I got the azzuno 200f and it's a monster! great set up and the work cycle is up to 60% so you can keep welding all day long. for a better performance I adapted the flux core tip hose. great purchase so far 💪
@LifewithTay113 күн бұрын
They need to start back making these trucks
@Toolnaround2 күн бұрын
@@LifewithTay11 I would buy another in a heartbeat
@LifewithTay112 күн бұрын
@@Toolnaround I’m looking for me one now
@cujo2299 күн бұрын
Very soon i may decide to make my truck a farm truck to reduce weight underneath. Im hoping to improve fuel mileage. How much better mpg did you get doing around the town driving and highway taking it easy? On a good day my stock setup is giving me 14 city and 20 highway.
@This-ones-on-her11 күн бұрын
question, can I run this on 110v with a 25ft 10 gauge extension cord? the cord says its rated for max 15 amps and I running Mig flux 030 wire on some .065" thick steel square tubing
@Toolnaround10 күн бұрын
@@This-ones-on-her I have before it ran good
@This-ones-on-her10 күн бұрын
@@Toolnaround thank you sir! Means alot
@Mltemple833311 күн бұрын
FYI. This is NOT an AC machine. Right on the Amazon page it states it cannot tig weld aluminum. They call it an aluminum welder because they give you a Teflon liner to put in your torch instead of using a spool gun when mig welding. Also, I don’t see any provision for a foot pedal. This whole video a fake shill for the company?????
@Toolnaround11 күн бұрын
@@Mltemple8333 yeah I had that wrong but still a great machine! Still use it today running strong
@Mltemple833311 күн бұрын
One reason to buy from Harbor Freight is that almost any Amazon sold Chinese welder company may disappear in a year or change models every few months which may leave you dead in the water if it breaks.
@jeffkohler2114 күн бұрын
How does it do on 110v? Does it trip 20amp breakers often?
@raultovar41292 күн бұрын
I've been using it with 110 volts and runs perfectly, no breakers down 👍
@MrCfred8218 күн бұрын
What size lift did you get on that?
@Toolnaround16 күн бұрын
@@MrCfred82 2 -1 RC level
@rob615423 күн бұрын
Ok so is it reliable now man , with dpf system deleted and all ??
@teddygarcia146223 күн бұрын
How many miles you got on her now? I just hit 145k on mine gotta get the egr out next don’t want it to start leaking on me
@Toolnaround2 күн бұрын
@@teddygarcia1462 162k
@Ebonius28 күн бұрын
Just bought it. Impressed with all the stuff it comes with. I've been using it to disassemble and assemble bikes, eBikes and motorcycles
@SteveRilesАй бұрын
Mine stopped working at about 2 months old. I wish I could contact the manufacturer.
@ToolnaroundАй бұрын
Go to product page on Amazon scroll down to sold by .. select company name then select ask a question . Amazon will try to answer first question, type in the word other . It will tell you it doesn't know the answer and direct your next question to the manufacturer directly. Try that they will replace your unit it has a 2 year warranty
@SteveRilesАй бұрын
@@Toolnaround Thank you. I tried what you suggested, so hopefully someone will respond within a few days.
@jeffkohler2112 күн бұрын
@@SteveRiles any luck getting help?
@edgar01111980Ай бұрын
If you can, try it with some fluxcore wire for aluminum If it works for around the house aluminum stuff or any small project Im def buying that lol
@ToolnaroundАй бұрын
@@edgar01111980 I'm actually making a video with a similar product made by Azzuno soon I will try it out
@james10739Ай бұрын
I thought I had seen aluminum flux core wire but I thought when I looked it wasn't real or it was regular gas Shielded wire
@edgar01111980Ай бұрын
@@james10739 it mightve been yes but I saw a video of some dude who tried it but also it looked like he didnt know how to weld that much as it seemed like he was running it way too cold and no preheat so i still have hopes lol
@ToolnaroundАй бұрын
When the next unit arrives I will be sure to try it
@nicholiwheelessАй бұрын
Thanks for that dude. Just made my decision, I'm ordering it. 🤙
@cujo229Ай бұрын
What 5th wheel hitch are yiu using to tow?
