This feature is to read and erase DTC codes, depending on the nature of the code and the potential issue, the code may return in future.

Hi Kermets, thanks for your enquiry. If you just have two cars to remap it would be more economical for you to purchase two home tuning tools for these, I would highly recommend our MyGenius home tuning tool more details of which can be found here:- viezu.com/personal-tuning-devices/

If you would like us to put together an estimate to you for these with accurate shipping costs please do let us know by emailing [email protected] or by responding to this message with your email details. Many Thanks, Eve #TeamViezu

Good afternoon, Many thanks for contacting us here at Viezu. This system does make a massive difference and gives the C63 an even deeper growl and louder. However this might not be as appreciated because of the microphone unfortunately! Kind regards, Elle

We certainly do. JLR V6 2018 are supported with our home tuning system. If you can drop an email to [email protected] or call our office +44 1789 77 44 44 to speak to one of our team, they will happily talk you through all of the available options,.

Yes you can if you are a master. The way the powergate works is that you have a powergate manager within your Alientech Dashboard. When the powergate reads the car it uploads the file into the dashboard via the cloud and then you can download to put into any file writing software to make the changes. Then load back into the powergate manager section and the tool can then write that back to the car. If you have any questions please feel free to call us on 01789 774444. Oliver

This is running our Milltek exhaust system. If you would like to find out more or to get prices and availability for upgrades for your vehicle, contact one of our team today: [email protected] or call +44 1789 774444

Hi, 200cell high flow performance cats allow the engine to breathe more freely. Depending on the engine they will often gain noticeably in the mid range and towards the top end by as much as 20hp and 20ftlbs of torque in may cases.

Yes, this allows you to tune your own vehicle. when you purchase this from Viezu you simply download a copy of your vehicles ECU data which is then uploaded to us. Our Technical Team will then make modify your file to the tuning level you request and upload it back to your Powergate app. Then you simply upload it back to your car. It's a very easy to use tuning tool and puts the power of tuning in your hand.

The Kessv2 is no longer sold from new as it has been replaced by the Kess3. The Mazda RX-8 is available to read and dependant on the activation of the equipment depicts whether you can make amendments yourself or not. The slave versions read the ECU but the file produced is encoded and you would need to send to the master you are linked with to make the changes. A master version produces an open file and you can then use additional 3rd party tuning software to edit the file and make the necessary changes. If you would like to know more please get in contact at [email protected] or call on +441789774444. Oliver

Hi Mr Yodaone, we provide tuning for automatic transmissions and manual ones, if you can send us your details to [email protected] , one of our team will be happy to talk you through the options available for your vehicle.

Hello, We would definitely be able to do some great upgrades on your XKR! Please contact me at [email protected] for more information. Kind regards, Elle @ VIEZU

Hi, we certainly do, covering gasoline and diesel engines and all the major tuning tools and software. If you can PM us your details we can send you our Viezu Technical Academy information pack. In the meantime you can check out our range of online courses here www.remap101.co.uk/ We also offer our course in house and have international training courses throughout the year including at SEMA this year.

Hi Shantha you can download the K-Suite software from viezu.com/software/.

You can store 4 tunes + the original tune per vehicle. This tool is designed as a home tuning device where you can select different modes on the car utilising the app on your phone. You can pay to have other sessions so you can access another car with it as well.

Hi Joseph, please give our team a call on +44 (0)1789 774444 to discuss options for your own car. Or if you prefer drop us an email at [email protected]

We have training videos on how to use the tools that are free of charge and we provide training classes on how to write your own files as a master tuner. check out www.remap101.co.uk for more details or contact [email protected]

You will need to speak to Stevenson tuning as they will be providing the file for you.

We have these training videos you have watched on how to use the tool in bench more etc but what sort of course are you looking for. We provide courses on file writing in various softwares such as ECM Titanium and WinOLS

Hi, the original kessV2 has now been superseded by the all new and greatly improved KESS3. You can see more about the KESS3 here viezu.com/alientech-kess3/

We support client and master tool users, whether you are starting out in the tuning world for the first time, or have your own dyno and workshop and have been tuning for 20+ years, Viezu have the tools, training, file service and technical support for all tuners. you can contact our team on [email protected] call on +44 1789 77 44 44 or DM us on for more details and information.

No problem 👍here to help if you need anything, we have upper and lower pulleys and lots of other upgrades in stock ready to ship

Hi Richard, yes the P450 is mechanically the same, so all the power upgrades are the same, and power can be unleashed in the same way, here to help if we can viezu.com/jaguar-f-type-predator-tune/

Are you a tuning company looking to use this for your customers or are you looking to purchase for your own car.

