Walcom spray gun Carbonio

Пікірлер

@MilosPokimica 22 күн бұрын

is there too much difference between 1.2mp and 1.3mp

@Walcomspraygun 21 күн бұрын

Not much you can close the flow a little bit on the 1.3 , usually 4,5

@allanfourie6874 Ай бұрын

Are the Parts available on the Spraygun?

@allanfourie6874 Ай бұрын

I will have to get myself one, when im Big one day. ❤️😁

@paulhopkins1905 Ай бұрын

Conventional still gives a better finish and uses far less air

@RoksAutorefinish Ай бұрын

Can you help me in this

@RoksAutorefinish Ай бұрын

I want to make the automotive refinish training center in Pakistan

@RoksAutorefinish Ай бұрын

My name is Robin Christian from Pakistan

@RoksAutorefinish Ай бұрын

Wow amazing filters

@dylanpulvermacher9970 Ай бұрын

Can i demo one?

@Walcomspraygun Ай бұрын

Hi, yu can get one www.walcom.shop and 14 days return policy

@blademan4043 Ай бұрын

Is this light explosion proof certified UL-844?

@Walcomspraygun Ай бұрын

Is Atex, the equivalent of UL in Italy

@ali-sleimanchehade6129 2 ай бұрын

I’m really like the 360 light do you have for the mini spray gun?

@Walcomspraygun 2 ай бұрын

Yes it's included with the 5 different orange rubber adapter

@ali-sleimanchehade6129 2 ай бұрын

@@Walcomspraygun amazing do you have a store in the US? I live in Ivory Coast (Africa) and there is a guy that can ship it to me to ivory coast. And btw I send you guys a message on messenger some questions but still didn’t get any reply need help for choosing the right product for hydrodipping!

@Walcomspraygun 2 ай бұрын

@@ali-sleimanchehade6129 www.walcom.shop

@ali-sleimanchehade6129 2 ай бұрын

@@Walcomspraygun thank youu 🙏🙏🙏

@outdoor_lifestyle_0149 2 ай бұрын

That scotchbrite trick with the needle was pretty cool!

@jocblues 2 ай бұрын

What models do you recommend for painting furniture? Thanks

@lztetrax 2 ай бұрын

Genesi carbonio base HALO clear

@graemerichmond1425 3 ай бұрын

This is awesome next level stuff guys!

@Walcomspraygun 3 ай бұрын

thanks

@G35149 3 ай бұрын

Walcom is my go-to clear gun, high pressure equals good results.

@reygomez323 3 ай бұрын

Which one would work best for candy paints,halo or evo,aldo 1.2, or 1.3,getting ready to purchase

@reygomez323 3 ай бұрын

Which one would work best for candy paints,halo or evo,aldo 1.2, or 1.3

@user-uw4he1yj3y 4 ай бұрын

до этого ролика,я снимал воздушное кольцо шилом ))))

@Thescratchmaster2017 5 ай бұрын

youtube.com/@Thescratchmaster2017?si=0s4ViAek8AffYhUX

@reynaldodosantogh8140 5 ай бұрын

From Peru! 🇵🇪🙏👋👋

@jeremyoetken2094 5 ай бұрын

I can not get this air valve part for my walcom carbonio spray guns in the USA. I have contacted Walcom USA and bonding solutions. They said they can not help me. How can i get this part?

@user-hy2rg7zl9f 5 ай бұрын

Hi) What is the difference between HALO and HTE?

@lztetrax 5 ай бұрын

Same spray gun , just rename it but Evo is improved version of light

@jonfer8553 5 ай бұрын

Saludos desde Ecuador compre una walcom ego 190 HALO puedo aplicar base agua o solvente o solamente es para clear ayuda xfavor

@lztetrax 5 ай бұрын

Para base e para clear but the best set up is one separate for base and one for clear to avoid contamination

@user-bp8sq7xm2p 6 ай бұрын

WELKOM CLEAR 1,2?1,4?😊

@jr_slot 7 ай бұрын

So i just bought the halo clear gun..can the mp cap be changed on it? Does it make a difference. I use glasurit clears and what is good settings for this gun? I just got the evo base gun and i love it

@Walcomspraygun 7 ай бұрын

Hi, yes you can use the mp air cap and yes it makes a difference if you like a super flat finish . Thanks for the feedback, usually clear does well at 29psi , let us know which one specifically or you can find spraygun chart www.walmec.com

@official2detail 4 ай бұрын

so the evo its not good im lost?

@official2detail 4 ай бұрын

i have the genesi 360 evo hte 😢

@official2detail 4 ай бұрын

can i buy the halo air cap for my evo?

@Walcomspraygun 4 ай бұрын

Evo is good , is the latest model and halo is just a rebranded of hte, same spray gun@@official2detail

@jr_slot 7 ай бұрын

I just ordered a halo clear gun..can the mp aircap go on that gun?

@Walcomspraygun 7 ай бұрын

Yes

@user-bp8sq7xm2p 7 ай бұрын

Где купить .?

