is there a version of this engine that gives you a rear sump similar to a F body rear sump on a camaro?
@AliasProductions801Ай бұрын
Since this video released the M120s cost the same as 1GZs now hahaha That said I’m really looking into a V12 swap for a Lotus Esprit. Hardly anyone makes a transaxle solution for either of these though. Only thing I could find was an adapter for a PDK. This is going to be a tough one to get going haha.
@C0rvette454Ай бұрын
Sell me a m120
@nzzl12 ай бұрын
This is gonna be my dream build 😊
@777motorssss3 ай бұрын
Can you guys make a kit to fit a m120 into a rx8 I’ll buy asap
@CollinsGarage_Crett_Bollins3 ай бұрын
Thats not a bad idea, let me put the scans together
@aldridgejeff43223 ай бұрын
Can you make an adapter for the Honda V6 J-series engines for like a 4L60e, I love the motors but would like them in a rear wheel drive application.
@knoxsp4 ай бұрын
Hi, How do you fit the e46 transmission? Do you modify the PPF, or do something different?
@magaalan4 ай бұрын
Tengo un S14 con diferencial de z32 que flechas(axles) debo de usar?
@pssavage51485 ай бұрын
Love the swap can u send .me a list of everything I would need to do the same swap on my rx8
@rosevarney90483 ай бұрын
Same!
@RubenRodriguez-ul6cv5 ай бұрын
Hi, this is a great video, I always like the M120 engine. I have my project Ferrari 355 that I would like to put a M120 , I been thinking in removing and relocating the gas tank to have more space for this engine because this mid engine vehicle got a really short rear and is a mid engine car. Do you think it could be done? I don’t know how long is the M120. Thanks for your videos and advice.
@CollinsGarage_Crett_BollinsАй бұрын
Yeah that's not a bad idea the 355 Ferrari engine is pretty amazing though flat-plane crank with 5 valve per cylinder sounds so good. I guess the only thing that would sound better is a over Square v12! The V12 was pretty long I don't have exact numbers but it is going to be substantially longer than the Ferrari engine.
@ivanrivera99335 ай бұрын
Just buy an Acura Tsx...
@mikelmarion6 ай бұрын
Any updates?
@brycemueller73306 ай бұрын
I just bought a 96 Mercedes s600 V12 coupe for $1600. I found this video researching swap options for this motor! Im following this! I have a rust-free 87 Supra I was thinking about trying and swapping the Mercedes motor into!!!
@wdblackman5 ай бұрын
I have an 89 Sport Roof NA that I contemplated swapping in a V12 as well. Might have to use a BMW engine to make it fit in with the A90 crowd.
@CollinsGarage_Crett_BollinsАй бұрын
That's not a bad chassis to do it in, there is a french guy in our V12 chat that has successfully done the swap
@lea2666Ай бұрын
@@CollinsGarage_Crett_Bollins There's an american girl that successfully put a m120 in her 240z too.
@Brock19126 ай бұрын
Oh boy, manual swapping my 1992 600SEL has always been a dream. Especially considering the transmission in it is currently shredded.
@mr70camarors7 ай бұрын
I am very interested in any project done with the m120.
@mumblety96Ай бұрын
Jaguar XJS would be PURRfect with a 6 speed manual. Not so much power that you'd have to modify the rear suspension.
@bobolulu76157 ай бұрын
Whats more important, is what is the total length of these engines, from the back of the bellhousing mount surface, to the front of the crankshaft pulley. We need to know if these engines will fit first!!
@CollinsGarage_Crett_BollinsАй бұрын
I can get that data for you guys it's just going to be a minute.
@BenzAddiction7 ай бұрын
Great info mate, thank you.
@quintenhart83307 ай бұрын
Ok so old video but new question. Can you swap it with the auto transmission?
@freestyleskyline8 ай бұрын
60° V12 buddy. Not v8.... And they make 350ft tq vs 300hp.... They make 300 at only 1000rpm though
@Andrew-kt3lk8 ай бұрын
do these options also fit into a s14
@dimkanon90938 ай бұрын
Недавно купил себе за 40к рублей м120, это 500$
@CollinsGarage_Crett_Bollins8 ай бұрын
That is such a good deal! I wish they were that cheap here in the states!
@sveingustafson51208 ай бұрын
'promosm'
@CollinsGarage_Crett_Bollins8 ай бұрын
not really, we don't spend any money on advertising for stuff like this, this is really just a passion project before V12's are non-existent anymore.
