could probably open that case with a screwdriver lol
@FromTheHood2TheWoods25 күн бұрын
Dude, what the hell! I’m a mechanic and I build houses from the ground up! This damn thing the screws that have it attached to the plate just keep spinning and spinning. There’s no way to get the nuts off! What the hell?
@cantbuyrespect28 күн бұрын
just found one like this for $70 on ebay and I am happy with it.
@TroyOttosen-jg7ttАй бұрын
I will take our Alaska anyday! I see Washington ones unfortunately moving up here to Alaska all the time!😳🤣🤪
@scottwillson5562Ай бұрын
does anyone know what the rectangle cushion is for?
@jamespolucha8790Ай бұрын
Very nice, everything from china is NOT junk, everything is made in china anyway, I’ve purchased a lot of stuff from china that was good quality, I don’t care where it’s made as long as it’s good and the price is right
@felixdada4416Ай бұрын
Which relais do you use? Do you have a link for it?
@dingalsbe88Ай бұрын
I just bough some cheap relays off of amazon. similar to these... www.amazon.com/ESUPPORT-Harness-Waterproof-Electrical-Automotive/dp/B00RWV470O/ref=sr_1_3?crid=1QAE41GC1ECJX&dib=eyJ2IjoiMSJ9.rim1vNmKvLcss0AcfxOGSGLPIR_Htc3brEnYcuUX1JSIksZCZoDeaYn_fWIQu3hs_rpTOUPOUSUINcmv8oDM1SNVjxv3kXo4pCEOkLUKJ8Pv797DheKDFikku5NJrxYLIewYO44Oery2eeGd0l6Svp2obgvVVQMBcG6U-GIOOyepvxba5xSbmYAHN8fLaFX9WYzR8jJS7fgLVbNaDbkXW1ue1e-NAkcFf1k2tiCtdpY.kcqRQtPbB0p_h4NOAiUVFzT86uZW6sQ28nJ4aBNoROI&dib_tag=se&keywords=automotive%2Bmini%2Brelays&qid=1719938666&sprefix=automotive%2Bmini%2Brelays%2Caps%2C147&sr=8-3&th=1
@BaburtoooАй бұрын
What’s the mph
@dingalsbe88Ай бұрын
@@Baburtooo 25-27 depending on how much weight I have in it.
@timg185Ай бұрын
Are you able to run up in shallow rivers with this . I’m thinking this might be a cheaper alternative to jet drives.
@dingalsbe88Ай бұрын
@@timg185 yeah, 1 foot of water. But it’s sketchy
@ChooseLife.YourLifeАй бұрын
Actuallyyou only need to pull it with the notch. It works on atleast 1.0mm² cable. Haven't tried it with 1.5mm² or 2.5mm² yet.
@warpdetourАй бұрын
Thanks for coming out! Richland is rad AF!
@dingalsbe88Ай бұрын
Thanks for playing that old banger!
@okanal1974Ай бұрын
Does it work for 25 mm handlebar?
@dingalsbe88Ай бұрын
I do not know, my bars are stock.
@kpnitrl382 ай бұрын
Nice hall.
@mikhailyakubov5832 ай бұрын
не проще обрезать ножом на пальце и содрать изоляцию зубами? и смачно выплюнуть на пол))
@jimmyjames18073 ай бұрын
a couple of things, yeah u can buy it with a backrest, just follow ur own link, second thing, really dont go buy cheap boxes from china then complain the hardware and the cheap locks, what did you expect
@dingalsbe883 ай бұрын
LOL, having a bad day?
@zedrouhancayon78033 ай бұрын
I like that machine for fishing her in Philippines, how much is the price?
@waynetaylor31093 ай бұрын
Do your side cases open from the top? And if so, if I order the 55lt top case do you think it will interfere with opening the side cases? Thank you!!
@dingalsbe883 ай бұрын
Mine open from the top, not sure if you’ll have clearance issues.
@motorcyclistfromholland88563 ай бұрын
110 euro on temu for 45 liter
@SUPERFLUID883 ай бұрын
Had a dealer said to me oh those amazon Chinese made accessories are garbage they’ll crack if you crash lol I said to him well if I crash hard enough to knock the box off the bike the box will be least of my worries, then he tried to sell me a box for $1100 plus tax lol.
@cozziwysong39054 ай бұрын
just got one for my 1750 a v twin 20hp
@freshnorthwest67564 ай бұрын
I remember hanging out in Jordan's basement while they were practicing and creating music. Good times!!!
@dingalsbe884 ай бұрын
yeah, we spent many hours down there making music.
@cozziwysong39054 ай бұрын
man the look on youre face sold me buying one now that looks fun as shit
@dingalsbe884 ай бұрын
dude, we've already been planning a second jon boat build... we just feel like the more people we have out on these things the more fun its going to be.
@cozziwysong39054 ай бұрын
@@dingalsbe88 picked one up friday with a 20hp honda motor put it on my 1750 then saturday went and picked up a 1546 tracker looking for another motor for it now
@donovanswift50104 ай бұрын
Holy shit someone else is into mudskippers AND fpv??? subbed just for that
@dingalsbe884 ай бұрын
I do need to dust my sticks off, it's been a while..
@gerbenposthumus88784 ай бұрын
You must be a amateur if you don't know the lock ring has to be upsidedown with thin grinding disks. Everyone who's working a lot with angel grinders knows this, so how can you doing a review about angel grinders if you have totally no knowledge about this product
@theflyinggauntlet4 ай бұрын
I paid £77, around $100, for mine.
