Hi great video 🤯what super glue brand do you use and what make of cutting scalpel is it please?
@miltonperea2906 күн бұрын
I got the same grille. Could you make me one? I'll pay for it, shipping & all. How could we make this happen?
@EndMotive6 күн бұрын
Hey, So I don't have the means to make these in any serious capacity so I ended up selling the file. You can buy/download the grille and then get it outsourced to a 3d printing service to get it made. I recommended craftcloud.com! You can save 10% off your order using this code > REFJMGDE7L5 and here is the link to the grille insert > cults3d.com/en/3d-model/various/nissan-logo-insert-for-frontier-aftermarket-grille
@elmackie38427 күн бұрын
Bro. Just fixed my 2019 frontier! Thank u
@EndMotive7 күн бұрын
Glad to hear!
@edwardneilson89709 күн бұрын
I had this on my 2020 Frontier. Turned out it was the hood bump stops on mine not the latch. I put some lube on the stops and the metal where they contact and that fixed it.
@user-my7wf3cn9n10 күн бұрын
its so nice and good man
@EndMotive8 күн бұрын
Thank you!
@DragnDon13 күн бұрын
Awesome idea! You mentioned an Etsy store but didn't link it?
@EndMotive13 күн бұрын
@@DragnDon endmotive.com !
@karlosss186816 күн бұрын
Not sure how hot it is where you are but ABS amy be right on the borderline for handling direct sunlight especially close to the windshield. The positioning of the partial sunblock film on the window may however save the day. Great project!
@EndMotive16 күн бұрын
@karlosss1868 Thanks!, I have had no problems with abs in the Vegas (115f) heat, but I ended up making one out of sls nylon 12 anyways, no worries now!
@MSVideos1124 күн бұрын
Cant wait to see it run
@BlondeVoyage24 күн бұрын
THANK YOU! Just fixed my 2018 Frontier! I asked about it during inspection and he jumped up and down on the bumper, pushed down on the hood and said to me “everything is fine” lol. This squeaking was driving me crazy
@Inner_Sanctum25 күн бұрын
So much room for activities!
@EndMotive25 күн бұрын
Room for "activities" for sure...but the motor is sooo close to the cross member lol.
@SkateboarderPawan7726 күн бұрын
Can you make mold of 100mm longboard wheel please😊
@EndMotive26 күн бұрын
Maybe! Are you wanting to see a tutorial on how to make your own?
@SkateboarderPawan7726 күн бұрын
@@EndMotive yesssssss you are right, you made this very impressively that's why I request you because I believe you can make and show us your talent again ❤ love from India 🇮🇳
@dannymain6838Ай бұрын
Do u drive this when it rains🚨
@EndMotiveАй бұрын
Yes, I did until I sold the car, I drove it through car washes several times too with no issues.
@redryder1312Ай бұрын
LOL nick
@BakerDeltaFourАй бұрын
That sump going to cut through the crossmember?
@EndMotiveАй бұрын
Check out my newest video! I ended up the factory cross member a bit to clean the pan.
@redryder1312Ай бұрын
Keep up the work you do, Nissan will want to hire you
@EndMotiveАй бұрын
Thank you, I think I am pretty far off from that offer letter though!
@Nick-gr8gqАй бұрын
If you don't want to fab I believe Apex Engineering has a front crossmember for the VQ
@EndMotiveАй бұрын
I looked into it, it wasn't a bad option. I am done with the majority of my fab and saved a bunch of money at least!
@pironieroАй бұрын
i fucking love future
@Drakes_GarageАй бұрын
Great video!! About an inch off. Super close.
@EndMotiveАй бұрын
@Drakes_Garage almost there! After a little more work with the hackzall and grinder I got it down where it needs to be.
@Mr.T-HUXАй бұрын
AwesomeThis is an amazing project. Thanks for your experience. To be honest, I doubted that this plastic could withstand the temperature under the hood of a car. How did he show himself in use? Are there any deformations due to high temperature or signs of abrasion? Thank you again and good luck to you.
