The Woodgineer

Пікірлер

@sandeepmane1884 12 күн бұрын

Hey can we engrave 0.8 mm depth in brass with this machine with ease?

@Dan-ry7ql 16 күн бұрын

Hey mate soooo did the same with my i3 pro b with grbl.. would you mind if I ask you some questions 😅 you seem to be right on my same path of work haha besides ramps.. pissed that off lol...

@YouTube_Enjoyerlol 23 күн бұрын

Archeologists will find this and think it’s an ancient Celtic artifact 😂

@TesserId Ай бұрын

Non-standard fittings is a non-starter.

@agreatalternative Ай бұрын

I found this after just making my own walking stick (and video) for my dad, I really like your style, you got a new subscriber here 😁 What’s the reason for the abrasive paste? It’s not something I’ve heard about before.

@TheWoodgineer Ай бұрын

Awesome and thanks! Abrasive paste is my go to finishing sandpaper substitute now past 320 grit or so especially with odd shaped stuff. It gets into all the nooks and holes, doesn't generate saw dust in the air and also adds a bit of a finish oil (its got mineral oil and wax in it usually)

@agreatalternative Ай бұрын

@@TheWoodgineer Excellent thanks for the advice, I’ll definitely try that out 👍

@MrSinclairtv Ай бұрын

I use mine for only holding wood to be cut for the log burner. I went to local blacksmith and for £20 they made me larger metal holders and fitted them with non slip nuts n bolts. Works a treat.

@TheWoodgineer Ай бұрын

Brilliant. I've got the small log jaws Triton provide but could do with some bigger ones. I've since bolted down the unit to the floor since I did this video and it really makes a difference to stability.

@Richkill Ай бұрын

You showed the new battery where it has 3 thick notches. Your old charger has 4 thin notches. Does new and old batteries/tools/chargers work in all possible configurations? This can be pretty important considering worx does unofficially work in other brands.

@mrjohnnylongsleeves4128 Ай бұрын

The support arms on the side work well as a carrying handle when they’re folded up.

@TheWoodgineer Ай бұрын

I've used them for this though carefully as I worry they could slip out.

@JoeFrank-ro4wl Ай бұрын

I have not turned for several years. I am searching for a lathe here in Uganda that won't break the bank. I have also been looking at the different turning tools on the market. After watching your video I think I'll try the carbide trio. Thanks for the comparison you did. Expensive is not always best.

@TheWoodgineer Ай бұрын

Thanks for watching! I've since switched to easy wood tools but honestly, they are only a tiny bit better for the money I still recommend carbides like these to new/rusty turners.

@Mileikowsky 2 ай бұрын

Bros making the thingymajigger

@TheWoodgineer Ай бұрын

Vibrating Jenga block! :D I'll do a video on it soon™

@theygroup757 2 ай бұрын

How much more powerful is two battery version as opposed to the 1 battery version or is power the same just a longer run time..🤔

@TheWoodgineer Ай бұрын

Sorry I don't have the 2 battery version but the specs are here: uk.worx.com/leaf-vacuum-blowers-sub/

@user-pm5bp1np8l 2 ай бұрын

definitely worth watching

@TheWoodgineer Ай бұрын

Thanks :)

@ThetrollISBACK-hv7uv 2 ай бұрын

1:48 That sounds daring

@TheWoodgineer Ай бұрын

It was! I deserve a medal of bravery :D

@feistyfauna 2 ай бұрын

Can this perform a 45 degree bevel cut on a 2x8?

@TheWoodgineer Ай бұрын

Yes! Specs are here if you need them. www.bosch-professional.com/gb/en/products/gcm-18v-216-dc-0601B47000?srsltid=AfmBOorblEq1Nuy2cTDPgKzmLIWqKNYBOf1045TDnlsBmIIK7SHgD96x

@hastingb 3 ай бұрын

I've been putting off getting a Kreg pocket hole jig because I just hate all that plastic. I bought the Kreg Accu-Cut and it works okay but the sled for the saw is this flimsy plastic thing that I paid a lot of money for. I won't make that same mistake again with a pocket hole jig.

