It's finally mission complet. next making them foled😂😂😂
@jburgess216 күн бұрын
Would you recommend?
@ajfocus16 күн бұрын
Definitely!! Is a must! The standard Fiesta throw is so long and this makes it feel so much better.
@MartinJones12319 күн бұрын
My ST225 also has a wobbly drivers seat in the same spot you pointed out... Will have a look underneath the seat...
@ajfocus16 күн бұрын
@@MartinJones123 common on these seats the bar at the back bottom snaps off! It's a very weak part of the seat for some reason.
@MartinJones12315 күн бұрын
@@ajfocus Ok cheers 👍 I have to have another look because sometimes it feels loose and sometimes it just creaks... There also seems to be some seat foam on the rear driver's side floor mat...
@swhoknows624129 күн бұрын
Did you do anything with the egr when fitting this mate?
@paulattree4171Ай бұрын
cable ties are good
@paulattree4171Ай бұрын
Is the passenger seat for sale yet.
@paulsims7161Ай бұрын
That’s not a drill bit for doing this job !
@paulsims7161Ай бұрын
Far too much waffle !
@mehmethanaris8073Ай бұрын
Do you only need 13mm ratchet to do this? Or socket too?
@kiesermitchell59572 ай бұрын
was the engine from the 2.5 vectra b shape by any chance step dad had estate one was quick af wafted past his 330d 😅
@Bryan-M2 ай бұрын
The pins are to stop thieves from taking your stereo. Also it’s bulky because it’s a cd player.
@phillipmuchena84172 ай бұрын
Unnecessary additional information
@186scott4 ай бұрын
I am face lifting my mk6 fiestas dash and i will also have to change my door mirrors as the pre facelift fiestas have different plug shape so when you do buy the door looms make sure you get the correct looms and i will be removing the everything off the doors and while the door is stripped i will color match the handles and put sound deadening on the inside
@JUSTDOIT-wv1jb4 ай бұрын
What with the 2 plastick washers?Where they goes?
@ismailansari22084 ай бұрын
Hi from Morocco,I did the passenger side to day.and it's was to stressful and hard.but thanks anyway
@zouhairfarahat1540Ай бұрын
Salam akhi ,wach derti jwayh b joj ?
@ismailansari22088 күн бұрын
Ah lyom salitho
@ismailansari22088 күн бұрын
Mnin nta
@chrisjones69466 ай бұрын
Hey I've got on ford fiesta mk6 all gears work perfely fine apart from reverse it will not go in reverse at all and yesterday while my my mum was driving the engine was running at the lights when at dead stop I could smell a burning smell coming from somewhere any ideas
@dannykyla696 ай бұрын
I just got a fiesta and yes I regret it. It's a rust bucket haha
@ITzWolfx6 ай бұрын
What gear knob and boot do you have mate?
@IdrisShenaee7 ай бұрын
I'm trying to change my car glow plugs Ford Fiasta 2011 it wont start at all, I took it to too many garages no one knows what is wrong with it, the AA says the glow plugs need to be replaced and no garages willing to do that any advice thanks
@ajfocus7 ай бұрын
Weird that no garages want Todo the job even though that's the whole point of a garage lol 😂 my advice is of you can attempt it try it soak them for a few days with brake cleaner or something strong to soak through the glow plugs. I soaked mine everyday for 4 days. In the morning, afternoon and night I soaked them. End of the week I ran the car got it hot came back let it cool slightly and then attempted to crack them off... Incredibly slowly though if you feel it's not going to budge move on to the next one. And soak that one again. Very slowly turn them you will hear cracking because that's the carbon built up. But if you hear or feel it's something else then stop because you can snap them off in the engine block. Bit of a git to get out. Hope it helps you bud good luck 🤞
@IdrisShenaee7 ай бұрын
@@ajfocus Thank you its been a week now put DW40 on all of them hopfully they come out nicely and I will try be very careful thanks again
@jamesarcher53208 ай бұрын
Not that rare
@guppylove72008 ай бұрын
What turbs you got on it ?
@joostonline51468 ай бұрын
its the cold side... nice blue tape on your rubber hose though
@guppylove72008 ай бұрын
Aup bud is that the original turbo
@stulefley59849 ай бұрын
Next time use a ramp bro and the right tools 😂god loves a tryer 👍
@303mortimer39 ай бұрын
12:10 is the sun getting to you a bit there
@nikolaservis9 ай бұрын
Can use this injestors on 1.4tdci?They fit on 1.4?
@ajfocus9 ай бұрын
No unfortunately not there shorter on the 1.4s I think
@Focusstmk2.59 ай бұрын
Forge lol thats not a forge recirculation valve thats an ebay special 😉
@michaelbailey364810 ай бұрын
I'd love to see a how to video of this man, been searching AGES for one. I've got two grilles for a mk6 sitting here to try. Just not confident in my approach at some points if I tried it. Par two coming soon?
@ajfocus10 ай бұрын
Yeah there's a full feature video coming soon. It will be mixed into a super longer episode. And later in the year into a separate episode. I will get posting this video soon. Stay tuned
@essexginge916710 ай бұрын
ford wanted £150 for doing this crazy price for 3 bolts and 10 mins
@ajfocus10 ай бұрын
Ouch! That's ridiculous. Can't believe they can charge that much. I guess the part would also cost 5million pounds with VAT 😆
@Focusstmk2.510 ай бұрын
Tbh I dont actually think you would even notice any more power lol
@DriveWithAndy11 ай бұрын
those end shots are great. Cool to see more mk6 fiesta content. You may enjoy my "Just Go Drive" video i uploaded recently
@ajfocus11 ай бұрын
Thanks for the comment. Nice to meet another fellow Mk6 owner. Glad you enjoyed the scenery shots spent a good few hours getting them just right 👌 I be sure to check out your video. Subscribe if you wish to or be sure to follow my socials Instagram or FB at AJFocus
@DriveWithAndy11 ай бұрын
where was this?
@mik82311 ай бұрын
That was pretty much useless.
@daveytn11 ай бұрын
What's TDCI about a 2.0 petrol
@ajfocus11 ай бұрын
Showing that a part from a 2.0 ST150 Fits all Fiestas inc TDCi versions. 🤙
@reflexgaming173111 ай бұрын
Whole point of this video was to show how to disconnect the back connections and replace knobs and we dont see that. :(
@mikle6511 ай бұрын
warm up the engine red hot before.
@user-gy9wu6oz4n11 ай бұрын
May want to check those rear dampers are not sitting on the bumps stops once car back the ground, those bump stops are for a standard height damper not a shorten/lowered damper setup. I know ford use to sell an eibach lower spring kit that came with shorter bump stops to suit lowering springs, but they would sell them separate only as a kit with springs unfortunately.
@aaronpriestley133111 ай бұрын
Hi, what are the correct torque settings please
@kevingoldbey740111 ай бұрын
Fair play buddy it's not easy on ur own I done mine last week too we're u get the back transmission engine mount that's a good heavy duty one im looking for one I whent true three off them standard ones 😢
@user-xf8yr5ot4s Жыл бұрын
Iv just came across this video. Do I need to jack up and take wheels off. Could I just use ramps
@simonlowe4013 Жыл бұрын
You missing the ST pal?
@Flysohigh18 Жыл бұрын
love your genuine reaction and the uncut test drive video :D gj
@shaunwelch9176 Жыл бұрын
Subbed 🎉 Plus the video keeps freezing, try sort it. Lol.
@ajfocus Жыл бұрын
thanks for the sub! Plus the video was LIVE! so using data outside signal wasn't the best.