@EndMotiveАй бұрын
Thank you! I have had my cap covers on for over three or so years now with no issues. They look good still!
@Mr.T-HUXАй бұрын
@@EndMotive Wow, this is incredible. Thank you for your feedback. Previously, I used 3D printed ABS parts in the space under the hood and after six months or a maximum of a year they fell apart... Now I also can’t wait to try this two-component plastic) Thanks again for your experience and your answers. Good luck to you!)
@genericorange9680Ай бұрын
No offense but why a 3.5 L not a 502 big block
@derpgamesvlogs7540Ай бұрын
Cause he isn't trying to please the internet just himself.
@EndMotiveАй бұрын
@@derpgamesvlogs7540 Pretty much that exactly. An LS would have been an easier swap in almost every way, but it is not what I wanted. I am not chasing hp numbers.
@HA3APKOАй бұрын
No offense but why a 502 big block why not a 5.7 hemi
@EndMotiveАй бұрын
No offense by why a hemi and not a Merc m120 V12
@derpgamesvlogs7540Ай бұрын
@@EndMotive no offense why merc m120 v12 and not the 2.5 L 4 cylinder
@abdu7341Ай бұрын
ما شاء الله
@coupons420Ай бұрын
Is that a 280 or 260z?
@EndMotiveАй бұрын
@@coupons420 77' 280z
@coupons420Ай бұрын
@@EndMotive nice
@Drakes_GarageАй бұрын
Killer edit! Can’t wait
@EndMotiveАй бұрын
@@Drakes_Garage thank you🙌🫃
@bigjordan05Ай бұрын
Your a friend from you tube made my life easier 👍🏽👌🏽
@EndMotiveАй бұрын
Glad to help!
@glsracerАй бұрын
I'm happy to see some behind the scenes design clips since I find that interesting and I have been wanting to get into 3D scan based development. Right now I just have a simple 3D printer and I make small parts that I need using 123D (sadly now out of development).
@EndMotiveАй бұрын
Cool, thanks for the input! I will try to include more design stuff in upcoming projects. 123D is a good stepping stone. Fusion360 is great for almost anything but Plasticity seams like a great choice these days too!
@glsracerАй бұрын
@@EndMotive I looked at Fusion 360 but the licensing was too much for a hobbyist. I have heard of Plasticity but I've not tried it. I'll have to take another look.
@EndMotiveАй бұрын
@@glsracer Fusion360 has a free version that would be plenty for a hobby maker. It is Fusion 360 for "personally use" it is totally free just a bit difficult to find.
@glsracerАй бұрын
@@EndMotive I'll see if I can find that version. I know there is another free version but all your designs become public.
@ElijahnesterАй бұрын
What are you supposed to do with the white clip when putting in the new tail lights?
@EndMotiveАй бұрын
I believe they changed the plugs since I made this video.
@joshuameldru4004Ай бұрын
I want to know if anyone has manipulated the internal design of the intake tube. I have a dumb idea of modeling the interior of the tube similar to the barrel of some guns. The thought is creating spin inside the tube just like causing spin on the bullet, maybe it becomes kinda like forced induction? Anyone reading this please let me know your thoughts
@EndMotiveАй бұрын
I don't think i have seen it done with the length of the tube, but they make "swirl" plates that go either into the neck of the throttle body or behind the air filter to spin the air like you are saying...they usually add turbulence and hurt airflow, but a tube with smooth "rifling" transitions might be better than those.
@joshuameldru4004Ай бұрын
@@EndMotive Thanks for the response and interesting to the points you’ve made. Rifling, that was the term I was meaning. If I can find the time I’m still going to try to print it and see what happens.
@ryanjewell9832Ай бұрын
Did you ever end up producing some of these to sell?
@EndMotiveАй бұрын
Hey, I ended up just listing the digital files up and letting people do as they wish with them. I couldn't figure out a reasonable method to get them made for a fair price.
@ryanjewell9832Ай бұрын
@@EndMotive s Gotcha, thanks for the reply, I've been a fan of your stuff for both my Xterra and R51 Pathfinder.
@EndMotiveАй бұрын
Thank you! Hopefully I will get in gear and start making some more parts for them!
