I’m seeing more and more problems with Lesu machines. Simple solution would be been for them to put thread lock at the factory
@RCconstructionJP2 күн бұрын
I agree
@SonuKumar-bs5xd2 күн бұрын
Price in india
@RCconstructionJP2 күн бұрын
311,239.00 Indian Rupees
@SonuKumar-bs5xd2 күн бұрын
@@RCconstructionJP very big price
@RCconstructionJP2 күн бұрын
@@SonuKumar-bs5xd yes, it wasn't cheap!
@artagain89775 күн бұрын
Very nice Jerome
@johnrutkowski900510 күн бұрын
How do you like the lesu vs the kabolite? Im looking at getting my first digger and I'm torn between the kabolite or spending another grand for a lesu kit
@RCconstructionJP10 күн бұрын
The Kabolite is a great machine and is completely different from the excavators with screw motors instead of hydraulics. It was very reliable and a lot of fun to use. I don't have anything bad to say about Kabolite. I wanted to try a more expensive machine so I chose the Lesu. It cost twice as much as the Kabolite. It's an incredible machine. The motions of the hydraulics are smooth and flawless. I guess the difference between the Kabolite and Lesu are the same as the difference between a Kia and a Lexus. You can drive both of them to your destination, but the Lexus is a more luxurious ride!
@RCGoProject10 күн бұрын
love it, where you get it? how to purchase the unit?
@RCconstructionJP10 күн бұрын
toucanhobby.com
@user-th8yl8uw9i12 күн бұрын
Give me 🎉
@Ken-p1f17 күн бұрын
Where is best place to get parts for Kabolite k963 parts . Are any parts store in USA? Thank you. Ken
@RCconstructionJP17 күн бұрын
There are no parts in the US unless you find someone selling them on Ebay.com. If you send a message to www.toucanhobby.com/ they will probably get you what you need.
@carltontweedle572420 күн бұрын
Was the filter dirty or blocked because, I work on the big stuff. Oil gets changed when it needs to be changed. As with the filters but we test the oil if it comes back fine back in.
@RCconstructionJP20 күн бұрын
The filter didn't look dirty. However, if it was it would be a major undertaking to remove it and clean it. The whole hydraulic assembly would have to come out.
@artagain897721 күн бұрын
Time and time again the Chinese retailers claim they have quality products and everything is tested constantly. Yet, he is another example of poor quality and building. Glued a speaker onto a fan??
@RCconstructionJP21 күн бұрын
I agree!
@Albert-cf9hx27 күн бұрын
Hey.. Can you show the quickcoupler and change to a nother bucket? Greetings
@RCconstructionJP26 күн бұрын
Currently I only have one bucket, but I have another one being delivered. I should have it and will make a video in a couple weeks when it arrives.
@Albert-cf9hx26 күн бұрын
@@RCconstructionJP thank you 🤝🏻
@RCconstructionJP8 күн бұрын
kzfaq.info/get/bejne/rN5jn9B41tWZYqM.html
@Albert-cf9hx8 күн бұрын
@@RCconstructionJP super nice and smooth Quickcoupling! Thank you for show🤝🏻👏🏻
@MicaseHD27 күн бұрын
What battery are you using? and how long is the run time?
@RCconstructionJP26 күн бұрын
3S battery, it's size is about 136*43*29mm (5.35" x 1.69" x 1.41"). They last 25 minutes. I purchased four extra ones from Amazon so I don't have to wait for them to charge. Also, with the charger that came with the machine the charge time is close to 9 hours. I use a different charger and the charge time is 70 minutes at a 5A rate. kzfaq.info/get/bejne/eJmWo6d63Z-ceIE.html
@Vito20ve27 күн бұрын
This is wild
@DVS53528 күн бұрын
It is, but too much play on the slewbearing.
@boreyrc82928 күн бұрын
Wow I like excavator how much brother ❤
@RCconstructionJP23 күн бұрын
$3,700 approximately
@boreyrc82923 күн бұрын
@@RCconstructionJP like this ❤️
@RCconstructionJP23 күн бұрын
@@boreyrc829 $3,700
@artagain897728 күн бұрын
You need a dump truck Jerome ;)
@RCconstructionJP28 күн бұрын
I had one from Huina. I sold it because I never really used it. I probably would use one if I have a very big area to play in.
@SavageX12528 күн бұрын
How has the machine been reliability wise? I want to buy one but keep hearing very mixed reviews some say do not buy some say I should have bought one yesterday. Opinion?
@RCconstructionJP28 күн бұрын
This has been a very reliable machine. I've had Huina and Double D Volvo excavators and they broke all the time. They also had much less power so I was always trying to modify them to dig better. The Kabolite K961 is very reliable. I've had it 9 months and it only had one or two minor issues.
@thd567829 күн бұрын
Thank you very much! That was what i was looking for!
