Thanks Joe, working on ours this weekend!

Did the crawler ever get built?

Would be best if you can share where did you get that circular plate from? Thanks.

I used Dawn Powerwash and Dawn dishwashing on my K and N filter. Just use a soft brush to scrub and rinse until the water is clear. Let dry and reinstall. I have the dry filter. No oil. Might take 2 washes, but it worked for me.

Good tip. Living in the middle of nowhere and pre-internet days, I cleaned mine by soaking it in warm water with dish-washing liquid in solution. After drying slowly in a hot press / airing cupboard over the next couple of days I sprayed it with my own diy filter oil brew. The brew is simple - half and half ATF and chainsaw oil, with enough kerosene added to make it sprayable from a hand-sprayer. Let it sit for a few hours and re-fit. Never had the slightest trouble from doing it this way and from the amount of crap it catches, I'd say it's working well.

Thank you so much!! I just bought an RV and the wall sconces are the worst. Can’t wait to do this this weekend!

i cleaned mine inside out,poured oil into a small clear eyes bottle and did the same.just less oil,dont want to trigger the amf.

I just built a bike and put a pod filter on it. This will be a street cruiser, no dirt. Do I need to oil the filter anyway?

That right there is awesome

Parts store had cleaner but no KN oil, I searched internet for too long looking for a handy substitute. Thanks for this oiling tip - so many YT vids that get top listed (controlled by YT/Google) with misleading titles simply to get us to buy their sponsor’s crap. Thanks again!! PS - People are leaving YT Google in droves (of course Google won’t admit it), tired of having their searches passed through multiple filters.

lol,,,, kool vid bro.

This is a great series. Wish you had linked to all 3 in the description. The algorithm didn't link them in the suggestions. Part 1. kzfaq.info/get/bejne/ebN3jMujzMvQZZ8.htmlsi=wS9bkcUrkUXhlJgk Part 2. kzfaq.info/get/bejne/fd6neNeiscDMmWw.htmlsi=7mlE-IURCjARNcYY Part 3. kzfaq.info/get/bejne/meCBf7l-mrHagqc.htmlsi=nNsE2gEvTfDpJmCl

This is a great series. Wish you had linked to all 3 in the description. The algorithm didn't link them in the suggestions. Part 1. kzfaq.info/get/bejne/ebN3jMujzMvQZZ8.htmlsi=wS9bkcUrkUXhlJgk Part 2. kzfaq.info/get/bejne/fd6neNeiscDMmWw.htmlsi=7mlE-IURCjARNcYY Part 3. kzfaq.info/get/bejne/meCBf7l-mrHagqc.htmlsi=nNsE2gEvTfDpJmCl

This is a great series. Wish you had linked to all 3 in the description. The algorithm didn't link them in the suggestions. Part 1. kzfaq.info/get/bejne/ebN3jMujzMvQZZ8.htmlsi=wS9bkcUrkUXhlJgk Part 2. kzfaq.info/get/bejne/fd6neNeiscDMmWw.htmlsi=7mlE-IURCjARNcYY Part 3. kzfaq.info/get/bejne/meCBf7l-mrHagqc.htmlsi=nNsE2gEvTfDpJmCl

This will be the second vehicle and replacing back to filter.

Take your cheap ass to the auto parts store and get a recharge kit! If you can buy a $69 filter, you can afford a $20 recharge kit every 20K miles! Da phuc

The only vehicles I have. 86 pickup and 88 4Runner. Love em

...cleaned it with WHAT? what is the cleaning solution?

Good video sir. We produce LEDS for cars. And we would like to invite you to do a review video for our product. Is there a way to reach out to you?

Take a chance ruining your multi-thousand dollar engine by saving $17 for a professional K&N cleaning kit. WOW. What kind of logic is that?

Ohhhhh my gosh, I didn’t know this was possible! THANK YOU for this video Joe! Seriously, thanks!!!

This is a great video, Joe! We moved into a house with very poor lighting in the garage with just one bare light bulb. I will be doing this project shortly to add the fixtures like you did. Thank you, Joe!

