CM's Garage

Пікірлер

@LS1Cobra 3 күн бұрын

I had one of these back in the 80s. I didn't find it that difficult to start. No decompressor or anything. I wasn't a big guy back then probably 6' tall and only 165pounds. It was just more down to technique I think.

@franciscocastillopons1755 8 күн бұрын

Better cut the wire in a place where water can’t get to it

@bruceoslie6492 18 күн бұрын

Sorry, it's not a Super A. All Super A's have hydraulics. Good luck on the rebuild!

@CMSgarage96 18 күн бұрын

Yeah I quickly learned it was a 1945 A after getting it home. Checkout the rest of my videos. I got the tractor running and driving. Thanks!

@danparker1976 22 күн бұрын

Ever thought of using Klotz 2 stroke oil...i guarantee it wont smoke like that and it has a sweet smell.the only downside to it its red colored mix..ive used bel ray mc1,maxim,yamalube,hondas 2 stroke version and a slew of others..Klotz is the best

@CMSgarage96 22 күн бұрын

@@danparker1976 Good to know. I’d try it, but I sold the bike a while ago. I’ll keep it in mind for other 2 stoke applications. Typically the bike only smoked like that when cold. Soon as I got it warmed up and on the track it would mostly clear up. A slight trail of smoke is always good though. Thanks for watching!

@blakeerdmann 23 күн бұрын

Great description, and to the point. I think I'm missing the small plastic washers on mine that's why it continually goes off haha. Time to try to fix that.

@CMSgarage96 23 күн бұрын

@@blakeerdmann Thanks! Hope the video helps you fix it.

@richardpedersen9189 25 күн бұрын

Radio info ..... kzfaq.info/get/bejne/naxkebN82taWkoU.htmlsi=_CqSwETB8jNsG4HV

@richardpedersen9189 26 күн бұрын

LOOKS GREAT!!! 👍

@CMSgarage96 26 күн бұрын

@@richardpedersen9189 thanks!!

@richardpedersen9189 26 күн бұрын

Amber ... Not orange 😠

@kantatheepholsap2014 Ай бұрын

Rusted out to Restored.

@CMSgarage96 Ай бұрын

Thanks!

@ENGINERESCUE86 Ай бұрын

The patina on it is awesome

@CMSgarage96 Ай бұрын

Thanks! I had to delete my first video and release another one. My video formatting was screwed up on the first one. It was from the GoPro I think. 🤔

@ENGINERESCUE86 Ай бұрын

@@CMSgarage96 it happens!

@user-gj1jz7gn1i Ай бұрын

Www😂 de de de de Lim de de de de de de un km un@@CMSgarage96

@AntwanCarter-hp5zx Ай бұрын

What size chainsaw valve did you use?

@CMSgarage96 Ай бұрын

If you just get on eBay or Amazon and search chainsaw compression valve, a bunch will come up. They are a standard size. There is a video on KZfaq, the guy explains exactly what thread tap you’ll need to use for your head. I’ll see if I can find it, I’ll post a link.

@taruca2 Ай бұрын

Hola, yo cambié toda la manguera de goma por cañería de acero inoxidable hasta el motor, puse el filtro antes de la bomba de bencina, es más seguro por los incendios!

@CMSgarage96 Ай бұрын

That sounds like a good idea 👍 nice work. Thanks for watching!

@taruca2 Ай бұрын

@@CMSgarage96 kzfaq.info6OvTnbHXyG8?feature=shared

@taruca2 Ай бұрын

@@CMSgarage96 kzfaq.info/get/bejne/oJuiqLOau861YYE.htmlfeature=shared

@Litauen-yg9ut Ай бұрын

I think I have this same machine in the back shed. Never knew the year of it, but it sure looks like this one...

@CMSgarage96 Ай бұрын

Sounds good 👍 does yours run?

@Litauen-yg9ut Ай бұрын

@@CMSgarage96 Haven't tried it myself, the rewind is broke. Not seized, and the guy I bought it from said it did run, but was getting tempermental. He was using it at camp. Paid 50 bucks for it.

@cryptidpizza9096 Ай бұрын

Its crazy , the seat and wheels alone change that bike. Looks nice..

@CMSgarage96 Ай бұрын

It does make a difference for sure! 👍 Thank for watching!

@josuesalazar3603 Ай бұрын

How are portawalls working for you?

@CMSgarage96 Ай бұрын

They worked great! I ordered mine from portawallshop.com. Apparently they are the best ones. I don’t have them on the car anymore, because I converted my beetle in to a Herbie. When I did they were great.

