Why my linking feature is not visible for the third channel. I have connected my SM7b to channel 1. On channel 1 I am able to see the linking option, but not on Channel 3. Please suggest
@sounddev2 күн бұрын
Hi there, what MixPre unit do you have?
@t993312 күн бұрын
This setup is absolutely baffling
@just.decide_platforms.21 күн бұрын
How to send the sound signal from sound recorder like sound device mixpre 10 to the cameras wireless not by cables?
@sounddev16 күн бұрын
Hi there, please contact our support team with your question. service.sounddevices.com/contact-support/
@dickharper21 күн бұрын
How much will you be overcharging to service this turd?
@user-fm2yk1rw2c22 күн бұрын
Soon wireless receiver and mixers will be combined.
@hitf522 күн бұрын
All we need now is a 2U SuperNexus Plus!🤣
@samwallflower787525 күн бұрын
I am very interested in this device. But I would like to wait for Gen 3. Since the mix pre gen ii is at least 3 to 4 years old at this point. Anything in the works? Thanks.
@tatv231626 күн бұрын
having the solo button next to the mute button seems like suicide in a live situation. one slip with the finger and the sound will be muted on the recording? hope there are other ways of soloing than this one..
@tatv231626 күн бұрын
amazing video!! please upload hd / 4k version to see well the details!
@tudorgheorghe4532Ай бұрын
Quick disclaimer! In this subnet.Can i or is a must to have booth virtual and controler into macLaptop?
@sounddevАй бұрын
To route into your computer, you'll need a license for Dante Virtual Soundcard and Dante Controller,
@willowtandy9162Ай бұрын
The only functionality wanted is preamp gain. No use for it otherwise
@creativegreatsvisualsАй бұрын
the mixpre 10 ii has line Level outputs , the mixpre 6ii does not , the canon c70 has line level outputs but in so how do I get line level synched audio with the mixpre 6ii plugged into the canon c70. im not refering to recording separate audio , i want to synch the audio with canon c70 camera .
@sounddevАй бұрын
If you have a MixPre-6 II, I would recommend recording the audio separately as you will lower the quality of the recording by relying in your Canon C70's preamp. The MixPre-6 II offers a 3.5mm TRS Stereo Output which you could run into the stereo input of the C70. I wouldn't bother running a 3.5mm TRS to XLR cable into the camera's XLR inputs since the signal coming out of the MixPre is already unbalanced. If you have a MixPre-10 II, I'd recommend using the TA3 outputs for routing to the XLR inputs of your C70 at line level.
@creativegreatsvisualsАй бұрын
@@sounddev so the mixpre 10ii is line level with c70 but the mixpre 6ii is not with c70? Most work I “don’t “ want to record separate audio . Will the mixpre 10ii ta3 outputs to xlr inputs be balanced and will quality be at its best or is it the same as the mixpre 6ii where u mentioned that with 6ii it will lower quality into a c70 preamp ?
@sounddevАй бұрын
@@creativegreatsvisuals You can contact our support team for more detailed information if you'd like. service.sounddevices.com/contact-support/
@oliverleslie7382Ай бұрын
Thank you, just did it without a hitch just as you instructed and it worked. One tiny hiccup was when you said return it to the "root" of the card, not sure what you meant, what is the "root" of the card?
@sounddevАй бұрын
This means at the bottom level, not contained within any folder
@t9933Ай бұрын
I do not understand how this works
@sounddevАй бұрын
Feel free to reach out to our support team for help! service.sounddevices.com/contact-support/
@DASwealthАй бұрын
is the right knob suppose to be instantly click for the blue pop up for presets. or are you supposed to hold it for a few seconds? Wondering if my knob is bad since im pressing it really hard
@sounddevАй бұрын
@sounddev 1 day ago Please contact our support team. They do not monitor KZfaq. service.sounddevices.com/contact-support/
@sewiv24Ай бұрын
I got a message saying media too slow. What does that mean?
@sounddevАй бұрын
Please contact our support team. They do not monitor KZfaq. service.sounddevices.com/contact-support/
@sewiv24Ай бұрын
What does media to slow mean? This was the message I got when I recorded after formatting.
@sounddevАй бұрын
Please contact our support team. They do not monitor KZfaq. service.sounddevices.com/contact-support/
@patrickchase5614Ай бұрын
Is "High Dynamic Range Analog-to-Digital Conversion with Selective Regression Based Data Repair" (US20160241252A1) the patent you reference in re: 32-bit? I've worked quite a bit in digital imaging, and the "selective regression" approach you took to reconcile/cross-calibrate the different ADC stages is basically what I expected FWIW. From my own experience I'm sure that there's a lot of secret sauce in there to make it work well. As you say it's a tricky problem.
@brett1934Ай бұрын
Great guys ever
@nicolasfieldsoundservicesАй бұрын
Yall are the best!
@skyace8882 ай бұрын
Sound Devices seriously has the best product support I’ve seen at any company. You speak to a knowledgeable human on the phone right away. No silly automated system, outsourcing, or anything like that. You guys rock!
@dcchavez972 ай бұрын
This is good to know. I always knew their customer was good. I sent in a used 702T to be checked and serviced if needed. I got a good bill of health . I no longer use the 702T. I use the mix pre-6 ii. Love it!!
@dannepedersen2 ай бұрын
Nice to meet you…
@hitf52 ай бұрын
I think the Laura / Paul live demo combo team was outstanding! I hope they continue to do these. Coming from cheaper, less-capable brands to Sound Devices was one of the best decisions I've ever made. Currently rocking a MixPre 3II, MixPre 6II, MixPre 10II and my baby, an 833 with SL2 attached. And I anticipate these lasting the rest of my career without issue.
