nice ! Which software do you use to control it ? FlyPT, SimHub ? Thanks
@LionSandwich22 күн бұрын
@@RicardoPereira-mx7lm custom python code to Thanos4u serial FTDI controller
@ItsTinkleryallАй бұрын
Ok but why are you using a GT wheel instead of a dish for oval racing?
@tronicgrАй бұрын
I think the reduction gearbox addition was too much... 😄
@LionSandwichАй бұрын
PLA isn't working. Will need to reprint parts in Nylon or PTCG.
@cj09beiraАй бұрын
@@LionSandwich or not plastic
@tronicgrАй бұрын
That literally backfired... 😅
@keegn5040Ай бұрын
That setups wild
@FULLNinja69Ай бұрын
Thanks for the video. Did you ever solve the issue? I looked through your videos but did not see a continuation.
@LionSandwichАй бұрын
Ha. Nope. I sold all my VR gear and went triples. I like them better.
@tronicgr2 ай бұрын
So what happened? Why it went haywire? No soft limits?
@LionSandwich2 ай бұрын
ha don't panic. It wasn't thanos4u related. My dumbass forgot about the chair behind the rig. Simple wedge...but I also had some error in the python code for braking which did glitch out and throw crazy movement commands.
@tronicgr2 ай бұрын
How did you manage to get it through the wall? 😮
@NisiaFreitas2 ай бұрын
Passa esquema pra mim montar um
@mpagit2 ай бұрын
Can't wait until they affix slot cars with small cameras and let you race in real-time with the view as if you were sitting in the driver's seat of the slot car. Add in a feedback rig like this, and it would almost feel like you're at the Indy 500
@LionSandwich2 ай бұрын
💡
@fullcircle61072 ай бұрын
Cool rig, how much does it cost ? Looks sick
@ElectricEmpireProductions2 ай бұрын
Monster truck 🤟🏼
@APPR8VXD2 ай бұрын
Sick rig…but fanatec for real??
@LionSandwich2 ай бұрын
I've never had a problem. DD1
@NisiaFreitas2 ай бұрын
Passa esquema pra mim montar um
@warlockostia2 ай бұрын
and ofc u should use a meta quest 3 with this setup
@LionSandwich2 ай бұрын
Would be dope
@denrenvavanaardt69892 ай бұрын
Can understand for collision but does the slow forwards movement actually feel like acceleration and deceleration
@LionSandwich2 ай бұрын
Yes. Tuning is still happening. It's just enough cue to let you know what the car is doing. That's the goal of the sim. Not meant to be a carnival ride.
@denrenvavanaardt69892 ай бұрын
@@LionSandwich yeah I understand, I also use shakers etc, not meant to shake the soul out of your body Just let you know what's going on, I just wasn't sure if you'd "feel' the slow movement, sick setup tho
@kainpwnsu2 ай бұрын
Watching the head rising on that can is the most tension I've felt all week!
@LionSandwich2 ай бұрын
lol never noticed that
@kainpwnsu2 ай бұрын
I like the fans!
@LionSandwich2 ай бұрын
5volt usb
@bombtrak152 ай бұрын
I wanna see a split screen with this and the game
@LionSandwich2 ай бұрын
Idea man over here, nice
@Vayowin2 ай бұрын
N64 Mario cart
@nicklancer18342 ай бұрын
How the power bill with something like this?
@LionSandwich2 ай бұрын
Horrible. 😂 it's about 4000 watts all powered up
@cor77402 ай бұрын
@@LionSandwich 4000?? what kind of motors are you running? nema 32s?
@LionSandwich2 ай бұрын
@cor7740 750watt, and 7 50 watt shakers + 1000 watt pc
@nicklancer18342 ай бұрын
@@LionSandwich Jesus 😂 I'd love to see something like this. But combined when you see those rigs that have dashboards and gauge clusters and stuff.
@shlak2 ай бұрын
@@LionSandwich 1000 watt PC!? what on earth is the specs
@duderguy15712 ай бұрын
Hook it up with #cloudrc
@DCSWarriors2 ай бұрын
Team broke 👇
@LionSandwich2 ай бұрын
Dibs on captain
@bruhbruh-fn4pj2 ай бұрын
How much if i may ask?
@LionSandwich2 ай бұрын
I haven't tracked. Custom built slowly over 2 years.
@phunlezz2 ай бұрын
...of course :)
@mr.weirdo57562 ай бұрын
Better not flip.
@Zeddicus_Zorander2 ай бұрын
Poor wood floor
@LionSandwich2 ай бұрын
Cheap ass bamboo
@ModdexNL2 ай бұрын
Want to see a rally going on the rig that would be sick
@LionSandwich2 ай бұрын
🤔best idea ever
@AliHabeb2 ай бұрын
is the logitech g923 a good starter wheel?
@LionSandwich2 ай бұрын
Yes sir. Totally reliable.
@max_wav2 ай бұрын
Yup, I used to have one. Very good, pairs well.
@WungoBungo2 ай бұрын
IME no it breaks after about 6 months to a year especially if drifting. Go for moza
@zsazsa1234562 ай бұрын
Barefoot is wild
@ty1942 ай бұрын
😷🤮
@chadfischer88062 ай бұрын
Want.