@lawrencedow76 Ай бұрын

good job !!! @ 94 yrs old, next month, I now feel I can do the same. Thanx

@CMSgarage96 Ай бұрын

Thank you! Thanks for watching, I hope my video helps!

@CMSgarage96 Ай бұрын

94 years old too, wow! What year is your beetle?

@scotteverettterry3194 Ай бұрын

I have 3 of them love it

@CMSgarage96 Ай бұрын

Awesome! What years, all 82? I enjoyed restoring it. It was a blast to ride, what a beast!

@debrakaiser200 Ай бұрын

Thank you!💙

@CMSgarage96 Ай бұрын

You’re welcome!

@JFK-2939 Ай бұрын

That belt is wayyyy to loose!!

@CMSgarage96 Ай бұрын

I noticed, tightened it shortly after making the video, thanks.

@ocavant Ай бұрын

Huh. Never seen anyone backdate a fat chick. Anything is possible I guess. Just get rid of her big girl seats too. Why not just buy a '63?

@jg6579 Ай бұрын

I feel like an absolute arse! When I clicked on the first video I thought oh this will be good for a laugh. I've now gone back several times just because I was so amazed by how good your rattle can paint job came out. Amazing job.

@CMSgarage96 Ай бұрын

Thanks! It was a fun challenge! Spray paint quality has really improved over the years, that’s for sure. Using a flat base and then the clear coat helps too.

@geraldmonroe7885 2 ай бұрын

Nice video, didn’t take too long get the engine running

@CMSgarage96 2 ай бұрын

Thanks! Glad you liked it!

@ENGINERESCUE86 2 ай бұрын

That is the coolest! Nice work.

@CMSgarage96 2 ай бұрын

Thanks man!!

@ENGINERESCUE86 2 ай бұрын

@@CMSgarage96 np!

@Tracitracij 2 ай бұрын

Wow!! 🎉

@CMSgarage96 2 ай бұрын

Thanks!

@chainsaw_monday 2 ай бұрын

Great job. How many cans of exterior paint and clear did you use for the entire car?

@CMSgarage96 2 ай бұрын

Thanks! Oh gosh, I should have counted. I would say 15 cans of the white, maybe 10 cans of the clear. It definitely wasn’t cheap. You can buy the paint by the case, that’ll save on some cost. Probably about $400 in paint.

@iraforleiter7954 2 ай бұрын

It may be a "68" but nothing about that car (except the front seats) says "68."

@CMSgarage96 2 ай бұрын

You are very correct. The car started its life as a 1968. I converted the car to appear as an early 60’s beetle. Checkout some of my earlier videos, you can watch the whole process.

@lemonroe007 2 ай бұрын

🎉👏🎉👏

@CMSgarage96 2 ай бұрын

Thank you!

@jamessabastian6707 2 ай бұрын

So want its raining what you ar supposes to do its ok but rains it a problem 😕

@CMSgarage96 2 ай бұрын

Yep that would be a problem for a daily driver, in a rainy climate. I don’t drive my car in the rain, and It doesn’t rain much where I live.

@notajp 2 ай бұрын

Just because the clutch pedal is free, doesn’t mean the clutch disc isn’t rusted to the flywheel. That would be my concern. Especially if it has sat for several years. And yes, the one piece manifolds are separated internally. Actually, they wanted to use the hot exhaust to warm the intake air for better cold weather running. You have to remember the purpose of these engines. They weren’t designed for high performance. These are slow revving, low compression engines that were designed more for torque than HP. Oh, and the best way to clean those old cast iron carbs is with a baking soda or glass bead blaster.

@CMSgarage96 2 ай бұрын

Thanks for the information! Seems like the clutch is functioning and doing its job. When the clutch pedal is pressed the gears in the transmission stop turning.

@p52893 2 ай бұрын

Oil your gaskets

@CMSgarage96 2 ай бұрын

On the magneto?

@ENGINERESCUE86 2 ай бұрын

Nice job!

@CMSgarage96 2 ай бұрын

Thanks buddy!

@ENGINERESCUE86 2 ай бұрын

@cmcamaro96 I can't wait to see that beast move under its own power!

