Add a ball valve to pipe to control flow. And you can start it when it is at bottom
@pattysimeone18124 күн бұрын
THANK YOU! Your video & info just saved my exterior door. I’ve already put so much time into this as I had to stripe 8,000 layers of paint off of it. Thx again!!
@TheLittlerbearАй бұрын
This helped me sooo much. My mineral spirits scraping wasn’t as effective as I had hoped. You saved my shelves.
@TwoPartyIllusionАй бұрын
Thank you! Refinishing a new teak shower mat that I want darker... ❤Jenny in Boston, Massachusetts
@Dj_MikeB_Ай бұрын
how will it do with play sand?
@alc6284Ай бұрын
would this work if you forgot to wipe access oil on decking? A couple boards are tacky because I didn't wipe away the extra oil ...
@madarainАй бұрын
Thanks, man... my problem exactly.
@eddevarona8448Ай бұрын
How often did you have to stop to clear the pump?
@jeffreykountz3743Ай бұрын
Yep...sounds about right...i put too much on and left if obernight...same shit happened nice video
@ashyslashy5818Ай бұрын
Thanks
@KMG68Ай бұрын
Thanks for the vid! Is it OK to use a 120 first and finish with a 220 without running into this issue?
@besttech3216Ай бұрын
Thank you.
@pilartapia86772 ай бұрын
Thank you for your video, right to the point. Your method saved my floors.
@melissagraham61802 ай бұрын
Thank you for posting this advice! Like so many others, it worked for my issue. Just wanted to leave a comment to help the algorithm for others to find this, too.
@TheWitchofWhiteTailHollow2 ай бұрын
Thank you!
@kathleeng11162 ай бұрын
Very helpful!!! Thanks!
@abruehl3 ай бұрын
Any advice for what to do if too much stain was applied and then the finished clear coat was also applied? 😬
@dianepollard2493 ай бұрын
Thank you. Saved my project by following this simple advice.
@PapaMav3 ай бұрын
Thank you for this vid, I did exactly what you did (too much and 1 coat on top of the other).
@KapowNoodleBar3 ай бұрын
THANK YOU!!!!
@janinegraff86944 ай бұрын
Done my dinning table twice making the same mistake. Thanks for your help. Works well.
@LaMartinRivers4 ай бұрын
Thank you so much for this video.
@Bsr2794 ай бұрын
Awesome video. Thank you for making this!
@user-fh6wo8zc7z4 ай бұрын
7:07 pm March 10,2024. I am so glad I found your video. You helped me greatly. Thanks so much.
@coreyhutton4784 ай бұрын
Like MOST Videos On KZfaq, This Is 90% LONG WINDED TALKING ABOUT NOTHING! LOL!
@deanvanlaarhoven14134 ай бұрын
Best frog video ever! (and I thought those sounds we're from a squeaky toy.)
@EmpireRiSing5 ай бұрын
I hope this works for my project everything else is talking about scrubbing with mineral spirits which I don’t wanna do so hopefully this works
@themama36335 ай бұрын
Damn I just your honesty. 👍
@napadila5 ай бұрын
Awesome video! How did you get that dark color in the end? I have that same problem where when I wiped it off it was really light.
@jas50505 ай бұрын
What happens if you put stain on and then sealer?
@traceyc8226 ай бұрын
Super helpful! Thank you!!!!!
@teridoty42856 ай бұрын
Thank you - I left a 2nd coat of espresso stain on a project because I love when it looks super dark but not black - and it turned sticky, so here we are. I have faith now I can save the project
@Jrenglehorn6 ай бұрын
This is awesome. Planning a similar project this summer
@tech4life3657 ай бұрын
Did the finish adhere ok?
@franklobo25797 ай бұрын
This is exactly what I wanted!!! THANKS
@clevo31708 ай бұрын
Thank you for the video, I may not have to start completely over now.😅
@nazneenkhaleeluddin77488 ай бұрын
Thank you so much. I'm going to try this. I messed mine up pretty bad. I'm a newbie to all this
@hulklu18 ай бұрын
Thank you so much. I was able to fix my project with your method.
@joc-elynsorrells62108 ай бұрын
So I got my floors done , it’s been 4 days and it’s still sticky . The guy used Varathene and it’s not drying .
@gabiejensen42278 ай бұрын
I am also dealing with this same issue of tackiness but on a piece of furniture. I sanded it down but am worried as the cracks/crevices on the detailed parts of the furniture are tacky. Any suggestions for how I might fix this?
@gavinlimshung28479 ай бұрын
Hi, Architect here, it's good what you did and it should be ok but just be mindful that you placed the blocks in the wrong direction to keep the blocks' actual structural integrity. Over time, climate will wear it out. Another option is to fill the blocks with aggregates or portland cement.
@CS155509 ай бұрын
Thanks for the insight! Solved my problem, thank you.
@jbsdiygarage9 ай бұрын
More than welcome!
@GamingGF999 ай бұрын
Thanks so much
@GamingGF999 ай бұрын
Thanks that helps
@lionsblood3219 ай бұрын
Awesome and no ad’s! Great vid!!
@metaplexstudios266810 ай бұрын
This put my mind at ease. Thanks! Glad I don't have to get my palm sander out again....
@jbsdiygarage10 ай бұрын
Glad to help!
@Mardevscience10 ай бұрын
This is exactly the problem I have right now. I use too high a grit (220) and it wouldn’t grab the stain. Then I added more and now it’s all sticky. THANK YOU!!!
@jbsdiygarage10 ай бұрын
More than welcome!
@aquaholicdrinks539610 ай бұрын
Thank Youuuuuu so much
@saleembhatti485210 ай бұрын
Thank you buddy... this helped me a lot and cheaply ❤ Edmonton, Canada.