@TheWoodgineer 3 ай бұрын

Completely agree though I should say the Kreg is a good jig still, that plastic is fairly hard wearing. I'd never go back though after using this.

@creativepotato816 3 ай бұрын

This was awesome and too precious!! 😊I just purchased similar materials to build my daughter a sand table and this was very helpful! What a beautiful family, great sense of humor, loved everything about it!

@TheWoodgineer 3 ай бұрын

Thanks! :) Hope your table goes well!

@GetCart3rCA 3 ай бұрын

Great review! As soon as you hit "out of the blue 80's montage ..... -music starts-" I hit the subscribe button!

@TheWoodgineer 3 ай бұрын

Fantastic - these review videos can get pretty dull so any way I can keep things entertaining 😁

@hallthorhakonarson3223 3 ай бұрын

How do you activate the Bluetooth?

@TheWoodgineer 3 ай бұрын

You have to use their app. It is a bit fiddly but worth it to have better control over things.

@delzbeck 4 ай бұрын

I absolutely love this saw. I use it for SO many projects. Birdhouses to Planters and so much more. Love the clampdown or holddown bar. Works great. Love that I can cut up to an 8 inch wide board. I have been a Worx customer for probably more than 20 years. Ever since I got the 18 Volt string trimmer which still works albeit an adaptor and lithium battery now. I lost count of how many Worx products I have. I can also say I LOVE my 40 Volt 21" self-propelled mower, 40 V String trimmer and the Brush cutting attachment. Also the 40 V Leaf Jet, Awesome machine and all the drills, 18 gauge nailer, Switch Saw, Switch drill, stapler and so much more. Most of my stuff is old but still works well.

@TheWoodgineer Ай бұрын

Thanks for watching! I love it too and most of my gardening/DIY tools are Worx :)

@Ziplock9000 5 ай бұрын

Is this really only 13 LPM? That's 10x less than all other 24L compressors??

@TheWoodgineer 5 ай бұрын

Good spot. It is listed as 13 LPM on their documentation however I think this is a misprint and they meant 13CFM!

@mass.propaganda-5108 5 ай бұрын

Do u wear a mask if so what kind

@TheWoodgineer 5 ай бұрын

Not as often as I should! I use the stealth mask when I do. amzn.to/3TwmGIS

@adrianstaniec 5 ай бұрын

Loved the montage, only it was a tad short ;)

@TheWoodgineer 5 ай бұрын

Thanks! I would have gone on longer but there’s only so much awesome you can pack into a video before people start having seizures 😎

@fanchiuho1 6 ай бұрын

2:04 Hi I watched this video several times and wished I could press like every time! A question, what are the metric size and length of the grub screw? I would like to prep some on hand than to replace them later to save some time.

@TheWoodgineer 3 ай бұрын

Sorry for not getting back to you sooner. I'm not sure but I think it was an M3 grub screw, it should say in the instructions. I sold the machine a while back now as I've upgrade to a workbee.

@smarksruinedwrestling5020 6 ай бұрын

Word came out with their new compact impact driver wx265 looking forward to your review on it!

@joseluiss.rodriguez3652 6 ай бұрын

Buen trabajo amigó

@TheWoodgineer 5 ай бұрын

Thanks for watching :)

@hypersonic911 6 ай бұрын

That is not what i was expecting, i was just wondering if its safe to put your 3d printer on a wooden desk

@gbyl.avision7901 6 ай бұрын

😂😂😂😂

@TheWoodgineer Ай бұрын

Thanks for watching :)

@downunda107 7 ай бұрын

Brill. T You!I 🦘✌️

@toddfarnsworth236 7 ай бұрын

How would you attach an anti-static strap?

@TheWoodgineer Ай бұрын

Sorry for not getting back to you sooner - I'm not sure why you would want to but guess you could attach a strap to shaft part.

@Nalini_naveen 8 ай бұрын

Drilling machine link please

@TheWoodgineer Ай бұрын

This is a pretty good set amzn.to/3LCe9kk but check ebay for deals as they regularly come up!

