why would you need both? doesnt an impact driver also drill regular holes?
@ferniea9225 күн бұрын
Interesting, thx for video
@MrMjrob2 ай бұрын
The 4 amp hour battery for this is great because it adds extra uggas duggas with not much weight gain and it gives you a flat battery to stand the tool upright. I love this tool. I might have to get the brushless drill and impact when my Craftsmen tools play out.
@emmcee4762 ай бұрын
You still have it?
@johnnyray342 ай бұрын
I have the standard one and it's been a great asset to my toolbox.
@ksavage6813 ай бұрын
I got the 20v 1/2 inch impact. it rocks.
@AJ-ds9xq3 ай бұрын
Did they take it back? Or did you fix it? I am thinking about getting one today. Do you still recommend this one? Thanks!
@raypalermo16033 ай бұрын
Maybe toyota uses cheap bolts.
@emmcee4762 ай бұрын
🤦
@1ohmwrecker4 ай бұрын
If I remember correctly, the standard ratchet is rated up to 100ft lbs. That's manually using it of course.
@1ohmwrecker4 ай бұрын
I've had the impact for about a year. I've had the ratchet for 2 years almost. The only gripe I have is the impact. It's got a slight delay after I push the button. Idk why, it's just annoying lol. But I love these tools! So small and convenient!
@davntelisha194 ай бұрын
They have a battery now for the Hyper tough tools now 4 hour battery
@aeropg5 ай бұрын
did you buy it only for make an video ,why spend a lot of money if you have a milwaky,dewalt ,bosch then only because you want money from youtube.i now people with that kind of tool and perform very well sorry
@cebuanostud6 ай бұрын
Hype budget maybe, but definitely no Hyper trash. 😁😁😁
@DIYVariety7 ай бұрын
Hey bud i bought one today was wondering if you still using it
@P.Trim697 ай бұрын
Thinking about taking my 1.5 ah and combining them making 3.0ah looks like be kind easy be longer out bottom.
@P.Trim697 ай бұрын
Got the regular size one. Got fast charger,4 ah battery. Bought the drill because it was 21$ with few bits and 1.5 ah battery and charger. Got it because wanted extra battery the 2.0 ah battery was 18$ so for few more dollars got drill and charger to boot.
@hectorvargas48147 ай бұрын
Thanks for reviewing
@zBMatt7 ай бұрын
Got lug nuts off and you didn’t even use the 2ah or 4ah battery.
@ethangonzales4427 ай бұрын
This tool was meant for knuckle busting jobs it makes the job a lot easier and less painful
@shawnhorne92968 ай бұрын
Too much talking, get to it people loose concentration, just get to it
@dats197life58 ай бұрын
Tighten it
@shawnhorne92968 ай бұрын
@@dats197life5 shut it
@ProblemChild-xk7ix8 ай бұрын
You can buy the Skil 12 volt for the same money when on sale. Much better quality, much better batteries and a real rapid charger.
@travisclarkin42778 ай бұрын
Does this Chinese junk come with a side of beef and broccori ???
@emmcee4762 ай бұрын
You sound like the type of person who buys Strap On only because of your inflated ego
@JJJobson8 ай бұрын
I’m sure they will be just fine. People be acting like they supposed to break bolts off. Break it manually and spin it off
@fabioarrua8 ай бұрын
i also have a compact cheapo 12 ratchet in 3/8 ...what a marvelous tool .
@toddh62348 ай бұрын
Impact driver on lug nuts? Impressive to see that it had enough breakaway torque to get it done. Doing that repeatedly over time will most likely cause it fail. Driver are mostly used for driving in screws & tightening small fasteners. Why not get the impact wrench that they offer in that product line.
@MindOverMetalTV8 ай бұрын
It was just a test to show it can compete with name brands. The wrench wasn't available at the time.
@iceeey76848 ай бұрын
This impact isnt meant for lugs! This one is for fasteners (lagbolts, etc) they have one jusy like it with a more powerful motor with a 1/2 for sockets that works way better. I have all kinds of hyper tough tools and they all work great
@jafinch788 ай бұрын
Thanks for sharing. Interesting finding the details between the two out. Appears the Hyper Tough you have in the video is the newer style. I picked up an extended ratchet and looks like there is a older style of the Hyper Tough battery that does not mock the Craftsman battery pack more, though the height is the same as the Craftsman NEXTEC. With the new Hyper Tough tools, the Craftsman style pack will not fit all the way in. Thinking can 3D print an adapter with some sort of way to pull the adapter out, which I guess can be extruded plastic made as well. These Power Torque lithium ion battery might work with the NEXTEC tools as well I'm thinking. Interesting finding and glad KZfaq just recently suggested.
@jafinch788 ай бұрын
Guessing you saw ww123 channel video titled Hyper Tough / Craftsman Nextec. Here is what I observed in a crummy video regarding the Nextec and Hyper Tough batteries so you know if you didnt already. kzfaq.info/get/bejne/qLN_krp0yLPdlp8.html.
@2078smith8 ай бұрын
It could be a good idea with the battery. Both batteries can be 4amps, but the oriellys battery, can be designed to run longer & designed to give the tool more power than the hypertough battery.
@eldjmasterfreddy43669 ай бұрын
I love hyper tough the are great tools and don't break your wallet.
@alcerz9849 ай бұрын
Taking into consideration that all these electric ratchets come from China including milwaukee it might be a good ratchet.
@MindOverMetalTV9 ай бұрын
Yeah no kidding. That's how I'm looking at it.
