8 ft apart?

I only watched a minute and a half to see what blade you used. There's another video somewhere on KZfaq that shows using a "trenching spade" to do a similar job for running wire. Such a spade is flat so it makes a hole straight down, and can be moved side to side to open that hole into a V shape. What I'm thinking is something between these two methods: Use the Sawzall to cut a single cut, then use a spade to move it side to side, avoiding the need to make a second cut or to lift sod. This could be the best of both worlds because the Sawzall could easily cut sod and roots that would be slow to penetrate with a trenching spade. Thanks for the idea.

How do you know when a person doesn't have rocks in their soil? They make a video about trenching with a sawzall.

Flies like yellow traps also.

genius.

We used that product or similar around the base of all our fruit trees. Always caught lots of bugs. Plenty more just landed on the tree. Looks like a better use for it.

They sure like my mirrors on my tractor they’re black I wondered why they went to that so now that makes sense 👍

Interesting thanks. Might have to do this with the tractor and mower !

Very helpful demonstration. Thank you.

How would this work for a wooded area with hard clay soil. Looing for a buried drain pipe. Hand trenching is becoming too difficult.

You know if you used that sawsall and do some ladder cutts that would come out in nice little squares???

Intellectual property theft. I should’ve patented it.

Yeah you stole my idea pal!

thanks so much for the tutorial. just picked up a 70 Monkey Ward with a tiller attached and need to remove the tiller and get it running. now i know how

Thank you for this fantastic tip, it saved me a lot of time and energy!

You mentioned rocks in your soil. This looks like a great idea if you have to deal with roots too. I wonder how long of a blade could be incorporated for a deeper ditch. 🤔

Uv laser level and invisible glasses? How in the hell is that so straight lmao. I was expecting some whacky hack job, holy shit that was good!

youtube recommends alot of stuff that helps me but I'm not doing this. not going to even try it. okay I might see if it works. nevermind I'm not going to waste anymore time than this comment.

stealing this thanks u rock

I tried that but it took all day, until I pulled the trigger on the saw.

Has anyone tried this in the slate belt in PA?

Can these be used for climbing roses

a pressure washer works also good job

Got that same dang quad (in better shape and that bitcx# runs like a champ!!) and the deer flies on our property have been HELL!!!! Thanks bud. Gonna give this a go, grab a beer and drive round our acres for a few. (which ought to give our distant neighbors yet another thing to laugh and say we're cray for!!)

If you're only running a line a few inches underground..you can use a edger tool to create the trench very quickly too. Generally speaking however, anything carrying a liquid should be placed below the frost line in your area. Unless of course it's going to be used for sprinklers or drip irrigation, in which case you would blow out those lines each fall anyway...or pump RV antifreeze into the system.

I used my Milwaukee Sawzall with a Diablo 9 inch hacksaw blade to cut through frozen ground to lay foundation.

Didn't look any faster than standing o On a shovel

Necessity is the mother of invention...Great idea!

Dogs are pretty impressed with your digging skills.

😊I've been trenching with my DeWalt for years. Also run the blade around my beds every year to cut the roots back. Water, dirt and mud have never hurt it. Just don't expect the blade to last long.

This is really smart, bro! You just saved me hundreds of dollars on equipment rent! Thank you!

Will this work just mounted somewhere or does it need to have the motion to attract ?

Your "trenching with a sawzall" video popped up in my feed (great video btw), which then lead me here. It's easy to edit a video to make it look like you're an expert that never makes a mistake. Posting a video where things don't turn out exactly as planned is much harder. Having watched this I learned some neat tricks I wouldn't have thought of, plus some things to avoid. Also, the video clips you insert are excellent!

You bought a trenching blade. Call a spade a spade and a trencher a trencher and a hoe a hoe

You look like Scotty Scheffler. Groovy video. Thank you

Trenching is dangerous on my property as you don't know what you may inadvertently cut! And that include s roots that may damage vegetation. If you do chance it spray it so you know where you cut!

im going to do this but i have to go down 2 feet

That’s a heavy gate for T-post mounting.Need a 4”+ wheel caster for grass.

Super idea! tHanks for the video

Can u list the measurements & Bill of materials please? Thanks!

Sir you need to add a cross board or from corner to corner to give it stability. You may also try attaching the C clamps to the PVC that way it will help with the rubbing between the PVC parts.

If YOU don’t have something NICE to say SAY NOTHING AT ALL !!! If it works for him, why r “You” complaining ?

A post hole hand digger works great to get the dirt out just a tip .

Weird they took the thumb-up away, yet leaving the thumb-down. Cool idea you got tho... and God's Son has returned btw

Paint the PVC to protect it from the UVs, last longer that way.

Strolling thru and you popped up on my feed. Great job. I see a lot of nay sayer comments, ignore those. Folks, he said it's not a gate for keeping in livestock. If we all repurposed what we have, just laying around, as he's done for the second time, we'd live in a less wasteful world. I repurpose everything on my homestead multiple times!

Thanks. Great demo.

Anything dumb for content

Thanks ...

Thank you. What is the purpose of the cardboard?