Hi, great video. Can you tell me what the sanding pole thing is called if I was to ask for one please?
@JaneMcDermott-qc3qhАй бұрын
Excellent video, detail etc, well explained. The sheen the floor has at finish, is this due entirely to paint used or was there another product added? i.e. lacquer
@user-mk7df1xo8oАй бұрын
looks beautiful thank you for the video. How would you do that with raw wood in the kitchen to make the kitchen waterproof? I basically took white birch, plywood and ripped planks face nailed it down and I’m thinking about painting, but I do have slight gaps in between the boards, so would need to waterproof everything for the kitchen and any suggestion? Thank you? By the way, I do like the look of the raw bitch Wood, but I’m having a hard time finding a wood filler to match it.
@NADERARYAN2 ай бұрын
Hi can you please say what kind of paint do you use do you recommend any brand thanks
@danielosullivan79403 ай бұрын
Did wall need to be cleaned first, and did wall require a stabilising solution prior to painting? … thanks
@user-ik5yx3lw1v4 ай бұрын
You missed a staple. Its right next to the paint can. Also, need to fill the gaps between the floor and the the trim. 🙂
@jackwardley36266 ай бұрын
personally if the money is there I would use aluminium wood primer being a hardwood and all those knots then 2 coats of oil floor paint well 3 if the finish is white with the grey primer
@sappys388 ай бұрын
Thanks for your review Rob i am getting my rhino ladder clamps tonight
@simonclarke13839 ай бұрын
Can you use then with youngs step ladders as well?
@rjh92209 ай бұрын
Just bought a 2015 model today...Loved the review!
@justintime130711 ай бұрын
Great review my man. Delighted to see someone post what I'd need in my van as a decorator. Tip on a decent racking company was appreciated, be looking them up. When you'd first started I wondered what you'd have to stop tubs of paint slipping about. Have been looking for some sort of floor storage to stop the 10ltr tubs sliding as they did in my vivaro, not a van I'd recommend. Hope your keeping busy, cheers 🙏
@naebadyersel11 ай бұрын
Is it possible to sand down a laminate worktop? or are you screwed if its scratched? ive tried using the soft wax repair kit but the wax just wipes out
@juliebowness3299 Жыл бұрын
I'm late to the party, as always ! but had to comment, as I have watched quite a few of these videos today, but yours is by far the most simple, achievable method and explanation, of how you did it. thank you for helping me believe I can actually do this, to my old floorboards.
@margerykirner5604 Жыл бұрын
Very nice Still afra😮d to attempt this myself
@wbev_thai1666 Жыл бұрын
The Picasso 3” is an amazing brush, love picasso’s
@suesmith1085 Жыл бұрын
Does any pros out there know if with this type of paste the wall paper, if you can actually paste the paper please. Would it matter
@mortsnerd6053 Жыл бұрын
Thanks, just what I needed.
@merlin5476 Жыл бұрын
I love driving my custom but theres nowhere to store paperwork etc safely without it falling out unlike my old Scudo. Stuff in the overhead compartment always falls out and anything in the door panels falls out when you open the door. Put paperwork on the seats & it flies off when cornering. It would also be nice to turn off the 12v accessory socket once you turn off the ignition rather than stay on for half an hour which my dash cam doesnt like.
@DavidBrown-ts2us Жыл бұрын
Did I understand that right that it was sanded with the 240 finishing paper in-between coats of oil?
@wbev_thai1666 Жыл бұрын
Just a fine denib that’s all he did
@danthibeault814 Жыл бұрын
is it available in the U.S.?
@adrianbrown7876 Жыл бұрын
I can see clearly that this is a complete faff....why don't you start with the longest drop first ...thats the way I have been taught 33 years ago with a very experienced tradesman
@ingridphillip5367 Жыл бұрын
I’m already happy because it’s how my floors looks 😅
@djay3010 Жыл бұрын
We fitted veneer oak worktop. The color fill is a bit rough. Can I sand it so it’s smooth. Thanks.
@queefcheif9306 Жыл бұрын
is it a good or bad idea to put a coat over an old coat of paint?
