2 ай бұрын
9 ай бұрын
9 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@tyharrell1658 2 күн бұрын
Thank you so much, I did not understand how the fitting worked into the master and what part I would need - I am so appreciative that you demonstrated that for us that are fumbling our way through restorations and upgrades.
@jembuildz 2 күн бұрын
@@tyharrell1658 I’m glad it helped and trust me. I know the feeling of fumbling through a project but stick with it. You’ll get there.
@charlesphilippou2619 3 күн бұрын
Hey great video! I'm looking for a factory muffler/tailpipe assembly like the one you removed from your IROC. I see that you have Illinois plate. How close to the Chicago area are you? Thanks, Charlie.
@vandettabuilds6641 Ай бұрын
I built my exhaust. Hedman mid length headers 3" to a 4" collector Single 4" all the way out the back.
@jembuildz Ай бұрын
I wish I had just done my exhausts y pipe from the start.
@vandettabuilds6641 Ай бұрын
I'm riding in my 92 Camaro LS 6 liter AR 5 from a GMC Canyon
@jembuildz Ай бұрын
I’ve put about 100 miles on mine since I did the swap and I’m very happy with it.
@davebarron5939 Ай бұрын
Ever since I completed my LS swap, frankly I don't think I could drive a OEM 3rd gen again, beautiful car though.
@jembuildz Ай бұрын
It’s such a night and day difference. I would be lying if I said I haven’t been thinking about a full engine, trans and rear end swap from a 98-02 into my 89.
@shyfilipinangrumpyveterandude 2 ай бұрын
Beautiful 🥰
@𝐁𝐫𝐚𝐦𝐛𝐥𝐞𝐛𝐞𝐫𝐫𝐲𝐭𝐫𝐞𝐞 2 ай бұрын
Aww (first
@Cole2OO5 2 ай бұрын
Wait..WAIT-
@Kosworth 2 ай бұрын
That's when you bust out the big drone and fly it up there to say hi.
@ericankney5957 2 ай бұрын
Might be stuck, you should see if he needs a tow or something.....
@benitomachado8084 2 ай бұрын
I love this song
@Southwest7116 2 ай бұрын
THATS THE LITTLE BIRD THAT TOOK OFF FROM NAPA AIRPORT I SAW IT!
@davidrouse7052 2 ай бұрын
LOOK MA,A GHETTO BIRD!
@travisgessler6283 2 ай бұрын
Perfect RPG opportunity
@jembuildz 2 ай бұрын
😂
@dereksevers9187 2 ай бұрын
I got a buddy that works for Bell I wonder if he does the same thing with his little bird or is he likes to call it the Loach?
@MetaVizions 2 ай бұрын
I really wanna see an updated quadrocopter variant of the lil bird
@N.C.S.W.I.C 2 ай бұрын
"Honey. Grab my M82."
@davidbright1489 2 ай бұрын
Not really doing anything different than anyone else out there…..
@jembuildz 2 ай бұрын
I agree, I was just hoping to help anyone with questions on how to set it up get started in the right direction.
@davidbright1489 2 ай бұрын
@@jembuildz gotcha. On a side note how much power you making? I’m going LS on my 3rd gen and wanna run the factory z28 air box. Hoping it will support 500hp
@jembuildz 2 ай бұрын
@@davidbright1489 that’s awesome! I think you’re gonna love the way your 3rd gen feels with LS power in it. I haven’t dynod my car yet, but I’m realistically thinking I have 350 rwhp. I think your airbox should support it.
@jasonlill2020 2 ай бұрын
I’d be monitoring how much oil you get at that intake AN fitting. The rocker cover normally vents back up that hose towards the intake coming off high revs. Most people have a catch can in that line, and usually a breather instead of the intake connection.
@jembuildz 2 ай бұрын
@@jasonlill2020 I’ve actually switched the line from the catch can since I did this video. The catch can line now runs to the 3/8 input on the sniper and the brake booster line runs to the 3/8 input on the intake.
@JMD83 2 ай бұрын
Looks like a very well thought out and executed plan. Good luck with the build and enjoy!
@jembuildz 2 ай бұрын
Thank you and thanks for watching! I just wrapped up the exhaust yesterday and will get another video out soon.
@beerwrenchgarage 2 ай бұрын
Hey! Great video and good work! That 89 looks and sounds PHENOMENAL! I dont know how your channel hasnt exploded yet - but keep up the good work, it'll come!
