Пікірлер
@Road_Rage
@Road_Rage 10 күн бұрын
Personally. I'd put a V-Twin on the Rod-Barrow and use the Predator on a different project
@Iowa599
@Iowa599 15 күн бұрын
Why bother with an air filter? Just bolt on a velocity stack, the engine is disposable. During a HF special, the air filter kit will cost more than a replacement engine. Just get a couple. 20 years ago I built a kart with a real Honda 6.5, and even when the engines weren't cheap, the racing crowd was running only velocity stacks. So, the bell-mouth intake spacers were cheap & that's what I did. (1" thick alluminum donut to replace stock intake, works with stock carb studs after removing the plastic air filter housing)
@Iowa599
@Iowa599 15 күн бұрын
@1:42 I saw the can and I first thought, "whatever that is, (welding) spatter is going to make that taste nasty!" Then I saw it is a Miller Light...it's not getting worse, just different.
@ZacharyMilan
@ZacharyMilan 18 күн бұрын
Mini trike
@virgilkelley6235
@virgilkelley6235 Ай бұрын
Yes sir put it in
@jm351
@jm351 2 ай бұрын
One of the better wheel barrel builds I've seen.
@joeydepalmer4457
@joeydepalmer4457 2 ай бұрын
Love the colour
@johncooper9976
@johncooper9976 2 ай бұрын
Did you do a build video? If not, would you do a build video?
@arthurspillman4817
@arthurspillman4817 2 ай бұрын
Put it in that that cart is cool looking
@Mike-hr6jz
@Mike-hr6jz 3 ай бұрын
They make a little turbo pick up a couple more horses
@KING-FU
@KING-FU 3 ай бұрын
Surprisingly good / tasteful proportions on that build.
@corysobralski1611
@corysobralski1611 4 ай бұрын
What are the frame dimensions? Thinking about making one for my boy.
@TheRaineWitch
@TheRaineWitch 5 ай бұрын
Me when taco bell
@WyoCutlass71
@WyoCutlass71 7 ай бұрын
Where did you get the steering wheel?
@WyoCutlass71
@WyoCutlass71 6 ай бұрын
@@scrapmetalmafia haha I was hoping it was real!
@Dudeface167
@Dudeface167 8 ай бұрын
Put it in the wheelbarrow kart and make it dual engine
@lukeschuckenbrock5370
@lukeschuckenbrock5370 9 ай бұрын
With the governors still in, it should still have the same top end speed.
@socaldevin
@socaldevin 10 ай бұрын
Please show the conclusion of the corvette go kart. Even if, it’s only just pictures.
@socaldevin
@socaldevin 10 ай бұрын
What happened to part three?
@tinkerne-round4079
@tinkerne-round4079 Жыл бұрын
that would benefit from a grill (hoop) over the feet, both for looks and for safety.
@user-yn9ud9jl5x
@user-yn9ud9jl5x Жыл бұрын
What you charge to build me one
@decnijfkris3706
@decnijfkris3706 Жыл бұрын
Is 91 V enough?
@user-hc2po9us2d
@user-hc2po9us2d Жыл бұрын
How much do you want for it, or how much to build one
@pollyg562
@pollyg562 Жыл бұрын
go power sports is #1 for any parts they have everything
@joshgascon7087
@joshgascon7087 Жыл бұрын
Coolest mini rat rods I've ever seen! I was going to do a radio flyer cart, but the wheel barrow looks so good. 👍
@stratocaster1greg
@stratocaster1greg Жыл бұрын
I just put new strings on my 36 Dobro so I noticed the music. Super cool karts fellas! I raced Macs back in the day.
