Where is the follow up? :(

what a pointless video. Main things you need to know like is the wiring the same and if not how do you get around it nor even mentioned. Basically a sales video for a labrcraft light.

What a waste of time. I wanted to see how it is fitted. Only the beard is shown properly.

I am in Oz . Can you share your wiring diagram?

Hi. How does the fixed antenna work compared with the pole mounted one? If it were possible would you opt for the mast type?

Nice work guys 👍 I was wondering how you removed the rear bumper to install the sensors, if you didn’t remove it, how did you know there was space behind where you drilled for sensors and wiring please?

Did you know there is a production fault for the centre speaker? Mercedes have a fix, two pins are incorrectly fitted, easy fix, saves disconnecting it!

Don't forget to mention a lot of vehicles have fairly low clearance and if you're going off-road this will just get ripped off buy the first rock

Very good

Hi, Great work guys. I hope your paying Martin very well that guy know’s his SH’t 👏😃👍

Great videos as always. What about a video on a campervan with a sliding door.? Lock?

Can you make this for a 40 foot motor home

Hello, I saw that your content quality and Thumbnail is also good. But, your channel is not Growing. Then, I analyzed and I saw that in your channel have some problems. That's why your channel is not growing. Mainly, you are not reaching to your targeted peoples, If you can solve these problems your channel will grow like a storm. Can I tell these problems? Can I tell here? Are you allow? And how are you? can I tell here? May be you want to know, or anyway!! If you can solve, channel will grow. Want to know? You can also generate sales ,by this

I love watching your videos. What DAB aerial do you fit to Fiat Ducato based motorhomes? As you know, the factory fitted aerial in the nearside mirror is rubbish! What's the solution for satisfactory DAB reception?

Auto-Sleeper Motorhome gets a Reversing Camera, Alpine Head Unit and Audio Upgrades! This Auto-Sleeper had an aftermarket High-Level Brake light Reversing Camera, an Alpine X903D-DU2 9" swivel navigation system, Audio Upgrades including sound deadening! Interested? Get in touch via our contact form on our website.

Standing! You’re STANDING there, he’s STANDING behind the camera.

Great team at Motorhome Retrofits, we are so pleased with our side steps and we recommend them to everyone we meet

Watch The Exciting Installation Of Pioneer Avic-Z1000D In Carthago C Tourer! Martin has installed a new head unit with Apple CarPlay, full-blown navigation and the ability to enter vehicle dimensions!

Does the amp supply amperage to the speakers as well? Or just the subwoofer? Thanks!

Excellent, thanks for sharing

Many thanks for the install guys, awesome job. Hope to see you again at a later date for further upgrades 😊

Hi, nice video ! Can you tell me witch radio frame you have used ? I have placed one in my camper and it does not fit because the round basel. Thank you !

Great job guys as always. Do you have any images of the fog lights when fitted?

Great Job! Where is the Button you used for turning it on from? I am interested in building one into my camper myself.

Can the LED headlights be retrofitted onto the earlier model?

Sorry but I'd be well miffed if it was my van and you had placed all the tools and dashboard etc on the unprotected seats

We have a new avtex tv when I plug in sky q box I don’t get any pictures? Any advice please.

Whilst fitting a similar rear view camera to a 2012 ducato camper van, I found an 8 pin connector tucked away behind the break light. After a bit of investigation, I found a corresponding identical plug behind the cab lighting unit. Although I couldn't get continuity between the two, I'm sure it would connect up if I had the means to switch it on at the ecu. This was in a factory built van, so I wasn't able to trace the wiring from back to front of the van, but I guess it is possible to use the existing wiring loom rather than spending time threading cable behind existing cabinets. 🤔

ware are you based

Hi there, I have I've of these units in my Ducato, but aren't receiving any dab radio, I've taken the unit out and they haven't connected the dab aerial into the DAB input using the standard connection. They have used an adaptor which splits the original cable into two and then connects to the left of the dab input!? Please can you explain why they have done this and maybe what I need to do to fix it. Thanks very much cheers Jules

Hi Just found you on KZfaq. Excellent videos. I have just watched the video where you take the Ducato dash apart and was wondering whether it is possible to replace the instrument cluster with the new digital one.

A revisit is on the cards now..

Hello Rich and Owen, I also have a reversing camera installed on a 2016 VW Crafter but I get no picture. How did you do the coding? I do have a VAGcom-hex-net device.

Thank you very much! Everything worked perfectly!

Holy smokes you guys know how to add a mark up!

You should have shown what it was like taken out of. Not enough information. Pitty because your videos are very good.

Like others, I found 1) using a tracer string useful 2. removing electric window button assembly essential! (Prize out from LHS of assembly) 3. Also (like comment by Moleontube) had to remove window blind as well as window trim - there is a blanking plate at top left. which hides a screw which once removed, allows complete window blind/ trim assembly to be lifted off a hook at the bottom left. 4. Also found single extra wire as well as main wiring loom when removing original mirror assembly. After demolishing the casing of the old mirror assembly, found this was a thin co-axial cable connected to the radio aerial which was installed on the inside casing. Managed to strip this out then install it behind the actual mirror assembly of the after market mirror which of course, did not have the aerial. All in all quite a job at the end of the day, however all working now! I mention these 'extras' to hopefully help others with the same job.

Great video and very helpful. One quick question - who do you use as the seller on Ebay please. I've just purchased one at £60, however I'm going to have to return it as the T40 screw holes don't align properly and when I present it to the body the angle of the mirror arm in its detent position is not the same as the existing fiat mirror and I can only just see down the side of the vehicle body even at full electrical adjustment. Its going back, but I'm hesitant to buy another unless it's of better quality

Still dont understand the apeal to have a built in navigation system in an era where there is so many good navigation systems on your phone already and apple carplay/android auto on any good head unit.

Excellent video, so many screws to find and remove really good to see how it is all put together, a question please, my 2010 Peugeot Boxer Autocruise has an alarm issue and the main alarm unit( Meta) is fitted to the bulkhead, how much further would I need to go to access the bulkhead and remove the unit for repair? Thank you

Brill video

Maybe a silly question, but when you turn it off, is it enough to just click or do you have to hold the off switch to turn it off?

Thanks! Exactly the instructions I needed to take off all that stuff

Need a reverse camera 📸 for a 2005 fait Ducato campervan please help thank you's

Brilliant video but my fiat ducato is 1998 different fitting and not electric on wind down. Please help

Where are you located Thankyou 👍🏻

HI great video and very helpful. Can you tell me when fixing the soundbar to the TV are the fixings included thanks

Hi, this was a really useful video, many thanks. Would it be possible to show how you remove the remaining dash parts to the right of the steering wheel, cheers

Very helpful video, i'm planning to put some switches near the wheel for the high beam i want to put and my rear lights, i'm sure it's pretty much the same on a left hand drive peugeot boxer, thanks a lot sir !

Nice.... vid, nice job