Yeah I was lucky enough to get it for way lower than the normal cost.

Cloud is something different

I can’t remember. I thought I could. I haven’t played it in a while.

Yeah I like them. I’ve put them in two builds so far and I’m looking to replace my main pc with them.

@@RYNOTECH I just got done replacing my fans in my main PC as well. I previously had 12 iCUE QL120 RGB 120mm, and at the time I spent around $550 to get 12 of them in my NV7 case. I don't like spending more on fans than my CPU or AIO, it bugs me quite a bit. My son has a Lian Li Dynamic XL, and I installed 9 (AsiaHorse Cosmiq fans) of them in his case and they are running so nicely. The AsiaHorse fans move so much air, and it keeps his system unbelievable cool. I just installed 7 intake Asiahorse fans & 5 exhaust Asiahorse fans in my rig. I can't believe these fans aren't getting talked about more than they are. I almost bit the bullet and bought 12 Lian Li Infinity fans, but I don't want to spend $350 on fans.

Haven’t had any issues

I like them. I’ve put them in two builds so far. Let me know how it goes. They also have them in reverse too

Been using them for years. I just bought a new pair. Two weeks ago. Unfortunately there not dog proof

Honestly I made this video way before ddr5 was even on people’s minds. I can’t tell you yes for sure. I wish I could but that wouldn’t be fair if I did. I refuse to mislead anyone on purpose.

lol unfortunately no.

You can daisy chain them. There’s only three connectors. The last build I did a couple weeks ago we use 9 fans and only uses one header on the board

Also they have reverse fans too.

@@RYNOTECH Okay awesome thanks

@@RYNOTECH I saw that. That's one of the few things I don't like about cases like the O11 Evo or NZXT H9 Flow like what I have is most of your fans you see from the back. I was going to get Lian Li fans, but it would be over $350 here in Canada. I just ordered the Cosmiq ones and they came to about $150

@@spentcasing3990 right I would rather get these and put the savings into better hardware than $350 in fans. I’ve never used expensive fans. Never understood it. Some try to show the “performance increase” with high end fans and I real world scenarios you never see a difference. Did you see the reverse fans? And did you get 3 of them. They didn’t have them when I bought these but I’m going to get 6 of the regular and 3 of the reverse ones for my main pc. I’m looking at different cases right now. I have a new aio with video display for cpu and gpu temps. I’m looking to upgrade the cpu from 3900x to a 5950x. They were $350 at micro center. Still running a 2080ti but it’s still a good card.

It was a nice build.

It cost me $1600 in 2020. That video is kinda old man. Like made in 2020

I'm only joking with ya buddy. I can see it's not a cheap card. You have alot of patience. I would of took a hammer to that mount by now. I paid £70 for 1 for my 011 evo xl case few months ago but only just finished doing the pc few days ago and my 4080 is not working with it. Must be the riser cable. But I bought it moths ago without testing it. Brand new not second hand. Take care anyway.

@@terryoreilly5642 make sure the riser cable is 4.0. I made that mistake with my son’s build. I put a 3060 12 gig card in his and I was using a 3.0 riser. It didn’t work. I wasn’t thinking about it at the time. I made a video on it. His build is in a o11 mini. The vertical mount kits come in 3.0 and 4.0. I didn’t pay attention when I got it.

Thank you so so so much.

You are welcome. Thank you so much. I love you back. lol

The 3060 is a decent card. One of the better 60 series cards compared to the past. I have a 1660 super and a 1060 in other builds. I now have three 3060 12 gig cards Zotac pny and now evga. That 1070 is still a good card. Especially at the price I got it for.

That was my 1st am5 build.

It is a bad ass computer

Have you put them in yet? This last video we put them in the o11 dynamic evo.

Let me know how it goes.

Ubiquity is the only way to go in a home network setting in my opinion

For the most part. Not the mini. The mini has its own special replacement bracket. I did a video on that one as well.

That’s awesome. Depending on the size they are fairly reasonable on price.

There’s something wrong with the hdmi cable or the unit itself. That video is really old. I made another one with a different capture card that I use now. There only $12 to $15.

