@20:11 that wasp was getting pretty close to Tom.

I put a second button at the actual door no need to run from the button. I fell once thats all it took to make me change the hook up

I am having my new inground pool patio poured next week with the slate finish. What would I put down for sealer. As I don’t believe the concrete guys are doing anything to seal it.

I give you and your guys a B+ great job as always

Tom, first hello from North Carolina. Then, question...are you familiar with chairs to lift WWF and reinforcing bars from the coarse aggregate? These do help with tensile strength but not when lying on the coarse aggregate. Of course, no chairs are going to support the weight of a concrete truck.

looks amazing tom as always!!best on you tube

funny tom I was wondering how you were going to edge the concrete where you stopped the plastic!!! we do the float swirl finish a lot here in New York

TOM, watching yinz fill the buggy with gravel, was just wondering if when you pulled up to the tailgate, turning the hopper 90°, would you able to get a fuller load? Looks like it would fit under the tailgate but, what do I know, I ain't there.

Awesome work on both driveways!

👋🏻

Moneys in the detail!!

👋🏼

Very nice job on the "swirls "/rosettes were very popular if not the only way that was done in earlier years, another lost art. Broom finishing came later. Great job Tom and crew as always. Have a wonderful weekend.

I'd rather had that driveway extension and trash can pad square all the way. If they don't drive a trash can we'll. The wheels will run off into the shrubs!

Another great video, I’ve never seen a driveway with that finish but you made it look great. Shows skill that the guys had all those swirls exactly the same, no other channel on KZfaq would ever try that style or if they did they were to embarrassed to show it.

Tom....You guys do Outstanding Concrete Work. Detailed, Detailed, Detailed! Amazing!! I wish you were in my area

Hi guys , just wondering how come you never use the electric vibrators?

Have you ever been sued?

Where is jeff, MUDDY FEET

Nice job on the finish

don’t be hard on yourself you guys are top notch that pattern is cool I’ve seen it before I like it

Rosett mag finish. I've done that a lot in my career.

Good video Tom and crew

Is all that work in the same neiborhood? If so u got that neiborhood on lockdown.

I hear you mention the threat of getting sued. That really needs to change. If someone crosses a barrier like that and hurts themselves it shouldn’t be on you. I never think that I could sue for anything if it was my fault and it’s happened many times. I pay for it. 😊

Love the pattern on the first drive ! Never saw that Finish before !

Wheel Horse became Toro in the mid 80s

Another excellent job(s) by Tom, Steve and crew. Keep up the great work. Wish I could find a great crew like yours in NH.

I to like the swirl pattern. First I’ve seen that done. Concrete art. 😊

I would give you a A on the first job, you found the mistake and fixed it in time and it turned out really well and the other pours are lined up and done.

I give your crew and videos an A+

Definitely not like you guys to miss anything. It's bound to happen though, just almost never w TSH. The swirl? Y'all made it look good, but that pattern looks better on a plaster ceiling. The broomed, picture frame is a fantastic look and function. I choose the latter. Matt's cousin, 17 years apart. My first cousin shared weekends w me most of our childhood days. After we moved out of state in the 9th grade era, that was it. I moved back here 6 years later, but now we live just 15 miles away from each other, but only see one another at Christmas or a funeral. Go figure. Comments. I've been amazed since my first video, how you find the time to read, let alone reply, to your comments. Anyone who knows you at all knows how incredibly busy you stay. I certainly am very touched and honored by even a heart reply, but please know, a reply isn't expected. That won't affect my love for this channel one bit. I've spoken to you, your wife and daughter over the phone, on a surprise call one Sunday morning! And you gave me a TSH t-shirt!! I call that over and beyond all expectations!! Im a true, dedicated fan of this channel, and a friend to the Hauses. No replying necessary or needed. Comments, though, help a KZfaq channel, so comments are necessary. I comment to let you know im still alive and still a fan, and to help keep my favorite channel operating. Not so you will reply. All i want is for you to keep the camera rolling!! As always, thank you for sharing!! 👍❤️🙏🇺🇲🇺🇲

