Valentino Interiors

Пікірлер

@a.j.carter4572 3 күн бұрын

I have the same type of subfloor in my entryway, but it has layers of old paint that can't be sanded off - can the same process of adhering the backer board be done in my situation?

@valentinointeriors3023 3 күн бұрын

Hi . Ideally you want to scratch the paint off. Use very rough sand paper ( 40 grit ), or an electric planer if possible. A very good wood primer for tiling and then the steps from the video .

@a.j.carter4572 Күн бұрын

@@valentinointeriors3023 Thank you!

@RJG772 3 күн бұрын

From America ... this was a fabulous video. Yes I learned quite a bit, and your embedding into the video situations on tongue and groove, standard butt joint flooring, different level, ... all of it was terrific. Thank you.

@valentinointeriors3023 3 күн бұрын

Thank you for your appreciation 🙏

@zoiatapliga9081 6 күн бұрын

👍👍👍

@gavincollins9376 7 күн бұрын

To mark out your male cut you could have laid the F cut on top, marked out on the top and transferred to the underside.

@valentinointeriors3023 7 күн бұрын

@@gavincollins9376 Every time you are transferring a mark it could be less accurate. This way is quicker.

@danielpd7631 8 күн бұрын

Do you work in London, UK?

@valentinointeriors3023 8 күн бұрын

Hi . I used to work in London. I don’t live in Uk anymore.

@iJoemo 9 күн бұрын

Super helpful video, thank you sir 🙏🫡

@valentinointeriors3023 8 күн бұрын

Thank you 🙏

@InterMeLocal 9 күн бұрын

Great Job 👌

@valentinointeriors3023 9 күн бұрын

@@InterMeLocal Thank you

@zoiatapliga9081 15 күн бұрын

👍👍👍

@chriswatts1909 16 күн бұрын

This is a great informative video. Thank you.

@valentinointeriors3023 16 күн бұрын

@@chriswatts1909 You are welcome 🙏

@adamlucas7059 19 күн бұрын

Great video mate, but you don’t explain why you left 14 centimetres? Instead of 10 that the company states. Can you please explain ?

@valentinointeriors3023 19 күн бұрын

@@adamlucas7059 Thank you . I left 14cm because we did herringbone pattern tiling . I wanted to cut the tiles on the edges after installation. The border was 10cm and I left 14cm just to make sure I will not cut the wires. There is a video on the channel where we installed the tiles . This will explain this in more details.

@charlesmcwilliams5642 20 күн бұрын

Excellent video

@valentinointeriors3023 20 күн бұрын

Thank you

@charlesmcwilliams5642 20 күн бұрын

Excellent video! Please list the insulated boards used? Thank you

@valentinointeriors3023 20 күн бұрын

@@charlesmcwilliams5642 Hi . Thank you for your appreciation. Please see below: www.theunderfloorheatingstore.com/products/prowarm-tile-backer-board-backer-pro

@rss2030 21 күн бұрын

thanks for the vid, if I only wanted to cover half the floor with the underfloor heating, do I just need to insulate board where the mats are? do I just use self level screed to level up the rest?

@valentinointeriors3023 20 күн бұрын

@@rss2030 Hi . You can do that. If you do insulation board everywhere is a better result. This way you are not losing any heat and also it will be easier to get a level floor everywhere. It will not work out much cheaper to do levelling compound .

@rss2030 19 күн бұрын

@@valentinointeriors3023 Thank you

@klaudiacocean Ай бұрын

Always the best work 🎉

@valentinointeriors3023 Ай бұрын

Thank you 🙏

@ajducey1868 Ай бұрын

Thank you soooo much for this video! You are awesome! I have been looking for a video on how to tile over my t&g structural flooring. I have Laticrete Next Level Plus self leveler. I'm thinking I'll need to add fiber to it.

@valentinointeriors3023 Ай бұрын

Hi , thank you for your message. If the self levelling compound is flexible ( this should be written on the bag ) there is no need to add any additional fibres.

@zoiatapliga9081 Ай бұрын

👍👍👍

@RogaineSpuma Ай бұрын

meserie

@valentinointeriors3023 Ай бұрын

Mulțumesc 🙏

@mrjh8467 Ай бұрын

What type of insulation are you using?

@valentinointeriors3023 Ай бұрын

Facade stone mineral wool FKD-S Thermal

@zoiatapliga9081 Ай бұрын

👍👍👍

@cal6747 Ай бұрын

Perfect, thank you.

@valentinointeriors3023 Ай бұрын

You are welcome 🙏

@JMercCCITLD Ай бұрын

What makes you decide to not use the standard silicone flexible membrane backing for hardwood floors in this application? I can’t think of the exact name of what I’m referring to but it’s usually orange silicone type backing that goes on I see sometimes after the thin set which I presume would be used to partially level it out where it is close to that anyway. I guess I’m asking in part why no membrane here or you just prefer that first material you mentioned (insulating board?)?