@@RYNOTECH please send the link. I tried 2 HDMI cables with the same result. In the demo video on the Amazon listing, I noticed after taking a second look, that I can see the screen tearing. If I lower the resolution it goes away in xsplit, but not in obs, but then the audio is out of sync... I guess it's a case of a chip that just isn't fast enough

It’s only a 5800x with a 3060 12 gig card. He’s 12. He’s playing Fortnite and rainbow 6.

Good deal.

They work great. I can’t remember if I mentioned it in the video but they don’t work right with a usb hub. Make sure you use a usb port that is directly on the motherboard front panel is good too.

These turds are surprisingly good.

Hope it helped.

No these just turn you coax into Ethernet and then back

If you have the dvr service it should pop up on the app.

$2500 and up and that’s just for that set. There’s another set for the bulkhead fittings.

Just stopped by to get confused. You got skills my friend.

Trash on all devices. The app has gone to crap. They can’t get it to work right on any device.

I know. I was looking for them too.

Nope, 140's aren't really necessary for case fans but will offer more flow no doubt. 120mm is universal standard still and 140's are more for bragging rights which is why even Lian Li took awhile to release their 140's and still have a hard time getting them..

Lol

Yeah I get it. I just wanted to give the specs to show there’s nothing different in these fan from other ones

@RYNOTECH The point I've spent $600 for Noctua 12 x 140mm & 2 x 120. They're proven the best pc fans at 1,500 rpm, 2,000 rpm & 3,000 rpm. Not to mention Corsair (hands down better than lian li) 2,200 rpm, LL120 White are some of the best on the market, but not even close to Noctua 2,000 rpm for less money.

@@fryguylol right. I agree I just couldn’t believe that someone else put something really similar to the 1st generation uni fans. There was one other company that did this. It was SYY but I’ve never seen them available. And really I’ve never heard of the SYY Brand. Asiahorse was always in there with the cheep budget fan class. Like up here and stuff. Just was interesting to see someone actually did it and you can buy them.

@RYNOTECH Thanks for sharing the video and keep up the good work 👏

@@fryguylol no problem. Fighting the good fight. Lol

lol I know but hey it’s half the price

No, they don't violate anything.. electrically speaking it's as basic as it gets. It's just connecting multiple devices together with RPM and ARGB signaling. Lian Li has their own custom connectors that work with their controller and give you the option to just use the standard. As long as nothing works with Lian Li controllers, there's no infringement.

No, this is allowed in a free trade market so long as they don't copy the unit down to the tiniest detail. These have different lock mechanisms and do not include the software suite lian Li has. They offer the same style and look at half the price and quality but do the Job well. These have a good weight feel to them so they are not junk quality, they work very well for their intended purpose. I put 3 sets in a case and all connected and synced flawlessly.

@@GSP-76 There was another brand that Lian Li filed a lawsuit for patent infringment for a similar style uni fan. Not because of the look of the fan, but something to do with the way they connected. I think it was thrown out but not 100% sure.

@@spentcasing3990 yeah pwm and ARGB connections are open standards used by everyone...if a company goes beyond that and tries suing just because a company made a hard connector between fans, it has zero merit and will he thrown out...but, obviously you can't infringe upon custom connectors that work with proprietary controllers, etc. so if Lian Li sues based on that, it's a different story.

I hadn’t figured that out. I’m sorry.

Yes

One question. Are you running it through a usb hub? If so it won’t work correctly. They have to run directly into the motherboard itself. I discovered that after making this video. That is the only time I have ran into issues with these products. I have 4 devices currently running on one pc. I have the ps4, xbox one the new Atari plus and a camera. No issues at all. I’m not going to dismiss that you may have gotten a bad one. I’ve had brand new motherboards DOA right out of the box. They all were MSI. I will never use MSI boards again. So I understand.

turns out it was a driver setting issue. Put the usb 3.1 device off of power savig mode now works. still some issues , but only when I am trying to run a bunch of programs while playing the ps4. Chrome seems to cause it to glitch out..chrome is a resource hog so makes sense.@@RYNOTECH