@ToolnaroundАй бұрын
@@cujo229 Curt E 16
@cujo229Ай бұрын
@@Toolnaround are you using the demco 5th rail adapter that pulls into the factory puck system
@@Toolnaround do you have clearance issues with tight turns without using a slider hitch
@ToolnaroundАй бұрын
@@cujo229no issues at all
@markarruda4481Ай бұрын
Would like to the tuner and egr parts you used
@ToolnaroundАй бұрын
@@markarruda4481 I used ezlynk to install tune ...but ppe where my tune came from no longer offers off road tunes. But there are still plenty who offer tuning.
@mazdaspeed-Ай бұрын
Could you provide links to the stuff you used? Looking to buy one with low miles. Any turbo issues? I heard some turbos get carbon buildup.
@chandlercorbett9385Ай бұрын
Mine has 75k and has already had turbo replacement
@shermanyoung8185Ай бұрын
I have the Guozhi 200P $300 multi process welder off Amazon its a good diy ,hobby welder simlar to the Azzuno🧑🏭
@ToolnaroundАй бұрын
@@shermanyoung8185 I saw those they look great
@volt101xАй бұрын
I just went with the 5.6L V8 Gas.... 100HP more & far less problematic 🤷♂
@jeffherman5438Ай бұрын
Very creative and it looks sharp.
@ToolnaroundАй бұрын
@@jeffherman5438 thank you !
@Toolnaround2 күн бұрын
@@jeffherman5438 thank you
@skylarsohns9519Ай бұрын
Sounds good man I have 2017 platinum XD just broke 100k miles
@ToolnaroundАй бұрын
You should check out my other video I made some custom stacks for it...sound great!
@skylarsohns9519Ай бұрын
Have to take and get tpms sensors reset after mew tires?
@ToolnaroundАй бұрын
I did not like the factory pro 4x wheels so I bought these from someone else with the midnight package but sensors were not included ...next set of tires I will add sensors. I got used to it by now but the first year I thought about cutting the wheel and ending it all over that damn tire light.... 🤣
@haroldwright50132 ай бұрын
you need to get S&B air intake, better gas miles.
@Toolnaround2 ай бұрын
I sure do ...that will be my next mod
@haroldwright50132 ай бұрын
Where did you get that bug shield?
@Toolnaround2 ай бұрын
I'm pretty sure I bought it from Nissan parts
@MartiArtisan2 ай бұрын
What welding cart are you using for the Azzuno? What size bottle is that?
@Toolnaround2 ай бұрын
The tank is an 80 cuft the cart is the Vulcan from harbor freight
@@Toolnaroundthanks for the response! How long does the tank usually last you?
@waynenoll19672 ай бұрын
I really like the size of the XD but would probably get a gas engine if I bought one
@ToolnaroundАй бұрын
They have the gas XD
@waynenoll19672 ай бұрын
Those are some long trips from Louisiana. What part of the state are you in?
@ToolnaroundАй бұрын
North of lake Pontchartrain
@alandewar31432 ай бұрын
I owned mine 1 Month and the Coolant Tank went. 84.xxx Miles and the Replacement was around 240ish Bucks for the Whole thing.
@Toolnaround2 ай бұрын
Yeah I think I will be doing the same very soon
@PhilstoPhx2 ай бұрын
We just bought a 2019 in March. In April, we were going through the mountains in WV heading to Ohio and limp mode kicked in. When we got the trailer setup I went to an O'Reilly, I forgot my reader, to get the code. The local dealer was able to get it to clear. And said the coolant tank was backorder. When we got back home, I called the dealer and got told the last one took a year to come in. I was able to find a national warehouse and got told Nissan was in negotiations with the manufacturer and had no idea when they would be available. If you find a source for new, please post it!
@cujo2299 күн бұрын
@@PhilstoPhxId it's the float sensor on the coolant tank twist the sensor off, clear code and it will go off limp mode. I found out after replacing it with whole tank and keep the old one for the sensor to just plug it in and leave it zip tied to the tank.