@valentinointeriors3023 Ай бұрын

Hi . The membrane is called Uncoupling membrane from Schluter . That membrane is not suitable for floorboards. It is only for ply, OSB and chipboard. For floorboards you need to use this one or cement boards, or other tile backer boards , no membranes.

@spammail6734 4 күн бұрын

Sorry I'm late to this party, but for a bathroom application, would it be fine to paint a waterproof membrane over the self-leveling compound before laying the tiles?

@asifkhan5436 Ай бұрын

Great job

@valentinointeriors3023 Ай бұрын

Thank you

@martinnovacki8219 Ай бұрын

I am currently waiting for plumber to come and planning to have this built in waschmachine. Are there any special requirments for water supply and drainage behinde this built in wasching machine? I will definetly make sure he knows i will have that but what should i be carefull when checking if it is allright. How much space do I need behind? Thank you. Great video!

@valentinointeriors3023 Ай бұрын

Hi . Normally I don’t run anything behind the integrated washing machine . Usually there is no space to push the washing machine in if you have a socket or water outlet. This depends of the kitchen manufacturer. I always install the water outlet and the socket under the sink if is next to the washing machine. Otherwise behind one of unit that is next to the washing machine. Someone under the unit if there is no space behind. I hope this helps

@zoiatapliga9081 Ай бұрын

👍👍👍

@zoiatapliga9081 Ай бұрын

👍👍👍

@kronikphase Ай бұрын

Heatgun left the chat

@zoiatapliga9081 Ай бұрын

👍👍👍

@zoiatapliga9081 Ай бұрын

👍👍👍

@bftkdrichie5180 Ай бұрын

Professional work 👍🏾

@valentinointeriors3023 Ай бұрын

Thank you 🙏

@zoiatapliga9081 Ай бұрын

👍👍👍

@lukepowell4953 Ай бұрын

Great job, carpenter who specialises in doors, just about to fit my own kitchen and haven’t fitted a worktop in years and never a solid oak worktop, this video although not necessarily detailed had definitely helped! Thank you Did you oil the underside of the worktop with osmo? Twice in the same way you did the top?

@valentinointeriors3023 Ай бұрын

Hi . Thank you for your message. I did just one coat of oil underneath and vapour paper under the washing machine and dishwasher.

@zoiatapliga9081 Ай бұрын

👍👍👍

@lambert5112 Ай бұрын

Keep it up!

@yashswamy5833 Ай бұрын

Hi Sir, Do you work in London please let me know and please let me know your number?

@impamiizgraa Ай бұрын

Excellent video. I am concerned about my floors because they are so squeeky and wobbly. So I will screw down the floorboard before proceeding and use a hard backer board regardless. Question: what is the best levelling compound for this type of job, if price wasn't an issue for the client? The absolute best of the best?

@valentinointeriors3023 Ай бұрын

Hi . Levelling compound from Mapei and Ardex will do the job just fine . In my opinion the best levelling compound and adhesives are from Ball . Just remember you need a flexible one . Thank you

@Dawgley Ай бұрын

what grout color?

@valentinointeriors3023 Ай бұрын

Hi . I think it was praline but not 100% sure as it’s been a while .

@billysaunders544 Ай бұрын

First step, forget where you put your pencil ... got it

@gsoup7850 2 ай бұрын

Fantastic

@valentinointeriors3023 2 ай бұрын

Thanks

@daskog 2 ай бұрын

Love your videos and the straight to the point explanations! Can't wait to see the end result +1 sub. Cheers

@valentinointeriors3023 2 ай бұрын

Thank you 🙏

@lillianbernadine1522 2 ай бұрын

Excellent video. I have learnt so much!

@valentinointeriors3023 2 ай бұрын

Thank you 🙏

@zoiatapliga9081 2 ай бұрын

👍👍👍

@zoiatapliga9081 2 ай бұрын

👍👍👍

@zoiatapliga9081 2 ай бұрын

👍👍👍

@rak_fishing 2 ай бұрын

Hi, what fixing behind the washing machine front holds the door hinge plate? Ive tried a few fixings and cant seem to get a good fix

@valentinointeriors3023 2 ай бұрын

Hi . Normally the hinges and the hinge plate comes with the washing machine. If you don’t have this for any reason you will have to buy this online. There are different hinges so you need to look for one that is compatible with your washing machine.

@valentinointeriors3023 2 ай бұрын

And the hinge plate is secured with threaded screws into the washing machine. There is no need to drill any holes.

@LittleCutieABDL 2 ай бұрын

Very good video guys, im thinking of installing my own underfloor heating after experiencing for the fiest time in the epilepsy centre (weird thing to say but yeah) but yeah i didn't know the floor was heated and when i turned the thermostat up a bit as the room was cold i came in middle of the night to the bathroom and the floor was warm and then I i found out and now moving to my first home and in process of decorating it and everything and with such cold winters in the UK i want to invest in one for sure. Continue the great work

@valentinointeriors3023 2 ай бұрын

Thank you . There is a nice feeling when you have a heated floor .