@lg09six94
@lg09six94 Жыл бұрын
I love the rods can’t wait to see you at another show keep them coming
@robdisco9287
@robdisco9287 Жыл бұрын
You tryna reach a bigger demo right? You want more people to see. share and enjoy your art right? If not then continue. If so then you don't have to get rid of your identity, you just have to not make it seem like your art is only for "a certain demographic" when the truth is "real recognize real no matter the art or the craft. I see real based family based thing you enjoy with your family and all based can get behind that as you see by how Bud light got that beautiful reminder of who controls who showcase and look what they tried to pander or showcase to? They tried to showcase the destruction of the American family. The response was utter destruction of a company that lost touch with what made them who they were... Family the Buch family who pioneered brewery and business. You never have to sacrifice identity or dignity to show your art. I notice a lot of Carolina blue you from N.C cause I am. I'm starting up a promotion thing where I go to certain demographics outside of mine and try to introduce that craft to another outside what the preferred intention weather its intentional or unintentional. But ill be in touch.
@Roxi_VR
@Roxi_VR Жыл бұрын
Yo i seen u at the rod runs I was behind you when you about hit the guy in the chair
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
😂 yeah I was messing with him lol
@jrw1670
@jrw1670 Жыл бұрын
Can put it in my hands I can put it on my go kart the one I got keeps shutting off in a turn or bump on me for some reason
@ralphchristianson
@ralphchristianson Жыл бұрын
One of the best sounds on the internet today.
@ralphchristianson
@ralphchristianson Жыл бұрын
Mc Gyver would be proud..goes pretty good.
@Baseballdamon
@Baseballdamon Жыл бұрын
Does 40mph
@DavidBrown-ur7wg
@DavidBrown-ur7wg Жыл бұрын
Butt Suudhd D D D Dmdjfjsjsjd Damn
@edwardhendersen5643
@edwardhendersen5643 Жыл бұрын
Beautiful 🥰
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
Thank you!
@decnijfkris3706
@decnijfkris3706 Жыл бұрын
is that one of those Briggs performance engines on it?
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
No, it's a Predatot 212cc. It looks weird because I remote mounted the tank lol
@decnijfkris3706
@decnijfkris3706 Жыл бұрын
@@scrapmetalmafia it looks ok
@shadystreess
@shadystreess Жыл бұрын
What size is your font tires and rims having a hard time finding something like yours for my build
@decnijfkris3706
@decnijfkris3706 Жыл бұрын
@@shadystreess Is 91V enough?
@nancybthescratcher6327
@nancybthescratcher6327 Жыл бұрын
New sub here. Great 👍 job
@bassobulat7939
@bassobulat7939 Жыл бұрын
🔥🔥🔥
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
Can’t wait to follow your future projects.
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
Man I really appreciate you helping me out can’t believe you went out of your way to help me thanks hope mine turns out just like yours that is why I asked so many questions.
@dewlaykinch9784
@dewlaykinch9784 24 күн бұрын
Clyde can you do a detail on the engine basket? I'd love to have a parts list for the axle and clutch set as well
@brentbennae6144
@brentbennae6144 Жыл бұрын
You gonna be up there tomorrow Or just the car?
@lg09six94
@lg09six94 Жыл бұрын
Saw the car at Knoxville expo senter today and I love the build keep it up👍
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
Do you remember off hand the distance between the front of frame to the step up in back of frame.
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
I'll have to measure it for you. I'll make another short for you when I get home with the layout
@B_leeadventure
@B_leeadventure Жыл бұрын
Oh my
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
How wide is your back live axle. And total length of your frame.
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
Thank you I want to build one of these it is awesome.
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
@@scrapmetalmafia That would be awesome I’ve built a few projects but not one of these.
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
@@scrapmetalmafia Thanks
@cjwyhs9601
@cjwyhs9601 Жыл бұрын
Y'all forgot to let the viewers know that all racing was done on a "Highway in Mexico". 🤣
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
🤣🤣 yeah that's my bad. I'll change the description lol
@Kuzify
@Kuzify Жыл бұрын
I thought y'all were speaking tennessean, then I saw your flag in the yard. Maryville boy here if you ever need a test dummy.
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
Not far from ya lol!
@dramecofarrior7079
@dramecofarrior7079 Жыл бұрын
Put it on the front of that one make it all wheel drive
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
That's an idea! Have to figure out steering.
@jameshamilton6808
@jameshamilton6808 Жыл бұрын
How did you get the tires white wall
@scrapmetalmafia
@scrapmetalmafia Жыл бұрын
Bonding primer and white spray paint. They won't last forever but easy touch up.