@scottyfett67509 ай бұрын
the long one can do short work but short cant do long work so i opt for the long one instead. i dont think anyone should get both. anyway i dont even think the milwaukee can break the fasteners or nuts that well either. what i look for in a next one is if they can make it more thin both body and shaft. that would be great!
@Brysonandmason3209 ай бұрын
Also something to take not of the reason it doesn't work on those other tools is because their brushless and yes they do use those extra contacts on the battery it helps with power draw, but now Hyper tough has out their own 4 amp battery, and a few new tools hope to see you review the other tools
@Brysonandmason3209 ай бұрын
I was the one that left the comment im sorry that it was very vague it doesn work but with mods
@Conqueef-tadoor9 ай бұрын
Why bother? Hyper Tough now sells a 4ah battery, and it's only 25 bucks. So it's actually cheaper than O-Reillys, plus you don't even have to modify anything. 🤷🏻♂️
@jafinch788 ай бұрын
Good eye, thanks for sharing. Glad I read this. Doesn't look like is out locally, though can be ordered online.
@P.Trim697 ай бұрын
@@jafinch78I got one 24$
@markgreen66459 ай бұрын
I took needlenose pliers stick it in the end of the tool and pride the two little black plastic tabs off much better than having to drill into the batteries
@mn4a159 ай бұрын
They now have a four amp battery
@wIzKid161009 ай бұрын
They make a 4 amp now and a 3/8 impact wrench
@airitoutrc32529 ай бұрын
The 3/8 is grate pared up with the 4.0 batt it’ll take lugs off my boat trailer no problem at all
@gerardoramirez25179 ай бұрын
Just saw a 4ah battery at Walmart yo
@airingtonjesse66919 ай бұрын
power tough makes a 12v 4amp battery now good hack tho
@ramonroman773910 ай бұрын
Or you can take the top off one of the hyper tough batteries 🔋 because it has them plastic tabs on the battery or you can splice an adapter plug 🔌 on the end of the hyper tough charger
@jesusstuart3910 ай бұрын
On the Walmart website hyper tough came out with 4ah battery looks just like the power torque and other 12v tools
@MindOverMetalTV10 ай бұрын
I saw that, but they've been sold out every time I've checked.
@jesusstuart3910 ай бұрын
I can't wait I love these 12v tools
@theindooroutdoorsman10 ай бұрын
I grabbed one in the store today and the box said 3,200 inch pounds. Ain't no damn way a 12 volt is pushing 266 foot pounds.
@ws48359 ай бұрын
That’s the 3/8 inch impact wrench. Might have different internals than this which is a 1/4 inch impact driver.
@theindooroutdoorsman9 ай бұрын
@@ws4835 It was not the 3/8ths impact wrench.
@ws48359 ай бұрын
@@theindooroutdoorsman I’m looking at my box and it says 1380 inch pounds for this tool. Not sure where you saw 3200 inch pounds.
@ws48359 ай бұрын
@@theindooroutdoorsman the 3/8 impact wrench says it does 280ft lbs which is definitely not likely to be accurate.
@theindooroutdoorsman9 ай бұрын
@@ws4835 I saw it on the box in the tool aisle at the Wal-Mart by my house.
@randy92782110 ай бұрын
Just actively breaking bolts with zero care 😂 love it 😁 I didn't even know hyper tough made these. Nice
@MindOverMetalTV10 ай бұрын
Man it hurts to break them. Just can't show it on camera 😰
@siskiyouwoodsmann427910 ай бұрын
Good information, thanks. Those are cheap enough to throw one in each vehicle just for flats. Think I’d have a breaker bar too just to break them loose.
@Lyle-199910 ай бұрын
Issue with brushless items is the lack of chip/computer communication.
@MindOverMetalTV10 ай бұрын
I opened the battery after I made this video and that does appear to be the case.
@datphan421811 ай бұрын
Very helpful information, thank you
@Bouldergoat11 ай бұрын
Thank you for this information! Love my hyper tough ratchet so this will be a nice addition. Could you maybe test to see if it gives the ratchet more power, along with the longer run time that comes with the 4ah?
@MindOverMetalTV11 ай бұрын
Good idea
@Bouldergoat10 ай бұрын
@@MindOverMetalTV just tried buying one and it seems like they are out nation wide. Maybe discontinuing them?
@MindOverMetalTV10 ай бұрын
@@Bouldergoat I was able to add it to cart. It's actually on sale right now. Try this: www.oreillyauto.com/detail/c/power-torque-tools/power-torque-lithium-ion-battery/ptt1/ptt0010?q=Power+torque+4ah&pos=10
@Bouldergoat10 ай бұрын
@@MindOverMetalTV yeah, it let me add to cart and buy the battery and charger, then it just canceled the battery and shipped the charger and refunded me the battery.
@MindOverMetalTV10 ай бұрын
@@Bouldergoat Ah too bad.
@MindOverMetalTV11 ай бұрын
Buy Power Torque 4ah battery here: www.oreillyauto.com/detail/c/power-torque-tools/power-torque-lithium-ion-battery/ptt1/ptt0010?q=Power+torque&pos=7
@Bouldergoat11 ай бұрын
I had this problem. The original 1.5 ah worked fine but all the new 2ah I tried at the store wouldn’t latch. Then I looked at the 2 battery tabs and saw they weren’t bent out as far. I very carefully warmed the base of the tabs and bent them out a bit. Latches fine now.
@MindOverMetalTV11 ай бұрын
I'll try that if walmart won't warranty it.
@mrcokez111 ай бұрын
$90 for all of that? pretty damn good. Milwaukee is great but damn are they expensive.
@ertren611 ай бұрын
Yeah but Milwaukee is a proved name and the tools stand up to serious abuse.