@JMLRecording2 ай бұрын
Thanks! Is there a way to record to both system drive AND SD at the same time as a safety? Thx
@sounddev2 ай бұрын
Hi there, the MixPre series does not have an internal SSD or "System Drive."
@JMLRecording2 ай бұрын
@@sounddev so if that's true I'm even more baffled. The SD card shows no files on it but when I plug the MixPre6 into my computer via USB-C it shows the files are there on the UNIT. Again, SD card is empty. So where exactly are these files being stored?? Thanks in advance!
@sounddev2 ай бұрын
@@JMLRecording The SD card should appear exactly the same whether you're moving files via USB-C or via card reader. If that isn't the case, then there's definitely an issue with your card reader.
@JMLRecording2 ай бұрын
@@sounddev oh wow. I'm using the reader on my iMac that definitely works fine though. Something is very wrong then. Thanks fro this info tho
@patrickchase56142 ай бұрын
I have a pair of MixPre IIs as well as an 888 and love 32-bit for its convenience, but I would remark that most _mics_ can’t exploit the full dynamic range of an 888 in 24-bit mode. If you trim the mic’s maximum usable level to, say, -6 dB, then you’ll find that the mic’s noise floor is still above the 888’s floor, and you can “run and gun” without worrying further about trim. I can think of several large-diaphragm mics for which this isn’t true, but those are the exception IME. It can also be true if you’re willing to push the mic well into its high-distortion regime, as you might with the hypothetical jet engine (after all, nobody will be able to tell).
@microdoulo22502 ай бұрын
Can doing sound devices 8 series Livestream USB
@rappit42 ай бұрын
Thank you guys for pushing 32bit. I am quiet surprised about all the doubt from a lot of production sound mixers regarding this topic. It's great to hear you guys understand what it' all about. And im here to say it now, that with 32bit capable transmitters and 32bit recorders rising in popularity, lots of workflows will change in recent years in favour of switching to 32bit from 24bit. Any dialogue editor would prefer 32bit recorded films if there is adequate workflow for it.
@Mac40music2 ай бұрын
Did the fast forward beyond 16x speed get added?
@paulisaacs59802 ай бұрын
No. Your request is noted. Here are the new things for v10 ... New: Added ability to record 32-bit float ISOs for full dynamic range recording. Added Daylight Mode On/Off option in the System > Display menu. Added support for the new SD-Remote Routing Matrix. Ability to rename Record Folders. Added Outputs > Playback Outputs menu with options for Playback to Headphones Only or All Outputs. When set to Headphones Only, input channels remain live to the outputs when playing back to headphones. New ‘Playback’ routing option in the HP Preset Routing menus. Ability to output playback timecode or live timecode during playback. Select in the new Timecode > Output Playback Timecode Menu. Characters ! : ’ ” / \ ? * are now available in the Notes metadata field. Added support for auto-mute on record, stop, and playback on Dante and USB outputs. Added Next Take Display option in the Record/Play menu allowing the Next take display to be latched on or momentary. Can be used with the Scene, Take, Notes ‘Follow stop’ toggle switch actions to quickly edit the metadata of the displayed take, whether it is Next or Current. Added Fahrenheit display for Smart Battery temperature data
@dbratspis2 ай бұрын
Nicely presented. Thanks for explaining all the new features
@hitf52 ай бұрын
Wohoo! Laura and Paul are awesome! Thanks very much to the whole team for all of the hard work that went in to v10. This is one of the reasons why SD is always on the top of my list when recommending anything recording or wireless.
@1jpdrums2 ай бұрын
Thank you for the ablility to rename the record folder!
@1jpdrums2 ай бұрын
The only downside for me right now is that my 1 month old 888 had to go in for a repair as channel 8 stopped passing audio when the machine got hot.
@creativegreatsvisuals2 ай бұрын
what are external filters ?
@creativegreatsvisuals2 ай бұрын
how do u set up the mixer 6 and Shure adx5d without the sl2 ?
@davidp1582 ай бұрын
Is there a way to designate frame rate? The MixPre manual says it "auto-detects" via HDMI, but in free standing mode. I'd like to set it to 24FPS, and mine defaults to 30FPS.
@orcaacht12232 ай бұрын
But why cant i change the Bitrate in record Settings to 32bit?
@paulisaacs59802 ай бұрын
Set it in the Track to Media menu. It’s all detailed in the User Guide
@brett19342 ай бұрын
Thank u
@10cm92 ай бұрын
I want the Mixpre series to also support SD-Remote.
@user-ru1cx2gy5w2 ай бұрын
wow!!🤩
@dcchavez972 ай бұрын
I love my Mix pre -6 ii, these look awesome for the real Pros!
@AkiSoundTaiwan2 ай бұрын
Yes sir!!!!!!!!!!!!
@hitf52 ай бұрын
Outdoor display mode! YES!!!!!!! Thank you
@RyanHuegerich2 ай бұрын
32 BIT FLOAT YES KINGS
@sounddev2 ай бұрын
👑👑👑
@PhilKensebben012 ай бұрын
😮😮😮😮😮😮😮😮😮😮😮😮
@bubbl_media2 ай бұрын
Thanks for the video! How is your reaper Input/Output Configuration? Can I route the incoming Dante channels somehow with an analog soundcard to my monitor speakers?
@sounddev2 ай бұрын
Hey there! Our support team can anser that, you can contact them here. service.sounddevices.com/contact-support/
@ohighgold2 ай бұрын
Hi ! I'm using Scorpio + CL16. I have booms and lavs on channels 1 to 16. I have LCR mics from channel 17 to 19 and a stereo pair on channel 20/21. Is there a way to group faders+trim on channels 17 to 32? Thank you!
@sounddev2 ай бұрын
Hi there! There is not a way to link channels 17-32 .