What kind of filter are you cleaning? I wouldn't want transmission fluid on my air filter.

Those 22r rev squeals ! Looks good, works good

I'm interested! Thanks for talking me through it. KZfaq and other resources are awesome that a person can look up and figure out if they are able to do something or hire it out! Now I will have adequate lighting in my basement!

Why would any one love this truck.

to those who are bitching about using ATF and it costing you more in the long term. in 1978 i was a mechanic at an Oldsmobile dealership (Balch Oldsmobile, little rock arkansas) i had a car come in with what sounded like a lifter ticking (455 rocket) and the head mechanic had me take it to the back lot, and pour 1 quart of ATF in the gas tank and another down the CARBURETOR WHILE HOLDING THE THROTTLE OPEN AND ENGINE RUNNING! the tick was carbon on the valve, the trans fluid burned it off, and one hell of a white smoke cloud hovered over the back lot. the most damage it could possibly do is mess with any sensors between the air filter and the combustion chambers!!! by the way, im a 65 year old man that is married to "steffy" in 1978 i was driving a 68 Chevelle SS396. i built the engine with the help of an old mechanic down the road from me. 4 bolt main high deck truck block, triple sprung square port heads that were milled and cc'd, accel mechanical advance dual point distributor, 12.5:1 trw pistons, hyplon custom speed wires, cool can, open headers, n50-15's on keystone mags, amaco super premium gas (105 octane) (1/2 tank only) with a pint of "missile mist"( model rocket fuel) per 1/2 tank and a touch of tetra ethyl lead. m21 rock crusher and hurst shifter, and custom built 11 inch clutch (douglas zahn owned arkansas brake a clutch). holly carb and edelbrock torquer high rise intake with spacer and number 500 brass mesh screen between spacer and intake. so im not some kid in my moms basement or some 17 year old that drives a 2023 mustang/camero his folks bought him his senior year of high school! lots of those go to high school 2 blocks from where i live

bro this was super helpful thanks so much !

chiclet remover lmao

Can you send me the part number lowes cover

I washed mine with gas. The gas went black in about 2 seconds of it submerging in, hit it with the air compressor and then I wet the filter with some 2 cycle oil. Worked fine

I like the strap trick.

Less talky more wheelin. Deep down you know this...

How many AMP does the outlet have to be in order to do this ? Or does that not matter, not much of an electrician but have a job where I have to do this exactly. So this helped me out a lot just need to know if the amps matter for the outlet

allways ck for power even though the wall switch is of. a miss wired switch can cause power to be allways on when the switch is commanding the common white wire. ask me how i know!! 😮

Thanks buddy

I know this video is from 2 years ago but just in case you didn't think of it... you may want to air down some more next time. 🤣 Enjoyed the video thanks for sharing and I subbed ya. 🤘

I have a single case with 4.7 gears and 35in tires with 4.88's is the 4.7's too low for the snow wheeling

the pizza made me hungry 😮

🚙🔝💯🚙🔝💯🏔️🚙🚙🚙🚙 kzfaq.info/get/bejne/hcBjhKZ6r9fNYGw.html Spain

Preach it man! I started following during the KOH trip and I love what you're doing. Keep it up sir. 🍻

Please look further than this video, don't cowboy it like this. Getting shocked while standing on a ladder may well take your life.

How is the tire doing? Did you replace the tire or does it still have the plug in it?

Im here just for you personally you are very interesting for whatever reason 😂

For a minute there (well, ten minutes to be exact) I thought I was going to see my first ever KZfaq video on a guy actually 'changing' his tire/wheel using a Hilift jack as a lifting device. Your's came the closest yet! Thanks anyway. Hey, mine might actually be the first, when the jack finally gets here?

Does this work on the red reusable filters

Nice to see some more yota content man 👌🏼 helps motivate me mess with the pile of rust ha

Как правильно называется по каталогу разъединитель заднего моста (раздаточной коробки) спасибо.

T’is but a scratch!

But what if the wire is torn from the socket and I don't know how to re-attach it?