@techconcept1334Ай бұрын
4:37 - Nice easter egg ;)
@EndMotiveАй бұрын
Lol, I actually forgot about that!
@redryder13122 ай бұрын
Wow Nick, you got the utlimate project. A low milage VQ35? Glad to see you stuck with a Nissan engine
@EndMotive2 ай бұрын
The engine is out of a 2008 Infiniti G35. Thank you!
@Drakes_Garage2 ай бұрын
Hell yea buddy
@MichaelBagmut2 ай бұрын
beautiful parts, thank you for showing the process!
@EndMotive2 ай бұрын
Thanks for watching!
@Techsticle2 ай бұрын
Great job! Thank you for sharing!
@EndMotive2 ай бұрын
Thanks!
@ShibbyImpalaShibby2 ай бұрын
Just curious what material you printed with? PetG or ABS?
@EndMotive2 ай бұрын
ABS
@michalvallo15332 ай бұрын
How to bevel oval letters ?
@michalvallo15332 ай бұрын
With oval font*
@EndMotive2 ай бұрын
@@michalvallo1533 I just used the chamfer tool with uneven lengths to get the effect.
@Alex-vz2jz2 ай бұрын
What program do you use to be able to split them into pieces? I want to 3D print larger objects but be able to split them like you did while adding that little notch you did for the inserts.
@EndMotive2 ай бұрын
I do it all in fusion 360. I create an offset plane every 120mm or so and then use that to divide the part and then manual create the dowels and then do a subtractive cut of the other half....hopefully that all made sense.
@Alex-vz2jz2 ай бұрын
Nice swap. Usually everyone goes with an RB or 2J, this is something you really don't see with these swaps. Cool swap, new sub and can't wait for future videos.
@EndMotive2 ай бұрын
Thanks!
@snarleycat2 ай бұрын
At least it was carpet
@squidy.85202 ай бұрын
Why does the VQ35HR always get invited to car meets?... Because it's known for being the life of the RPM party, and it never misses a beat! Great Choice! Cant wait to see more.
@EndMotive2 ай бұрын
what in the ai generated comment is this?
@jamminwithmatt53132 ай бұрын
who?
@redryder13122 ай бұрын
You make any more Nic?, maybe send them out for chrome plating for options. I still have the two I made in chrome.
@EndMotive2 ай бұрын
I havent made any more, but chrome plating or painting might look good!
@redryder13122 ай бұрын
@@EndMotive my version looked cool, just no desire to pursue it.
@802Garage2 ай бұрын
I mean, no doubt the VQ is going to make way more power than the L28 and be more fun in general. The only real downside is the sound, and that can be largely fixed with exhaust tuning. I have a 1984 Nissan S12 I want to engine swap in the future. Debating between a VQ or a rotary. After swapping a 13B into a BRZ for a friend, I think I need one in my life.
@EndMotive2 ай бұрын
Yeah exhaust will take some work to get a decent sound. Rotaries are awesome and sound really cool....just the reliability scares me.
@802Garage2 ай бұрын
@@EndMotive Once you know the right people, mod them a little, and run premix, they're pretty golden if you don't do anything dumb. ;)
@juana96502 ай бұрын
just subbed, vq’s get so much hate but they really are amazing engines can’t see how you go about this one
@EndMotive2 ай бұрын
Thanks! This will be pretty tricky to pull off but I am feeling fairly confident so far. The Vq is a pretty solid motor, surprised they are not more commonly swapped.
@binoyperera41612 ай бұрын
is it possible to do the same for a steering wheel emblem?
@EndMotive2 ай бұрын
Yeah its definitely possible!
@Ratpackapunch2 ай бұрын
I ordered the male pin connections but I came with them, I needed the female why me
@Drakes_Garage2 ай бұрын
Hahahahahahhaha
@Hanime694202 ай бұрын
"I just Linus'ed it oh no" is really accurate
@Spider_ManEditz-g8l2 ай бұрын
We hate u. Gonna dislike this video so it cant get trending so other people dont want to feel this pain