@fachadasymasfachadas1688 Жыл бұрын
👍
@leafrost8597 Жыл бұрын
Thx for the video
@adamanthony7465 Жыл бұрын
Wonderful thank you ☺️
@jacquelynharper3659 Жыл бұрын
Can I use any paint color for my wood floorboards?
@yvonnegreen93362 жыл бұрын
brother robert gardener floorlaying carpet
@19sheriff722 жыл бұрын
Will give this a go. Thanks
@MultiFuzzyhead2 жыл бұрын
Most of your videos not even in shot
@magicmike69612 жыл бұрын
did you wallpaper your cave using this way?
@garethdavies75642 жыл бұрын
where did you get your sheild from
@pettra12 жыл бұрын
Would you still allow an inch or two at the top, even if: 1) There is no coving at the top, and 2) Even if the pattern is a free match design? Thanks, Pete.
@monickalynn43652 жыл бұрын
Did same with an old 1980's red golden hardwood floor using Rustoleum Protective Enamel.This product is super durable,shiny. Since redoing floor they now have a line of floor paint/enamels
@martinadams93492 жыл бұрын
Hi, Rob. I followed your video the first time I did my kitchen worktops and was really pleased with the results. However, having decided to do them again, I have discovered that the Liberon Worktop Finish and Seal is no longer available. Could you recommend anything that would give equally impressive results, please? Thanks!
@Justicefu2 жыл бұрын
Cabots is good quality, doing my benchtops now and getting a really nice result from their benchtop clear varnish. It was recommended by the people at my local hardware store and when my builder asked what I was using he approved of Cabots too. Four coats with the 240 grit between each application, one tip my builder gave me was to add half a day to the recommended 2 hours between coats. He stressed that it's worth taking the extra time to do it right and you will have years between re-doing it so you may as well take the time to do it right. Good luck!
@MrAthlunkard2 жыл бұрын
I agree. Try it on pine door after Bin prime them took 3 coat
@gjclifford82 жыл бұрын
Why didn`t you use a card scraper to start?
@vibetank67382 жыл бұрын
I think it is terrible paint I agree that the 3 or 4 coats seem required, but far from acceptable. 🤔😝👍
@MrLeshop2 жыл бұрын
Did you put a topcoat on that F&B fella 🙅♀️
@stewartmathers98312 жыл бұрын
Have 2 of them red lights are on but not heating up any tips
@michaelcanavan51532 жыл бұрын
Can this process,, pasting the wall be used for a high grade lining paper Rob??
@noelgeddes36342 жыл бұрын
Yes. Regular drops of lining paper I will paste the paper. But with very long cross lining or lining a ceiling I now soak the paper with water and paste the wall. All pasting the paper does is expand the paper. Water does the same thing and just wet paper is easier to handle than paste covered paper.
@buzzincalifornia2 жыл бұрын
My question is: if you need to climb a ladder to lock down a ladder to the top of a van, what do you do with the ladder you used to lock down the ladder on your van, how do you lock that ladder down so you can use it to remove the ladder on top of your van at the worksite?
@Boxferret Жыл бұрын
In the UK we use various ways, ladder bolted to rear door, stand on the tyres or door opening, dedicated ladder loaders like rhino safe stow, small 4 tread stepladder or hop up platform
@62retrac2 жыл бұрын
Bad choice of sink for a wooden worktop! 🤦♂️
@allisonrossiter83192 жыл бұрын
This is definitely my experience. Has anyone tried the Dulux Trade waterbased Diamond Satinwood?
@williamdavies62412 жыл бұрын
Maybe I'm just old fashioned but why these days has speed of decorating become more important than the quality.????
@JonesyStayFly2 жыл бұрын
Stepping on non-stop toxic all day long all up in your pores.
@ralukafit50642 жыл бұрын
This is such a well made video. You are very talented 👏
@magzwhittle37993 жыл бұрын
What is the best sprayer and size of tip /nnib to use?
@briandavis89393 жыл бұрын
I would always start with long drop first then all should fall into place.