Excelente video!!! me ayudo en un Yaris 2013, iba a comprar el reemplazo, pero hice lo que mencionas y funciona perfectamente, muchas gracias!!!! Great Video, very helpful fixing my yaris 2013, I was going to buy a replacemnet, now is working perfectly, Thanks a lot!!!

So my question, I'm looking for a video my car doesn't make a lock or unlocked noise with my remote is it supposed to?

Gotta say, thank you so much for your experience here. Bought a $10 dollar motor and replaced it with no issues... 😅 I did forget to insert the key piece and the door handle to the actuator, but was able to fix it using your video as guidance. I must have skipped that warning or just kept rewinding. Anyways, thanks so much, Dan.

I just got a 2009 Yaris that doesn't have a fob and the key no longer opens the door! I was just told I can never lock the doors. 😞

Great video, for those of you guys having AFTER MARKET actuators installed, here's my solution: Mine is a 2007 Yaris sedan, it didn't come with power locks, so I have someone installed the aftermarket actuator couple years ago, and I have the same problem came up recently (the keyfob can't lock the door, the door lock/unlock switch seems lack the power to go all the way in to lock the door). So I take off the panel and found the screws that tightens the actuator on the door are loosen, I just have all the screws tightened and put the panel back on and it worked(yeah, easy as that), hope it helps.

kzfaq.info/get/bejne/ac55gs-ds6mxg6M.html

THANK YOU for this video! It gave my husband and I the info and confidence we needed to tackle this project on my 2009 Yaris. We had the same issue with the residue on the motor, which solved the problem. We also introduced a new issue by reassembling the pieces incorrectly so thank goodness you showed us how to test for that! We thought we got lucky because our pieces didn’t fall out but it turns out they did get misaligned and a wire spring-type thing underneath all the obvious moving parts had fallen out of place. (If the white lock part that moves above the gear isn’t very clearly clicking in and out of the locked position when you move it up and down, your pieces aren’t in right!) I ended up taking apart and reassembling the actuator half a dozen times but I eventually figured it out and, long story short, the power lock works again! Thanks again. Your video saved us hundreds of dollars in parts and labor fees and helped us take on an interesting project!

Great video! Do you have same video for a 2012 Toyota Yaris?

Very helpful video sir, thank you very much for sharing.

This fault occurred on my wife's yaris the passenger door. It was locked shut so couldn't gain full access. . A quick fix is to remove the armrest trim & screws, this will expose the moulded joints where the 2 parts of trim are connected. Hacksaw blade the first 3 to 4 apart, enough so you can get some leverage to pull enough of the trim back to get access to the door lock motor. Remove the wiring clip from the motor, then strike the motor a couple of times with a spanner. Plug the wiring clip back in & try the central locking. This will eventually work & will allow you to open the door to gain access to remove the screws holding in the lock & motor.

Great video! If you don't open the actuator assembly upside-down (it's upside down in the video, that's why it fell apart) it's not so bad, I recommend trying it before blowing $300 on a new one. Make sure the white electrical connector is facing up when you separate the two halves.

PLEASE DON'T IGNORE AND READ HOW I WAS CURED FROM HERPES VIRUS . this is a life witness of the cure to this virus, is not longer a story to me or a rumors,doctor mohammed FACEBOOK PAGE who cured my HERPES VIRUS facebook.com/Herpes-cure-with-herbal-medicine-643324002519440 i was once told that there is a cure for HERPES VIRUS but i did not believe until my friend gave a try of the herbal medicine and it work perfectly well for him and i witness the doctor report after taking the herbal medicine, the doctor said that there is not trace of herpes virus in his blood system , i was shock and i order mine and it was deliver to me by DHL, which i took as was prescribe and am perfectly free from it by doctor confirmation report. Doctor Mohammend email, [email protected] whatsapp / call +2349036036397. i can boldly say that there is a cure for this virus with full assurance and confident

Helped me.appreciated

Very useful video, many thanks! I have a problem with the rear door not locking. So i fiddled with it, and first it locked and I could not open it. Fiddled some more to get it open. Now the latch is in locked position so door won't shut at all. This is draining my battery slowly. Arrghhtt#@$%%#^&! What a piece of crap. Does this technique work for the rear hatchback model too? Its a 2008. I'll have to work upside down since door pops open.

I couln't get mine back together

Very professional video

Nice one, thanks,

Just bought a 20mm Flat Shaft motor.It works great ,great price.Hope it helps someone! www.ebay.com/itm/352608938543

You recommended a magnetic tipped screwdriver but you didn’t use one... hmm. But you made a good video and you didn’t wear gloves like they did in the last 3 door lock or window crank removal videos I watched. You get to keep your man card!

wow. very thorough video. now, wanna do one for MY car? LOL.

This video combined with kzfaq.info/get/bejne/gKt5qqRn1NrOfXk.html just saved me a 240 euro repair. Very much appreciated!!

great

My door lock has jammed locked, with the door closed..... so I can removed all the screws for the door panel, but I can’t get the panel off cause the door is locked shut. Any suggestions?

Thanks! This video was a life saver. I ordered a new non-oem replacement but they sent me an actuator for an '09 Camry instead of a Yaris. Which worked except the door handle linkage was in a different spot on the actuator so the cable throw was longer. I decided to order a new motor instead of another actuator after that since I couldn't get the motor housing off to clean it. Only part I wished you had in your video was a way to reassemble the actuator since parts fell out as I took it apart to replace the motor as well. LOL. Either way thank you so much. I am now an expert on removing my door thanks to you. Ha ha ha!

Cool rims tho!

Dude, thank you so much! Your video saved my life! I saved like $350 fixing this myself. My case was a little different than yours: the little motor seemed fine, even I couldn’t opened it since it was slightly different from yours (mine is a 2014 sedan), I applied a little lubricant spray all over it and spinned the rotor a hundred of times, then I sprayed a little switch inside the actuator to remove any particles, after that I put it all back together and worked pretty well!

my door latch will slip thru the hole so there is no reason to remove the cables. my yaris is a 2010, could be different on a 2007

Great video but this is why I try to avoid power locks.

Great video, my lock has just packed up so with your help I can have a go myself - thanks.

Great video! If you do this yourself make sure you pay attention to how the top part of the actuator connects to the bottom. I spent some time troubleshooting the lock/unlock motion because a piece of the top wasn't in the proper plastic guide on the bottom piece.

el mio se me bloqueo pero con la puerta cerrada como lo habro