@@ViezuTechnologies I offer remapping services

we will be delighted to help, we offer live 7 day a week support, training and file service, file prices start from just £35 for DTC, and tuning from £42 per car - you can see much more here : viezu.com/services/tuning-files/

Good morning, Many thanks for contacting us here at Viezu, please contact me at [email protected] for a cost breakdown of this, I look forward to hearing from you. Kind regards, Elle @ VIEZU

It is roughly €99 a month for less than 10 slaves and €199 a month for over 10 and €10 per slave tool

The gearbox is fine for this type of power, we have tuned many hundreds now and covered many thousands of miles in testing, we have never ever seen a single issue with the gearbox related to tuning. Wheels would fit an XJ too

@@ViezuTechnologies nice to read that. I got a 2010 xfr and ill be building soon. Thanks for this vid

we offer both 7 % and 10% smaller, the 10% pulleys do require the supercharger snout to be machined down to fit

Hello, Many thanks for your comment. For your vehicle it would be a 6% pulley. Please contact me at [email protected] for more information. Kind regards, Elle

Hi Emrey, thanks for the comment. If you contact or trade team they will be able to take you through all of the options available and the pricing of the ECM. You can always view more details here. viezu.com/shop/alientech-ecm-titanium-3-0/

hi, you can find the exhaust system on our Paramount Performance site on the link below. If you have any other questions or require any further help and assistance, please just contact us and one of our team will be happy to help. paramount-performance.com/jaguar-f-type-2-0-exhaust-kit-valve-controlled.html

This was the 4.2. The exhaust systems are predominantly the same though for both the 4.2 and the 5.0 V8. If you would like to get this booked in please contact us on 01789 774444 or by reply to this email. Alternatively you can book online by using this link: outlook.office365.com/book/[email protected]/

Hi you can buy this online at viezu.com/shop/alientech-powergate-3/ or you can contact us on [email protected] Oliver

Hi @crisfher, we have training videos on how to use the tuning tools on our training site remap101.co.uk and for detailed instructions of a specific ECU inside of the KSuite software you have commented on above, you simply need to plug your Ktag tool into the software, select the matching ECU in the application list and you will be able to see the connection instructions. If you need information on the latest Kess3 tools, please contact us on [email protected] and one of our team will be happy to help.

Hi David, it is locked to one vehicle at a time. However, you can use it to tune other cars by "unlocking" the powergate in order to tune a new or second car. Please contact us for further details.

Hi @jaynikk758, it most certainly is. If you can contact our team directly on [email protected] or call 01789 774444 to talk to one of our team about tuning your 2004 XJR.

@@ViezuTechnologies Awesome. I am working on supporting modifications like intake, exhaust, and smaller pulley, then I will reach out to you guys to make the best of these mods.. roughly what power numbers could I expect from the tune? Thanks!

38 to 40bhp, or 55bhp if you add the smaller supercharger pulley too

How do you mean? If you want to programme the powergate yourself you will need a Kess3 master to act as the decoder otherwise you can use as a self tuning device and Viezu will provide the file.

Hi jM_2700x thank you for reaching out to us. This one would be £289+VAT for onsite tuning here at HQ. We produce some fantastic gains for this vehicle and we have a lot of experience with the brand as you can see from our videos. Here is a link to the gains for your vehicle. viezu.com/shop/land-rover-velar-2017-present/?attribute_fuel-type=Petrol&attribute_variant=2.0 Please do give us a call on 01789 774444 or email at [email protected] so we can look at getting you booked in. alternatively you can also book in online using the following link outlook.office365.com/book/[email protected]/

@@ViezuTechnologies awesome response the only thing is I’m located in Los Angeles California. Do you guys have a location in the USA Or have a location I can go here in the USA?

We sure do, we have a home tuning tool we can send you so you can load up your own tuning software - nice and easy! and we do have a number of dealers and installers in the US too - please drop us a mail to [email protected] and we will be happy to help and advise.

Yes most can be done via boot mode, if you want to send us engine and year to [email protected] we will be happy to confirm the exact listing for you.

Yes, depends which variant to be 100% but there is coverage from 2006 onwards.

For a slave it is £1514 + VAT and for Master it is £2698 + VAT. If you can let me know some contact details I would be happy to put a quote together and give you a call to answer any questions you may have. Oliver

@ViezuTechnologies thank you I only do few customer cars a year so to expensive to justify it. Thanks anyway

Understood, we do offer spread payments too, and tuning can be very profitable, you do not have to tune many cars to move into profit once you have purchased your tool. We are on hand to help if you have any further thoughts on it, best regards

Hi if you have kessV2 you can trade it in to a Kess3, either master of slave, if its a slave tool, this has to be completed by the current master, you can see more here : viezu.com/alientech-kess3/ please let us know if we can help with anything

the cost for remapping the D180 would work out to £249 + VAT for an inhouse tuning on the Range Rover Velar.

Essentially when you had the option of the stock file and the tuned file you would have the other three files there if provided/required. They are stored in the dashboard for the unit and you can then choose which one to load to the vehicle. Hope that helps.

@@ViezuTechnologies don’t you need to first indicate to your master which tunning you want him to do? Or he will make all 4 and you select

Most masters will have a process for submitting files, with instructions on how and where to send and what information they require, each master is individual in how they do this, so for the sake of this video we have focussed on how the tool its self works - you can see more here viezu.com/powergate/

Kess 3 account

Do you mean your existing Alientech account? In that case yes.

Thick Saffa accent made me laugh 😆

How is the master relationship managed? What happens to the decoder used in the Powergate 3?

Powergate 4 does not have a decoder, as a master you have your own master account online, where you can manage your devices and coding, the old PG3 decoder is not required, though can of course still be used with the PG3 units you have. viezu.com/powergate/