Are you still selling the KM Cordless (model 9596-200) ? Can't find it on your website anymore, but can find it on amazon, etc. Or did the KM10 and KMC+ replace it? Trying to find one that works for our 60lbs golden doodle. It's been difficult finding something that doesn't jam up almost immediately. Thanks!
@WahlAnimal9 күн бұрын
No the KM Cordless is discontinued. From now moving forward, we will be selling the upgraded KMC+
@slandshark9 күн бұрын
@@WahlAnimal Thanks for the update. I noticed the KMC+ is nearly twice the price of the KM Cordless that has been discontinued. What are the upgrades in the KMC+ that are justifying that price increase? Also, if we manage to buy the KM Cordless and need replacement parts in a year or two (such as a battery), will parts be available?
@dirtysocks53511 күн бұрын
Is it comptaible with wide blades? Also, does wahl plan on releasing wide baldes in the future? That would be amazing!
@WahlAnimal11 күн бұрын
Wide blades are definitely on our radar!
@brandiamulet732518 күн бұрын
My new KM10 cordless is louder in both vibration and sound compared to my corded KM10. What is the difference between this and km10
@WahlAnimal18 күн бұрын
This is also a cordless unit so it will be lighter in weight. It has more power than the KM10 and KM Cordless with two speeds at 3,700 & 4,500 rpms. It also has a new ergonomic design.
@ghostymeow18 күн бұрын
What is the difference between this and the km inspire?
@WahlAnimal18 күн бұрын
Many differences! For starters, this is a cordless clipper. It has two speeds at 3,700 & 4,500 rpms. It also has a new ergonomic shape.
@ghostymeow17 күн бұрын
@@WahlAnimal thanks for responding! Are you able to advise the difference between the km10 corded version & the KM inspire?
@WahlAnimal13 күн бұрын
@@ghostymeow The KM10 will have more power than the KM Inspire.
@linenleslie6870Ай бұрын
The video is missing this important part about switching the blade... use a flat head screwdriver to lift the little middle part out so the blade can slide onto it. I tried to attach a photo from my instructions but youtube doesn't let me.
@carmenallen42532 ай бұрын
How do I purchase these
@kayladonnrichardson73844 ай бұрын
*** CORRECTION ** You don't REMOVE the screw. You just LOOSEN it a bit. If you remove it, the entire drum will come off. You only loosen it a bit to reduce the drum size so the sanding sleeve can come off. Once you've placed the sanding sleeve you want on, then you tighten the screw to expand the drum inside the sleeve.
@traceyhambling10154 ай бұрын
I found my KM5 would not cut through a poodle coat with a snap on guard
@aimk52714 ай бұрын
Too damned rough! FIRED!
@getinthespace7715Ай бұрын
Lol. To each their own. Looked effective and efficient to me.
@erinlight50205 ай бұрын
What blade
@Heavenlystardust6 ай бұрын
Wonderful video here, thank you! 🤩
@MandaLovee136 ай бұрын
What is the product with the long nozzle that’s sprayed inside the blade?
@aquaandsage6 ай бұрын
Thank you, I was on the Wahl website and this exact part wasn’t shown in the video supposed to be explaining how we get blades off and especially back on.
@judyhoomalamalama6 ай бұрын
there is a blade that is on the wahl but there is no mention of how this will work on a long coated dog. The instructions mention the other blades included in the package but not the one on the clipper itself. I am confused . Will try and use this but dont want to hurt my dog.
@nolosangeles6 ай бұрын
The instructions do not instruct to remove screws. Waste.
@monalisasmoustache7 ай бұрын
Surprised that a 9 year old dog is so adverse to the clippers and disappointed that there are no safety tips other than hot blades (?) and are some Wahls hot and others not, and no explanation for what the "comb" is for or does.
@johnsfavoritechannels29597 ай бұрын
What blade setting are you using? 1, 2, 3?
@AngelaHastyWilson8 ай бұрын
5 in 1 SETTING bc nobody else can dang say and I had to search way too hard for the answer To use a guide comb, first set your 5-in-1 blade to position "1," then snap on the plastic comb attachment.
@deborahgwathmey31078 ай бұрын
This video isn’t NEARLY SPECIFIC ENOUGH to help put the assembly back on!!!!
@bonnieh887410 ай бұрын
At 0:17, it reads "push down to open up..." Push down where? My clippers aren't working like they did when new, even after cleaning and oiling. In my manual, there's no mention of putting an index card or pipecleaner between the blades. Thanks!
@OWK00010 ай бұрын
Do brushless clippers have more torque? Ok googled it and it works for power drills so I figure it works for clippers, too. "Without brushes to cause friction and slow things down, brushless drills pack more power and torque. They can reach higher speeds, too. "You can expect a 15 to 35 percent increase in performance compared with a brushed motor drill," says Banta." Cool.
@Leoprincess303811 ай бұрын
Her coat is beautiful too
@rayneshiagainey21111 ай бұрын
My bar does not slide out like yours, only the band help
@audrey9640 Жыл бұрын
Just look for another video people. This one is useless
@audrey9640 Жыл бұрын
This don’t tell me anything
@sarahlunt5630 Жыл бұрын
I don't know why I can't figure this out. but which one it the #9 and #40? is the 0.7 a #9 or a number #40?
@barbrepsher3159 Жыл бұрын
That’s too easy. His coat is smooth and no mats. Looks like my sisters. Mine has the poodle fur 😫
@FaithViolaxo Жыл бұрын
What is the needle that keeps up the drive? I lost mine and I see no information on it. Please help!
@JasonGabler Жыл бұрын
"I grew up in a kennel" :D. Goodness, I hope they didn't feed you kibble! But, seriously, thanks for making this video!
@alfred_neo Жыл бұрын
WAHL KM10 price in AMAZON it is correct? 3990 aed? 0:37
@tinayoung-pg4eu Жыл бұрын
How do I seriously access your prodict?? It is nealey impossible t0 get ot out of.tjr packagin4
@mousemode8758 Жыл бұрын
mine does not come off wth
@NanaGagie Жыл бұрын
Great video but not informative
@roseannaknox5470 Жыл бұрын
So i am finding a groomer like me been grooming for 25 years love your grooming
@sharaleetanes Жыл бұрын
Good job 👍 😊❤ The dog is cleaned.
@ruthperin6576 Жыл бұрын
Horrible instructions!
@alielf285 Жыл бұрын
My wahl km5 didnt come with any guards … i also cant find anywhere i can buy them…
@dizzolve Жыл бұрын
Hate to see the puppy coat go. It's the most beautiful they'll be. And their adult coats are no slouch but that puppy coat is completely different
@fernimura1225 Жыл бұрын
i need the clipper you use and blade please
@SassyDogFashions Жыл бұрын
Are you pressing a button when you put it on? I feel there should be subtitles on your videos because there’s nobody talking about what is being done. We can’t get the blade on
@ritageorge2348 Жыл бұрын
Very confusing, please inform us viewers which metal blade setting do you use with the clip ons. Also on a normal metal blade with just the exact setting on settings why do the clip on blades not work so well.
@GrammyB4863 Жыл бұрын
How come my clipper keeps getting clogged. New km10. Purchased blades. Started out great but stopped working so well. Clean brushed Aussiedoodle. Help! Any advice? Well lubricated clipper also