6/7/24..Howdy from New Orleans area🎉 so Tom I do like all your on site videos & yur shop (wood & maintenance) work. Gotta say am not keen on all your 'stamp'...& today 'swirl' (exact lay out 😶) due to dirt accumulation over (few months) time. Thus all your hard work & beautiful finish, will quickly be in need of psi washing to restore the beautiful appearance. I have asked you about this before in response to an earlier video of 'stamping' & dirt build-up. You were kind enough to respond saying you would show how stamped surface looks after few months, implying no need for frequent psi washing. So Tom waaay down here we have lots of rain & wind carried pollen & other 'tree dust'/debris which all too often turns our Smoothe surface cc into a blotchy, ugly, nasty looking area. This requires psi washing to return cc areas back to A+ looking. So Tom, how about a return trip video to one of yur older.. 6 month old...jobs for a look? Yes I expect some dirt staining in the little groves but I believe...more (stamped-in) gruves/etchings =more & faster dirt build-up requiring more frequent psi washing to restore all your work & great looking appearance. Know I am a 78 healthy youngster & do lots of handy man jobs & enjoy psi washing jobs...all that water splash🌊 keeps me cool in our warm climate💪😊. So Tom, grab yur camera & show us a few of your 6 month old stamped jobs. Maybe a comment from t owner (relayed by you) on appearance, satisfaction of 'stamp job' after a few months...or years. Thx Tom! Always watch & enjoy your making yur videos...& showing grand kids 'supervising' your projects!👍😇✅️👨‍🔧🍺😊

Used to do a lot of the swril pattern back in the day but we used a brush , was not as smart as you with just the mag. . Great good on today’s videos!

I liked the interview with Eddie. I wish you could get interviews with the rest of the boys but I can see they're too camera shy.

Do you ever do exposed limestone?

NEVER SEEN SWİRL PATTERN

I really like that swirl pattern. I'd call that 45 angle a gusset. We use to add those in roll cages, back in the day. Was that a Challenge Coin?

It's good that you are able to see 👀 any mistakes in your projects. The only thing that I see about the blocking was that. When it's dark nothing has anything with reflective tape on it. Plus into the street you might have some traffic control cones along the curb area. It will take some of the liability for any damage that may damage if God forbid running into the hole .

Swirl pattern is nice when the swirls are even !! You might want to stick to a broom finish !!

Morning Tom, A C- might be a tad tough. Hey we all miss things at times and seriously that is rare for you and your crew. B maybe. Maybe don't feed 'em today 😂😂. Just how far do your talents extend?? Last video you showed us your silent movie skills and in this video we see your prowess as a potential US gymnast. It's never ending with you 🤭🤭. Got to admit the "swirl" finish won't make my top 10. To each their own it's said. I believe you found a t-post driving machine there in the new guy. Chris--isn't it?? It's always nice to get a reply from you, but it's not expected. Part of the problem with growing in your fan base. Mike replies to very few these days other than a ❤ or a word or 2. Most fans shoot you a quick comment where idiots like me write a letter sometimes. I'm just chatty I guess. Good video as normal. Closing in on 60k. OH, I hear those battery operated STIHL mowers are flying off the shelf since Mike debuted it. Only $25,000 or so it was reported by a couple of fans. Tell whoever was asking about a new mower 😅😅😅

I like the swirl pattern 👍 Don't see that much around where I live. Good video 😊

Tom did you mean Wheel Horse. They were great machines as well as Bolens and others. Back when machines were built like a brick outhouse. More fine looking concrete.

Not that needy don't need you to answer every comment enjoy the videos enjoy the work that you do quality and I'm a neighbor of yours just a little bit to the north thank you for doing all that you do five stars

Like the swirl pattern!

Do you eboxy the bar into the brick when connecting to existing structures?

GOOOOOD MAAAAAAAAWNIN EVERYONE & HAPPY TGIF!!!…Tom don’t feel you must comment on every post. I believe it’s beneficial to your channel the more comments you get? If not, I’ll shut my pie hole 😂 & just watch Yinz guyz work your magic…Tom your so awesome & real. Very cool to introduce the long lost cousin & give him a push for his music. Keep up the great work. Have a day 😊

Ur comments don't work

A solution to your “problem” is to keep your container hidden from the crew. 🤪🤪

So impressed wow! Perfect color and the look is amazing!!