@RRCCONSTRUCTIONMININGREC-tl8yf29 күн бұрын
They are awesome diggers big like my Friend.😊😊👍👍❤❤❤
@artagain897729 күн бұрын
Didn’t you recently get this Jerome? How many hours do you think you have on it?
@RCconstructionJP29 күн бұрын
I had 5 hours on it! I know a lot of oil tanks are dirty when they are manufactured and they don't get cleaned. I wanted to change the oil when I got it but the quick connect wasn't delivered until yesterday.
@RRCCONSTRUCTIONMININGREC-tl8yf29 күн бұрын
Very Nice new sub thanks for sharing my Friend.😊😊👍👍🚜🚛🚚🛻🚙🚧🚧🚧🚧
@artagain8977Ай бұрын
Thanks for sharing Jerome.
@whaylay1089Ай бұрын
I want one!
@DarkVoidIIIАй бұрын
It might be small but it sure beats digging and moving it all with a shovel! 😁👍
@artagain8977Ай бұрын
Just subscribed as well.
@artagain8977Ай бұрын
Congrats. I have the Lesu CAT 335 (ET 35). I think I’ve seen you commenting on some of the RC FB pages.
@mrcheeso8796Ай бұрын
how much does that excavator cost?
@RCconstructionJPАй бұрын
Approximately $3,600
@ahayy1748Ай бұрын
Price?
@RCconstructionJPАй бұрын
$3,700 approximately
@Joe85IBMORАй бұрын
Love this model nice to see it working
@thd5678Ай бұрын
Awesome model. Can you show it with the boom and bucket curled up? Like it is in the box but with the bucket curled (scooped) all the way. Thank you.
@RCconstructionJPАй бұрын
Yes I can
@RCconstructionJPАй бұрын
I uploaded a video kzfaq.info/get/bejne/hpxhdLODvbqyZ3k.html
@RCconstructionJP8 күн бұрын
kzfaq.info/get/bejne/rN5jn9B41tWZYqM.html
@will400rАй бұрын
I need this for the deck up at my cabin in the winter.
@CLAUDIOSRC9529Ай бұрын
@RcAjaeАй бұрын
멋진 장비네요.파워가 좋아보입니다.
@tony5247mittensАй бұрын
We're did you buy the metal syringe I need one to fill hyd tanks on my dozer and track hoe's
It's 1/10 scale that machine. Kaboilte never get there scale to actual scale mate 😂. It would tower over a Tamiya truck id never buy there crap
@bdalrzaqaАй бұрын
حفاره لعبة جميل تاخذ الراحه
@RussellHawkins-TRU2 ай бұрын
Hey JP my name is Russell and I have a kabolite K336GC and K966 I have been making the switch to lesu let me know if you are interested
@RCconstructionJP2 ай бұрын
Hey Russell. I have a Lesu SK500LC on order. It won't be here for another two months. I'll start posting videos when it arrives. I'm not looking to purchase anything else at this time.
@CharlesZweck2 ай бұрын
so is that scale you buy is 114
@CharlesZweck2 ай бұрын
isnt the 114 scale bigger than 118 scale
@CharlesZweck2 ай бұрын
not really sure 114 scale is one just asking questions to maybe figure it out
@RCconstructionJPАй бұрын
1:14 is bigger than 1:18. The 1:18 works better in the sandbox on my porch.
@CharlesZweck2 ай бұрын
so is that scale you run 114 scale i think that would be scale for me price that i seen for them isnt to bad price
@RCconstructionJP2 ай бұрын
Yes, I started with 1:14 scale Huina excavators. They are not as powerful, but they are less expensive for you to figure out if this is a hobby you want to stick with.
@CharlesZweck2 ай бұрын
what scale rc do you prefer in this type of rc
@RCconstructionJPАй бұрын
I like the 1:18 or 1:16 size of the Kabolite.
@CharlesZweck2 ай бұрын
what scale do you have in rc what scale are these
@RCconstructionJP2 ай бұрын
The most common is 1:14 scale. If you get bigger than that they start to weigh over 100 pounds. My excavator is 1:18 scale and the loader is 1:14 scale. They each weigh 20 pounds.
@hoverhead0472 ай бұрын
Think I would have put some grease back in that gearbox though.
@RCconstructionJP2 ай бұрын
You're right. I thought about that once I started digging again.
@Excavator7002 ай бұрын
Create
@Maikel15002 ай бұрын
Nice, looks like it best preforms on the sand. Cation with the salt water, the sand could also contain some still.
@bobosmith20462 ай бұрын
thank you now I know what to do have a great day
@janines43142 ай бұрын
Very nice
@DiggingDirtRC2 ай бұрын
Glad you’ve got it sorted out. The k963 is my favorite. Hydraulics suck, I work on them in real life. And they suck even worse at a 1/16 scale 😂
@Maikel15003 ай бұрын
Cool, I was curious how it looked inside. Thank you for sharing your experience and show us the solution.