@jembuildz 2 ай бұрын
Thank you! I appreciate it.
@irockz2819 2 ай бұрын
Thanks for the info, Bud. You wouldn't happen to know the part number on the braided holes nine.
@jembuildz 2 ай бұрын
I’ll have to look thru my receipts, if I find it I’ll let you know.
@user17213_q 2 ай бұрын
Awesome ❤
@user17213_q 3 ай бұрын
Lol
@user17213_q 3 ай бұрын
Oml dad
@user17213_q 3 ай бұрын
Lol your funny!❤
@zaneseligman1313 3 ай бұрын
I have to wonder why this was made into a video. Are you normally not able to fix anything? I’m not sure I would post about it, but I guess if you’re that proud of yourself congratulations …. I guess..idk…
@sageminentjunky5197 3 ай бұрын
Your almost as bad as me
@steggc85 3 ай бұрын
Do what I do. Twisted wire.
@xmradio11 3 ай бұрын
Spring clampation devices are better.
@Xedilian 3 ай бұрын
A cable tie would also work.
@tonyz6421 3 ай бұрын
Awesome 👍🏼👍🏼
@kittykat67891 3 ай бұрын
Hope you were going to get ziptie
@augustparent7775 3 ай бұрын
And he remembers where it’s at cause NO ONE TOUCHED IT OR MOVED IT
@cloroxlavenderscent4307 3 ай бұрын
Its like me fixing my brakes by putting nails in the holes in the abs pump. Now at least i have front brakes.
@jembuildz 3 ай бұрын
ABS takes all the fun out of driving lol
@tomkoval490 3 ай бұрын
Zip ties lol
@jembuildz 3 ай бұрын
To the rescue every time!
@BenMccloud-kz6lk 3 ай бұрын
Doesn't look like the clamp was sitting around very ling i like authenticity in my memes😤
@BenMccloud-kz6lk 3 ай бұрын
Looks new
@jembuildz 3 ай бұрын
It is, but it came with an install kit that I never used but threw it in my bin of parts that have new and used parts 😃
@BenMccloud-kz6lk 3 ай бұрын
@JEMBuilt I'm just busting your balls don't take me seriously liked the video keep up the great work
@ph4tb0ijean 3 ай бұрын
make it into a kit and ill buy one!!! all i have is a t5 and been looking for alternatives. Awesome build!!!
@jembuildz 3 ай бұрын
That’s something I’ve actually been thinking about.
@kurrentevent 27 күн бұрын
Can't wait for you to make the kit then man!@jembuildz
@TJsCustoms 3 ай бұрын
100th sub! And thank you for the info. I’m doing an LS swap with cd009 trans. And needed to convert the clutch system like this. You’re the man!
@jembuildz 3 ай бұрын
Thanks for subbing! 100th sub too…that’s awesome. I’ve been slacking on the videos but that doesn’t mean I haven’t been busy on the car. I’m hoping to get and update out soon.
@bernardwarr4187 4 ай бұрын
Hi. When it was all installed, did you look through the viewing inspection opening and see the whole bearing and hose’s moves towards the clutch, only the small sleeves stayed still? Greetings from the UK 🇬🇧
@jembuildz 4 ай бұрын
Yes, I have a bore scope camera I bought off Amazon and was able to have my son operate the clutch pedal while I viewed the internals move.
@bernardwarr4187 4 ай бұрын
@@jembuildz I was surprised to see the pipe housing fitting moving too? Obviously you need flexible lines with this design
@carllattimore8227 5 ай бұрын
BEST VIDEO on this. GOT the key point right away!
@MS-bx7ow 5 ай бұрын
2:50 that spacer you pointed out, how long is it? Wondering what the spacing is inside the bracket
@Zack18153 6 ай бұрын
Part number for master cylinder fitting?
@jembuildz 6 ай бұрын
It’s Earl’s 425LS641001ERL
@markwilhelm168 7 ай бұрын
What is the recommended clearance 1/16" or .016"? You kept saying 1/16 but the feeler gauge you used was .016. 1/16 is .0625". That puts you much tighter (.047) than recommended. If there is expansion when it heats up, the fingers could touch enough to wear out the throughout bearing.
@jembuildz 6 ай бұрын
I double checked the instructions from Howe Racing and it is 1/16 (.06) +/- 1/32 (.03). If I did use the wrong gauge I must have got lucky cuz it shifts and work’s beautifully lol. Thanks for watching!