@user-fc2jy8mu1c5 ай бұрын
Kota sorong suda adaka belum
@user-fc2jy8mu1c5 ай бұрын
Kota sorong suda adaka belum
@monkrutherford5 ай бұрын
Well any updates I’m from Walla 2 and been looking at this guy for future work.
@dingalsbe885 ай бұрын
Oh, I wore them out and tossed them a long time ago. My favorite boot store went out of business here in Kennewick, and I have not been able to find new ones. Good boots, I'd buy new ones if I could find them locally, but they are pretty light duty. My new JK's are much better quality.
@PalongzeMotorenWerke6 ай бұрын
You can get this 45Litre box for USD60 here in Malaysia.
@mattgolding75576 ай бұрын
Nice initial review….im sorely tempted….dont suppose you have a link for this please ? Also, how’s it matching up now you’ve had it a while?
@dingalsbe886 ай бұрын
I don't have a link for it... it's sold under a different name on Amazon now. It's an alright box, it does the trick.
@chris91636 ай бұрын
Man we have a predator 459 with the same drive on a 1436. And it feels so sluggish even with one person Any suggestions?
@dingalsbe886 ай бұрын
that's probably too big of a boat for that motor.
@jeremybahm21634 ай бұрын
I had a 1542 boat with swamp runner 420 was getting 15 up river and 18 down
@cinaannie73387 ай бұрын
Cool!
@g.h._49687 ай бұрын
does this also work with a swiss champ? i mean the distance between the blade and the bottleopener is much farther. and the twisting should be rather cumbersome .Anyone tried this with a swiss champ?
@dingalsbe887 ай бұрын
I do not know
@derekroybal86197 ай бұрын
Thinking about buying this. How has it been holding up?
@dingalsbe887 ай бұрын
We used it all summer, it went out on maybe 10 fishing trips... as of right now it wrapped up in a tarp because it winter un here in the PNW. Its pretty stout really. The only thing that took any damage was the prop, and that was only because we were cruising in about 8" of water.
@derekroybal86197 ай бұрын
@@dingalsbe88 right on brother, thank you! I’m from the PNW myself. Just saw your white pass video, I used to snowboard there all the time. Currently live in Utah though.
@dingalsbe887 ай бұрын
@@derekroybal8619 yep, we go there often.
@garyrogers5078 ай бұрын
Is your clutch that turns the prop disengaging at idle? I am having problems with mine not disengaging with the predator 459.
@dingalsbe887 ай бұрын
Mine wasn't at first. But after a few break-in trips and turning the idle down a little bit, it now disengages.
@lindalei59528 ай бұрын
Hi nice video, we are the direct manufacture for the motorcycle top box, including 25L/28L/36L/45L/55L/65L/80L and 100L. alluminum alloy , waterproof.
@dingalsbe888 ай бұрын
cool, it's a pretty solid product...
@Kochi3068 ай бұрын
Hi, Which Case do you using for the mando? Regards from Germany!
@dingalsbe888 ай бұрын
I think, and I'm pretty sure I bought it off of the Musicians Friend website. I browsed their website and I don't see it as available anymore, sorry.
@Kochi3068 ай бұрын
No problem. Thx anyways
@michaelmacleod9 ай бұрын
The switch arrangement makes it dangerous, spend another 10 bucks if you wish to retain the ability to pick your nose.
@dingalsbe889 ай бұрын
LOL... Ya, it's not a very good tool. It hardly has any power... it's not like a corded grinder at all.
@californialovefishing64639 ай бұрын
What size is your boat?
@dingalsbe889 ай бұрын
12 foot
@daviddrabek583410 ай бұрын
Just ordered mine, looking forward to putting it on my AT
@daviddrabek583410 ай бұрын
Found mine new on EBay for $128
@dingalsbe8810 ай бұрын
it's been a decent box for me... the bottom latch failed on me, the rivet broke that holds the lock together. It was an easy fix.
@daviddrabek583410 ай бұрын
@@dingalsbe88 I’ll be sure to look mine over. Thanks!
@submissionoutdoors57010 ай бұрын
how big is the john boat?
@dingalsbe8810 ай бұрын
12 foot
@andrewalexander736310 ай бұрын
I heated a flat top screwdriver with a torch and pushed through the plastic cover to open the latch. Great video as I never would have been able to do that without you!
@dunyamisafiri694410 ай бұрын
Thank you for the video!
@dldimick9268310 ай бұрын
That looks like you guys had a blast! Nice work!
@sidneysilva917111 ай бұрын
Aí é bruto top de +
11 ай бұрын
Thanks
@darinsroka823411 ай бұрын
What size boat is that?
@dingalsbe8811 ай бұрын
12'
@crash71x11 ай бұрын
Today Years Old!!!
@tylertrebenskke981711 ай бұрын
What size of prop is on it ?
@dingalsbe8811 ай бұрын
9" aluminum
@turtsable8 ай бұрын
@@dingalsbe88after using it for the last few months what’s your thoughts?
@dingalsbe888 ай бұрын
@@turtsable my thoughts are that it is time fore some carb and exhaust mods. I'd like to run the exhaust straight out the back so its not so loud coming out at a 90 right into my ears.... and jet the carb for some more power.. neither are necessary though.. its a blast to jam up the river in such shallow waters.. it's a ton of fun and turns a lot of heads.