@aldosandrin1958 8 ай бұрын

😂

@TheWoodgineer Ай бұрын

Thanks for watching :D

@sheripresloid7839 9 ай бұрын

I have so many Worx products! One I use everyday is the leaf blower. The snowblower is fantastic! Heck, I could go on and on, but this video makes me happy because I do have the Pegasus and if this fits on it, awesome! Thanks for reviewing and posting. Subscribed!

@TheWoodgineer Ай бұрын

Apologies for not replying sooner - many thanks for watching especially to another Worx fan :D

@GTO-HEXSniper1 9 ай бұрын

It is amazing and beautiful to watch keep up the good work sir!

@TheWoodgineer Ай бұрын

Apologies for not answering sooner but just to say thanks for watching :)

@anayazg 9 ай бұрын

Lmao great video

@Solgamer278 9 ай бұрын

How much 😊

@TheWoodgineer Ай бұрын

Sorry far behind with my replies! £21.99 from Amazon amzn.to/3WgDCVe or from the US site I think my discount code still works: www.stealthmask.com/discount/woodgineer5

@nickrudd2568 9 ай бұрын

I think sander sealer and a wipe over with wire wool before the print.

@TheWoodgineer Ай бұрын

Sorry very far behind with my comments - I want to do this experiment again at some point so will give that a try!

@ismaiel.alfroui 10 ай бұрын

هل تعمل بطارية توتال ٢٠ فولت على هذا المنتج

@TheWoodgineer Ай бұрын

Sorry very far behind in my comments - yes they are 20V :)

@DubiousEngineering 10 ай бұрын

Such a lovely produced video and so honest... bloody hard work being a KZfaq creator! ... maybe time for a beer and Skype one day soon :-)

@TheWoodgineer 10 ай бұрын

Why thank you 😀 and totally up for that 🍺

@mickythreee4640 10 ай бұрын

Great review. I bought one after this. Why is a face clamp a must in with this? I have seen kreg have a clamp that slots in the pocket hole. That would be handy, I might get one of them. But I don't know why I would want a face clamp and I am wondering why? Can you help kind sir?

@greetgoods 11 ай бұрын

Was trying to find how to carve a rock like that, thank yoU!!

@DUIofPhysics 11 ай бұрын

that moment when the wood slips and you're making Salami

@AbhijeetSingh-ld7sb 11 ай бұрын

Bro what is the name of tool you are using for crafting please reply

@MetaphorForests 11 ай бұрын

This saw was so out of square with no way to calibrate it properly. So everything you cut is not going to look good unless you have his jig

@TheWoodgineer 11 ай бұрын

Its perfect for those rough cuts but yes, definitely not fine joinery.

@Solemn_Kaizoku 11 ай бұрын

Cool. May I ask why you don't carve wet?

@TheWoodgineer 11 ай бұрын

I normally do, that was just a quick carve for reviewing the maker X. All that horrible dust, you should always carve wet where possible!

@malcolmbacon7892 11 ай бұрын

Thank you very much for this informative video and honest review , will be looking at Banggood's other tools as well

@markjarman7819 Жыл бұрын

Great review indeed. Only thing I will say for me the music in the background was teeth grinding.

@TheWoodgineer 11 ай бұрын

Out of curiosity, the music choice or volume?

@markjarman7819 6 ай бұрын

@@TheWoodgineerI both really. I would much rather focus on what you are saying to be honest. Great video and review though 👍

@TheWoodgineer 6 ай бұрын

@@markjarman7819 thanks for the feedback :)

@wayneguy6043 Жыл бұрын

Do a nail clipper review?

@thenewfiewolf3925 Жыл бұрын

hey I have this cnc machine which came with the router and laser. was wonder if anyone knew what the wavelength of the laser that came with it is, hard to find info and need it so I can buy I pair of laser safety goggles

@TheWoodgineer 11 ай бұрын

Sorry I don't :(

@LickorishAllsorts Жыл бұрын

Love the plywood.

@TheWoodgineer 11 ай бұрын

It's lovely isn't it? Marine ply I believe.

Ең жақсы KZfaq

Пікірлер