@CMSgarage96 2 ай бұрын

@@ENGINERESCUE86 that’ll be soon for sure 👍

@Tracitracij 2 ай бұрын

❤

@403patriot3 2 ай бұрын

If building a 97 performer right now, I’m halfway through and just waiting for parts in the mail. These 95-97 style gt’s and dyno’s are my absolute favourite…I was 15-17 then, so many memories. I went with 6 spoke tuffs, too!! I got the LAST set of green 6 spoke tuffs available…I’m glad I don’t see many in 6, even though they LOOK way better. Nice wheels, bro…cheers from the home of helltrack, NW Calgary Alberta 🤙🏻

@CMSgarage96 2 ай бұрын

Your build sounds awesome! There is nothing as cool as the old school 80’s - 90’s BMX. Thanks for telling me about your bike, and thanks for watching!

@CMSgarage96 2 ай бұрын

Helltrack! Loved the movie RAD when I was a kid!

@mexman000 2 ай бұрын

that looks like a big sprocket. what size is that? i have this same frame, and i wanted to do a build. I was looking at 28t sprocket

@CMSgarage96 2 ай бұрын

Cool! 28T is too small. For the classic 80s 90s BMX look you want a 43T

@CMSgarage96 2 ай бұрын

Or 44T

@Thomzombie303 2 ай бұрын

just noticed you didnt take the body off the pan, that just for ease of install?

@CMSgarage96 2 ай бұрын

Oh yeah, it’s much easier. Thanks for watching.

@Thomzombie303 2 ай бұрын

great job buddy, im about to tear down my 66 bug, replace the pans and both lower door pilars, hopefully the metal work will be minimal :) Looking forward to your other videos

@CMSgarage96 2 ай бұрын

Thanks! Good luck with your 66. Hope you enjoy the other videos. Thanks again for watching!

@infotechelectronix9300 2 ай бұрын

that is not herbie its 1963 herbie was made

@CMSgarage96 2 ай бұрын

It’s about time somebody filled me in. Thank you so much for enlightening me on that fact.

@CMSgarage96 2 ай бұрын

Is this a question or a statement?

@ENGINERESCUE86 2 ай бұрын

I'm excited to hear this beast run!

@CMSgarage96 2 ай бұрын

Thanks, me too! Hopefully in my next video!

@ENGINERESCUE86 2 ай бұрын

@@CMSgarage96 are you going to restore it?

@CMSgarage96 2 ай бұрын

@@ENGINERESCUE86I’ll probably just get it running, clean it up, and paint it the original red. More of a refurbish.

@ovalwingnut 2 ай бұрын

Like I told my last 3rd date; "nice rack". Flattery will get you where you need to go :) Character & Utility. All the years I've had bugs but never one with a Roof Rack. But I've had many a struggle with trying to wedge over sized items in the back seat.That was a pretty "outstanding" Chinese packing job. I wish I could get that level of care from eBay sellers :O\ p.s. It's so funny that you can't get a plastic bag at a grocery store if your life depended on it yet we are all inundated with a plastic extravaganza in every other aspect of our lives - go figure Cheers!

@CMSgarage96 2 ай бұрын

Thanks 😂

@ovalwingnut 2 ай бұрын

Smoothy Rings? I've never heard of these and I'm old and know stuff That was really creative. From my EZ chair & 12" monitor I would have a hard time telling you the difference. You did a outstanding job. In fact, you R the "Classic VW Conversion Whisperer". Just saying. Cheers from So.Ca.USA 3rd House On the Left.

@CMSgarage96 2 ай бұрын

Thank you! Thanks for watching too!

@jerrypina4093 2 ай бұрын

Very nice, car looks good 👍

@CMSgarage96 2 ай бұрын

Thanks!

@johnnylightning5633 3 ай бұрын

Nice job and great parts list with instruction on how to do "old school buildin" RIGHT!!!. Luv It!!!

@CMSgarage96 3 ай бұрын

Thanks! Glad to hear the video is helpful!

@maiaradelima7324 3 ай бұрын

I backdated my 69 dash to the earlier ones as well wanted to know where you found the radio cover and the process for adding the chrome molding trim too! Thanks buddy!

@CMSgarage96 3 ай бұрын

The radio block off plate I found on eBay. The block off plate comes with its chrome trim that has pre-drilled holes. The rest of the dashes chrome trim is a kit from J-Bugs.com. I had to drill my own holes in the dash for the trim clips. Just find the center up and down on the dash, measure twice and drill with a metal step bit. Side to side doesn’t matter too much because the clips slide behind the trim. I probably should have made a video on that too. Good luck with it! Thanks for watching!

@ProjectRescues 3 ай бұрын

What size are the bolts needed to bolt the standoffs on? I have my original hardware and standoffs, but dont have the hardware thats suppose to come with it, was just gonna get some bolts from hardware store, but what size are the bolts?

@CMSgarage96 3 ай бұрын

10mm Head - 6mm X 1.0 thread