@bernardwarr41878 ай бұрын
You need to change the cams in those M120, sure will make them wild
@CollinsGarage_Crett_Bollins8 ай бұрын
do you have a lead on some cams? I'm keen!!
@dangunit697 ай бұрын
@@CollinsGarage_Crett_Bollins It looks like Gooichi is offering a CNC ported head with custom valvetrain, billet camshafts, and ITB options. They are reworking the M120 to rev in the 9-10,000 rpm range, and while I haven't seen their engines run, or seen specific flow/power numbers yet, there might be some options there to suit your needs, so you might want to check them out. Cheers.
@mumblety96Ай бұрын
@@dangunit69 link?
@patrickvanderveen494519 күн бұрын
@@CollinsGarage_Crett_Bollinswhat about the cams of an c36 in-line 6???
@glennc72018 ай бұрын
I worked for Toyota for 20 years and still prefer most of their products,that said, I am a huge m120 fan. I have an sl600 and I also have 2 complete m120s waiting for projects. I owned many Celica models over the years and I envision an m120 powered 84 gts coupe. I have my sl600 cat delete with otherwise stock exhaust and it sounds good as is,but if I ever drop one of these into something I would go with a longtube header for sure. What manual trans do you use along with your adapter plate?
@CollinsGarage_Crett_Bollins8 ай бұрын
Currently we have the 350Z 370Z 6-speed transmission adapter plates for these. check the link in the description, and lead time is about 30 days on V12 stuff right now. I'm excited to come out with some more transmission options as well. A good friend of mine wants a 8HP70 box for his LS430 so I'll probable make that for him as well.
@jak4048 ай бұрын
What's the weight of the 1gzfe?
@CollinsGarage_Crett_Bollins8 ай бұрын
its pretty heavy, I will have to weigh it when I get home, Its got to be near 655ish if my research is correct, +/- 30lbs.
@mikelmarion6 ай бұрын
@@CollinsGarage_Crett_Bollinsit’s around 605 lbs I think
@calaboot11538 ай бұрын
You always have something wild cooking up!
@CollinsGarage_Crett_Bollins8 ай бұрын
hey come get this FRS I don't really want to sell it but I'll take $4300 firm for it
@Beckerhead8 ай бұрын
Any way to get dimensions on these? Length (bellhousing to front of accessories) width at the widest point and height (oil pan to intake manifolds) and weight (with accessories as sort of a pull out)
@CollinsGarage_Crett_Bollins8 ай бұрын
Width on the M120 widest part of the throttle bodies is 32.0625", if you go off of the widest part of the intake manifold no TB it is 24.25". The left side has the oil filter boss sticking out awkwardly which you can relocate easily. Front to back its 31.75". Top of intake to bottom of oil pan is 26.125" these are all rough dimensions please don't use them for anything critical.
@randywatsonii31738 ай бұрын
thanks for those measurements, that’s a big help for sure. You guys wanna do the swap on my C3 for content? I have the M120 with 92xxx. Engine bay is empty on the Vette. That’d be fantastic lol! Anyway thanks for the dimensions
@mikelmarion6 ай бұрын
@@CollinsGarage_Crett_Bollinshow do these measurements compare to the 1GZ?
@CollinsGarage_Crett_BollinsАй бұрын
@mikelmarion that's a good question I'll have to open up the scans and measure them accordingly. There is many levels of the 1gz that you can take apart as opposed to the m120 meaning you can take the upper intake manifolds off and create a block off plate to make them shorter in height and then remake the intake plenum. You can also remove the plenum switching valve Reservoir which sticks out to make it a little bit thinner as well.
@mikelmarion8 ай бұрын
Can’t wait to see the development of these 2 engines!!
@dunbarautomotive8 ай бұрын
Long time no see 😊
@exceedzation54658 ай бұрын
Do you guys have a full swap kit including all smaller parts I would need like downpipe and any clearing problems
@CollinsGarage_Crett_Bollins8 ай бұрын
We do have another shop we work with to supplement the other parts that you mentioned. For NA builds we have a swap header for it that works pretty good.
@thebeast-zf6jb11 ай бұрын
Piece of shit ls swap is better and faster than the honda k series
@akilimorrison8911 ай бұрын
What about the drive shaft? What's the setup for that? CD009 drive shaft or RB drive shaft? Was there any particular modification on that side?
