad I found this channel
@lifewithderrick59846 ай бұрын
Thanks for watching. I hope it helps just want to see people make it more to come
@1991Guru6 ай бұрын
Trying to buy cash truck gotta know what to do , better learn , more green you stay more green you will pay
@JayBando2136 ай бұрын
not at all
@lifewithderrick59846 ай бұрын
10 4
@JayBando2136 ай бұрын
great info 4 folks looking 2 buy a truck
@lifewithderrick59846 ай бұрын
Thank you for watching I hope it can help because I want people to win I went though some crazy things with trucks so this is personal
@brokesttruckeronyoutube32566 ай бұрын
Bro, those are trailer tires on the drive tires
@Hnl9546 ай бұрын
Glad I found you channel sir!. Thank you for info!
@lifewithderrick59846 ай бұрын
You're welcome. Thanks for watching more to come
@Jay-bk5sl6 ай бұрын
I give him 7k for it that's max
@lifewithderrick59846 ай бұрын
Yep that's about it
@frias22876 ай бұрын
Nice one bro 👍
@lifewithderrick59846 ай бұрын
Thanks ✌️
@lifewithderrick59846 ай бұрын
I hope it helped
@VincentCamacho-uo6yv6 ай бұрын
Everything you said was facts bro appreciate the words fr
@lifewithderrick59846 ай бұрын
No problem, I just want to see people make it subscribe for more
@user-ju5hz5nb3r6 ай бұрын
Great info man. Be blessed
@marcuswhite14036 ай бұрын
$19,000 for that 😂
@lifewithderrick59846 ай бұрын
Crazy ain't it
@marcuswhite14036 ай бұрын
@@lifewithderrick5984 very crazy 🤦🏾♂️🤦🏾♂️🤦🏾♂️
@michaelconvey80176 ай бұрын
drive it for 15 out and back then look under the hood