@bear_witness2 ай бұрын
The forward movement is interesting to simulate g force, but not practical to stay accelerated. You would have to stay on brakes and let it reset to the beginning?
@LionSandwich2 ай бұрын
Eventually, the code will wash back to neutral at an imperceptible rate. So yes. You got it. The motion seen is actually the difference of acceleration. Therefore under constant acceleration nothing happens, that's as best you're gonna get with a static system.
@waqaspathan33372 ай бұрын
I’m only commenting for the good music choice, I have no idea what’s going on
@relentless95782 ай бұрын
😂
@RustyInventions-wz6ir2 ай бұрын
Just found your channel and subscribed. Very nice work
@COBRACUSTOMS3 ай бұрын
where i can download it ?
@ToastyAF4203 ай бұрын
unplug it and plug it back in
@MaverickMcKenna3 ай бұрын
fanatec my ass bro thats the wheel i have bro its a GSI brother
@LionSandwich3 ай бұрын
GSI with fanatec podium hub, best wheel ever
@SIMRIG4123 ай бұрын
All this and using fanatec that is a huge mistake! Switch wheelbase company and avoid there headache
@LionSandwich3 ай бұрын
What do you run?
@SIMRIG4123 ай бұрын
This is a big mess and a waste of floor space for motion 😂
@LionSandwich3 ай бұрын
Thank you for the compliment 😅
@serge9333 ай бұрын
This looks exactly like what it would look like if you had FFB reversed or inverted, check your settings on this in fanalab and the game side
@F1Aviation-vy1bw3 ай бұрын
did you try plugging the usb directly into the pc?
@LionSandwich3 ай бұрын
Will try thanks for the tip
@user-lq6vm8yt4h3 ай бұрын
How long did you have it
@LionSandwich3 ай бұрын
2 years
@user-lq6vm8yt4h3 ай бұрын
@@LionSandwich thats a short period for it to be broken like that you pay way to much for stuff like this and it ends up like this after only 2 years is kinda crazy
@LionSandwich3 ай бұрын
@@user-lq6vm8yt4h re flashing firmware tonight...
@user-lq6vm8yt4h3 ай бұрын
@@LionSandwich good luck with that then . been looking around at DD wheels so far what ive seen of them i dont like very much im currently on a G29 that needs replacing after 7 years everything on that is starting to wear out a bit its mainly the buttens that stop working the steering and pedals are fine but i think im just going to get another logitec wheel their praticly unbrakeble its plug in a play cheaper and the setup that i have isnt at all ready for a DD wheel so i would need to either build or buy a frame for me thats to much work for like just GT7 , i dont play much else on it so i figured that new g923 might do just what i need and not a single bit more
@LionSandwich3 ай бұрын
@user-lq6vm8yt4h they're some good arguments for why direct drive makes you slower also. On oval I use the bare minimum force feedback to limit unnecessary wheel movement and jittering that causes tire wear.
@catman55463 ай бұрын
A clean shop is a sign of complete insanity!!😂😂😁😁
@S.JCarpentry3 ай бұрын
I love walking into a clean shop. It's doesn't stay that way for long though
@benhawke72313 ай бұрын
How the FûQ did that happen??? 😮🥃🍻🇺🇸
@TheQuintessentialOne3 ай бұрын
Srt 9.1?
@LionSandwich3 ай бұрын
Not sure what you're asking?
@TheQuintessentialOne3 ай бұрын
@@LionSandwich you mentioned getting a new shifter that was H/Seq, I was taking a guess at maybe you going with the SRT 9.1 from Lebois
@LionSandwich3 ай бұрын
@@TheQuintessentialOne ah, wasn't aware of that one. I'll give it a look. Thanks!
@RK-kn1ud3 ай бұрын
Has never happened in the wild...man says "butt" 5 times for no reason.
@LionSandwich3 ай бұрын
Thank you for your algorithm contribution
@troyhartracing013 ай бұрын
Get a full wheel for ovals
@LionSandwich3 ай бұрын
I'm accepting donations.
@3Dmanni3 ай бұрын
Came for the dope rig, stayed for the Rage.
@LionSandwich3 ай бұрын
lights out
@ryanedwards13803 ай бұрын
Guerilla Radio! @@LionSandwich
@WickStick7773 ай бұрын
this shit is so sexy
@RK-kn1ud3 ай бұрын
Your ball/socket could probably benefit from a little lubrication. Looks dry in the video. Maybe a very light coating of silicone paste. Lithium grease may work, but no guarantee its safe for ABS. YMWV.
@LionSandwich3 ай бұрын
Algorithm contribution noted
@tronicgr3 ай бұрын
You are welcome. I'm using the 90-ST motor on my belt tensioner and it uses transfer belt as on your previous video, to double the gearing to (1:2 ) for torque output about 5Nm... I should make a description video sometime to explain how it works better 👍
@LionSandwich3 ай бұрын
Good to know 5nm is your end torque. Just guessing from this setup it felt like 5nm would be best.
@tronicgr3 ай бұрын
Why not just use larger servomotor with more direct torque? The gearbox is pain as it translates into position more than torque, plus you stress the belt as you mentioned...
@LionSandwich3 ай бұрын
🤔good point, trying to get this going with what I have on hand. Looks like a more powerful servo is the best solution.
@LionSandwich3 ай бұрын
Followed you're advice with making it direct drive.