@MrMelvinkennedy1 7 ай бұрын

Bought mine brand new 2 months ago. Dropped it once while on charger and now red buttons broke making it extremely difficult to turn on and off. Honestly expected better from a $400 light

@Walcomspraygun 7 ай бұрын

Even if you buy an iPhone and you drop other without case , you may end up paying for the repair. It depends also from the impact but still we want to take care of our customers, please email [email protected] , we will offer a special deal on replacement one

@enriqueestrada7534 7 ай бұрын

Thank you!! Had multiple air guns bubbling. This this to all of them and sure enough it was fixed!

@user-sy8tl8cq2o 7 ай бұрын

У меня такая проблема была с таким же пистолетом,мыл промывал и обдувал,и всё напрасно,в итоге поставил его в угол,купил такой же новый,хотя и тот тоже новый,дёргался факел,но завтра попробую,может не дотягивал сопло))

@drewrinker2071 7 ай бұрын

Thank you so much, I had no idea why my guns were doing this

@FlakeBoss 7 ай бұрын

I have the luma iii aurora 2 gun light. This light looks interesting, could you send me one to do a comparison review video? I have to warn you though I will be brutally honest about the product. Thanks. :)

@Walcomspraygun 7 ай бұрын

Thanks for your message, honestly we tested both and there are technical details that makes quite a gap between these two models, send us an email for a special deal if you like to

@FlakeBoss 7 ай бұрын

Thanks, I will do that. :)

@FlakeBoss 7 ай бұрын

I sent an email to you guys November 13th and still haven't gotten a reply. I look forward to comparing this light with my luma III

@stoyankartev8075 8 ай бұрын

Hı mate how much litres pressure in minutes?

@Walcomspraygun 7 ай бұрын

350 l/min depending on air pressure

@superjosemota1 8 ай бұрын

ultra clean

@garagepnkoof284 8 ай бұрын

Дюзу надо откручивать с нажатым курком

@romankepka1062 8 ай бұрын

ахахха, иглу уже достали!!

@superjosemota1 8 ай бұрын

Genial producto

@user-db8tq1ow2m 8 ай бұрын

Отличное видео. И отличный пистолет. Приобрёл такой 1.4 hte. Только приятные впечатления. Спасибо walcom за доступную цену и достойное качество. Привет из Республики Беларусь.

@garagepnkoof284 8 ай бұрын

Как купить?

@superjosemota1 8 ай бұрын

Me escanta esa aplicación de la carbonio

@user-pg4ke1hq4w 8 ай бұрын

👍👍👍

@willymax4384 8 ай бұрын

Top esse video me salvou kk

@matthewwoolf8039 8 ай бұрын

Which gun is best for clear coat and which gun is best for solvent base coat?

@Walcomspraygun 8 ай бұрын

Genesi carbonio halo (hte) 1.2 base and carbonio 1.2mp clear

@rajivsewnandan4865 9 ай бұрын

Is the halo technology in the aircap or in the gun and if its just the aircap , will the halo aircaps fit on my carbonio's?

@Walcomspraygun 9 ай бұрын

HALO is the new brand for previous HTE, if you have the latest EVO you have all the upgrades already

@superjosemota1 9 ай бұрын

Cuando salen a venta las ando esperando con ansias 🎉

@superjosemota1 9 ай бұрын

The truth is that they are e unxcellent products that are used in Venezuela based on solvents and are a marvel of high efficiency in all jobs.

@user-ul7ik2jq7q 7 ай бұрын

Ты что написал? Читал вообще?

@maxmeyer74 9 ай бұрын

Exactly what is the difference in the halo to the standard carbonio genesis evo guns?

@Walcomspraygun 9 ай бұрын

It's the new brand for the hte evo, technically the same we anted to better explain the technology

@superjosemota1 9 ай бұрын

@@WalcomspraygunThe difference is better efficiency in the transparent finishes uhs hs is wonderful my tutor norber Alonso representative of walcom

@user-ul7ik2jq7q 7 ай бұрын

@@Walcomspraygun заказал такой посмотрим ,что за инструмент. А то маркетологи врут и не краснеют .

@leon.andrade 9 ай бұрын

Es la regulación perfecta! Gracias 🙏🏻

@mrcorollaVA1 Жыл бұрын

Looks good, would you send it to me so I could do a video review of it for my Chanel? I would send back in a week, saves me the headache of tracking it down. I have lots of color matching lights, from the Milwaukee , sun gun, and luma3 , I'm thinking of doing a comparison video on them. Thanks!

@Walcomspraygun 11 ай бұрын

Send us an email

@Mullins_2010 Жыл бұрын

One of my digital gauges when i turn on is consistently showing pressure even when disconnected is there a fix

@Walcomspraygun Жыл бұрын

Did you try this reset procedure?

@Mullins_2010 Жыл бұрын

@@Walcomspraygun yeah it resets to zero then starts climbing back up and then just stays. Sometimes it will just jump all over the place

@demonico123456789 4 ай бұрын

Maximum pressure for gun is 5bar. This one is on 5.55 that can damage the gun or digital gauge.

Ең жақсы KZfaq

Пікірлер