@CollinsGarage_Crett_Bollins8 ай бұрын
We make a complete custom shaft for the swap, its included when you select it from the drop-down menu
@RealityUntold11 ай бұрын
My J30 has 6 bolt axles and 3.9 gears
@briangaglio9450 Жыл бұрын
Does this work for a CD009?
@CollinsGarage_Crett_Bollins8 ай бұрын
no it doesn't but we have a CD009 Kit for K-Series on the website
@BillAnthony-lt6fx Жыл бұрын
Wiring
@CollinsGarage_Crett_Bollins8 ай бұрын
we have a Haltech 2500 system that works with this and TCS has our startup tune for it, along with a Haltech harness for K-series etc.
@Brilliant.sux1 Жыл бұрын
just watching is there an update for full kit ?
@CollinsGarage_Crett_Bollins8 ай бұрын
Hey we just updated the adapter plate and have forward facing intakes instock
@TUGRA145 ай бұрын
@@CollinsGarage_Crett_BollinsHey is the FRZ/BRZ better swap option for track use only or the Rx8? I’m in between the two. rx8’s are usually 3 grand cheaper to find than a frs.
@gtseriespolska3484 Жыл бұрын
hello, this is awsome swap! What Oil Pan should be used for K20? Can we use Acura part you mention on video?
@CollinsGarage_Crett_Bollins8 ай бұрын
Hey, you can use the aluminum oil pan with significant welding if you would like to save money, but we suggest just getting a premade front sump from one of the big manuafacturers
@Sugin14 Жыл бұрын
This was really informative I thought it was going to be way more complicated thank you
@kristiangnarsen Жыл бұрын
So the 5 bolt q45 axles fit into a 29 spline hub?
@Mid-Day-Jay Жыл бұрын
Hey are y’all still making headers for this can’t seem to find anything online about this! Thanks
@brandonlittle6444 Жыл бұрын
Theyre 32, not 30 spline, but good one. What would be amazing is some aftermarket axle (shafts) or a solution that doesnt use the wonky DSS spacer and VAG 108mm CV
@minni1094 Жыл бұрын
Why has no manufactured a gear set for 240sx differential? Is it that hard?
@GTXRefael Жыл бұрын
how would you do the wirring part?
@100056463 Жыл бұрын
Are all the internals the same in these? I have a GTR diff that I wanna throw q45 crown and pinion gears in to go better with my lS swap
@chrisgaller2992 Жыл бұрын
i am doing Celica RA 40 k24 swap with w50 gear box can you supply total kit to suits.
@jayroverduzco2291 Жыл бұрын
how about j30 diff direct bolt up to s13?
@Michelle-414 Жыл бұрын
Is this something any very good, well equipped mechanic could do?
@Michelle-414 Жыл бұрын
Does it pass emissions from Wisconsin?
@jvogler_art4708 Жыл бұрын
I approve of this swap. More power and reliability than that rotary ever had. As much as I love the rotary. The rx2 and rx7 are some of my favorite cars.. but it’s just not worth the time in the rx8 to deal with that high maintenance low power engine… I respect the rotary in the right context, the quad rotor race cars are absolutely stunning. but in a 200hp rx8 with no turbo… it’s just not worth it. Atleast you get a nice platform for your swap in this car. A bigger better looking car than the Miata… but it’s got to be a tight fit for sure.
@elysiumgaming28668 ай бұрын
Just buy a different car
@bhuvstechworld97433 ай бұрын
@@elysiumgaming2866cope harder
@elysiumgaming28663 ай бұрын
@@bhuvstechworld9743 cope with what? lmao! XD NO PLEASE DON'T LS SWAP NOOOOOOOOOO
@bhuvstechworld97433 ай бұрын
@@elysiumgaming2866 LS Go brrrrrr
@bhuvstechworld97433 ай бұрын
@@elysiumgaming2866 honestly the stock rx8 engine is dogturd and most of these rx8s will get rotten in a junkyard because of that the Rx 7 13b engine was miles ahead of the renisis.The rx8 is the best car for an engine swap too because there is a lot of blown ones in junkyard
@mugensamurai Жыл бұрын
You done something Mazda couldn't do with this car. Make it reliable.
@Will0w_Th3rianPawzz Жыл бұрын
Was wondering if anyone has J series kit for the Rx8?