Hola, me podrías decir porque el programa sigue prendiendo una y otra vez? Tengo que apagarlo para que deje de regar 😢

I have a RainBird ESP-TM2 with a Irritol rain sensor on the roof. It has just rained, not a lot, just a 2-3 hour rain. The sensor is shining red. Is that normal?

Error message FUS ?

I can’t get my clock to go to am

Can I set individual zones for separate days? I can't reset it. And so far nobody has discussed this. I'm still searching KZfaq

I set it to off but sprinklers keep going

Bravo! Helpful video...just what I needed.

Hola tengo un sistema de riego con un control RD1200 ext. quiero instalarle un wireless rain sensor modelo RS1000. Pero el control RD1200 no tiene el arnés o puerto del sensor , solo viene el espacio vacío, con dos puntos donde debería venir el conector y poder atornillar los cables marrón y blanco. Como lo. Puedo conectar ?

This did not work to turn mine off.

All of my station run times are set to the same area (station 1) of my yard. How can I set stations to different valves around my yard?

Thanks that was the best instructional video I've seen on this unit.

‘Talk to me like I’m a 5th Grader’ thank you!! This was super helpful, covered all my questions and was easy (even for me) to understand!!

Life saver 🙏

Very clear instructions, no music, not holding camera in one hand, and right to the point. Great video!!!!

Need info on troubleshooting

I just installed a new lawn. How can I water the new lawn 3x's/day and the other zones just 1x/day?

Awesome I learnt everything I needed to know, thankyou mate

My Kwikdial kd6 has fuse issue. It shows 1,3 FUSE on the display. Nothing is working. What do you think the issue?

Not helpful at all. Going very fast over the functions and does not explain the details.

Too easy with this video! Thank you!

So if I went through and set the days and times I need. I set it on auto for it to run what I set. Not on manual programs?

3 min of commercials and it only shows the obvious. Didn't answer the questions I had .

Build quality looks worse than a Hunter product....

After following the procedure in the manual I still had trouble synchronizing a new transmitter. What you showed me is that it is necessary to hold down the "smart bypass" button longer than the manual showed. By the way, the sensor currently sold looks different than the one you are showing, but the receiver looks the same. The beginning of your video says "for professionals only", I hope I don't get in trouble, I'm not a professional. Thanks for making the video.

Bien gracias

How do we use programs “B” and “C”? I have my Rain Dial-R set for regular watering, but now I have over-seeded my lawn and need to water just the lawn three times a day for at least two weeks. I don’t care about watering the rest of the yard during this time. I thought I might be able to keep “Program A”, as my regular program, use “Program B” for this temporary water schedule, and then just switch back to program “A” when I was ready. Each time I try it, “Program A” changes to the same schedule I set for “Program B”. What am I doing wrong?

Seriously, thank you... because you posted this I was able to learn how to use the system and find a big leak in one of the underground pipes.

Great video. I see in the comments that some people are having the same problem I have with my device of it not going to AM. Older versions of this device will indicate AM by putting a vertical line under the P in pm thus changing the P to an A. The AM/PM indicator is so small it is difficult see this subtle change. THIS AM/PM INDICATOR IN OLDER VERSIONS IS A BAD DESIGN CHOICE. Irritrol apparently wised up on the version we see in the video. If you deal with the older version of this device I suggest you get a magnifying glass or use the magnifier app on your phone to see the change. The first time I used this unit the sprinklers went off at 3pm and not 3am.

It wasn't working and was out of sync for several months until I noticed it. I had no clue how to fix this as my previous owners left no note or manual. Your video helped & was so simple and explained well. Thank you very much.

You are the best - I can finally program this controller. Thank you so much.

System works on manual. Timer set to correct time. When time is reached nothing happens. Any thoughts please?

Thank you sir

I have a RD1200-EXT and only have 9 valves and if I need a new box can I go down to a 9 valve box instead or will the wiring coming up already existing not be compatible and the 9 valve box looks to be different voltage than the 1200? Also I see now there are new boxes that can work with your phone or alexa? Not sure what to order to replace my old RD1200-EXT?

Like and loved your this video. Made my life much easier. I was struggling a lot. You explained Every step is in details , easy to understand .plus you didn’t miss any step the one we needed to know. Thanks million times 🙏🙏🙏

how is it completely turned off short of plugging the hole?

Our Rain dial defaults to 10 minutes for everything every time there’s a Power Outage. How do I prevent this?

I had to unplug a customer's system and wanted to set the time before I left. Thanks for the video if you're still alive.

If I set the dial on "Odd/Even" will the sprinklers run every other day?

Thank you so much! Moved into a house with this system! No instruction manual! You’re the best!

Can CL-M1 be used with Orbit b-Hyve irrigation controller and other such controllers?

Can I set the unit to water at night? Ideally, want to start at 8 PM but can't get the clock to go beyond 6 PM - ?????

great way to fix. but what if my sprinklers are underground? removing the caps to wash it out will put dirt in the line. think it's good if I blow it out?

Thank you! ❤️

its still on for me too

This was SO HELPFUL and EASILY explained. Considering how little I actually have to mess with this thing, it's hard to commit to memory what to do when you need to reset it for some reason.

I have a dumb question . why are we screening the water before watering the grass? why not let the debris shoot out the hole? You're going to have to clean something if it gets clogged so why not just take your fingernail to the tip of the sprinkler and move it back and forth through the slat instead of having to take it apart. clean the screen, put the screen back and then wash the tip too. probably maybe. idk call me stupid , But I always just take the screen out because they're annoying. I don't get clogged sprinklers once I've done this.. lol And if I do it's just the tip because of the weed eater. I don't tend to have dirt coming through my lines. just wondering why every manufacturer waste the cost for a screen? 😳 personally, the only time I've had a clogged sprinkler when I've first replaced it. then I remove the screen and I'm done.. haha true story .

Where do you get a replacement Irritrol SD Meteo card? Can you format a regular SD card and add weather data to use instead?

My system keeps turning on in the middle of the night and runs for hours…. Even though it is not programmed to do so.

Can this system be set for every third day?

Great instructional video. You should consider doing other set-up videos of other products.🤙