@lwidinaguilar2452 ай бұрын
tuning is very crucial in these 5 liter cummins im doin one that has a cracked piston customer also did the egr and def delete but now he needs a whole new set of injectors due to carbon deposits head gaskets piston piston rings ex not to happy with his decision anymore lol also milage was at same as yours might want to trade in that junk
@Toolnaround2 ай бұрын
This has been by far the best truck I've owned has brought me and my family across the country in every direction pulling my 5th wheel and at the moment still running like new. This truck attracted alot of first time diesel owners who don't realize the significance of maintenance on a diesel leaving their truck in the hands of unqualified mechanics.
@jaycevessier75549 күн бұрын
Lmfao boy you don’t know the first thing about this truck. I’ve beat the ever living shit out of my 18. Haven’t had an issue.
@jeeves34268 күн бұрын
I'm looking at a 2019 Titan XD. What is the average cost to do an EGR and DPF delete and tubing?
@lwidinaguilar2457 күн бұрын
@@Toolnaround that's very true I'm not sure if this guy kept up with maintenance
@StrateTrippin2 ай бұрын
It's definitely a truck I'm looking into. I had a 17 titan then got rid of it after we bought our house. For the price for diesels this is a solid deal. How's the power on it. I've have ford's since that 17 titan and I regret getting rid of it. Great video brother!
@Toolnaround2 ай бұрын
Great power and comfort a perfect balance between a 3/4 and 1/2 ton
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@Toolnaround2 ай бұрын
nolatoolsforless.com/
@joenissan2 ай бұрын
We dont have emissions for these trucks where I am in ny but no way am I messing with federal emissions.
@ayushshah17772 ай бұрын
The review was helpful, esp when cheaper tools are finally competing with the big brands
@mrxmrp87952 ай бұрын
When I move out of this shit state Kalifornia, I’m going to get a modern diesel and remove all the emissions crap.
@gopalranji2 ай бұрын
❤
@erlinjosuevalle65673 ай бұрын
After egr delete does it makes roll coal
@Toolnaround2 ай бұрын
It can if you want...I have mild tow tune
@rjb.87703 ай бұрын
also make sure to check your injector harnesses regularly
@thecliffold58793 ай бұрын
For the crank issue?
@CountryLivingOnTheFarm3 ай бұрын
After all the mods and stuff do you have any active lights on your dashboard? If not, how did you bypass?
@Toolnaround2 ай бұрын
Your tune corrects this
@WilliamL19883 ай бұрын
Great video, thanks for the info. What are the odds, I just realized at 5:00 that vintage st is in the background. I'm from metairie and live in Slidell. I have a 2019 titan xd sv with 44k miles, I've been thinking about the ezlink but I still have a warranty on my truck and not sure if I want to change anything yet.
@Toolnaround3 ай бұрын
I actually have a place in Slidell as well here for summer...if I can help let me know
@Mike2500able3 ай бұрын
Good evening Tool-N Around, by chance do you still have the size for the Orings at the lift pump? I’m still running a stock 2016 that I bought new. Thanks for sharing and helping out fellow XD owners.
@Toolnaround3 ай бұрын
Hello I do have those ..I will send you the list needed to change all and location in a few
@Mike2500able3 ай бұрын
@@Toolnaround thank you.
@Toolnaround3 ай бұрын
@@Mike2500able I have 3 pics that show the receipt of o rings which include sizes and company to purchase from ...how can I get these to u?
@afranco93 ай бұрын
Did you attach the correct link? It's over $400 on Amazon.
@Toolnaround3 ай бұрын
I would give it a few more days they go on sale often. They had a save 50% at checkout box when I made this review.
@WATSONLF3 ай бұрын
Bro thank you 🙏🏽 great great informative
@joseduranjr49633 ай бұрын
We just bought another 2016 (2017) Nissan titan XD Platinum Reserve with 47,000 miles. What exactly do we need to do to keep ours running smooth like yours?
@WilliamL19883 ай бұрын
I have a 2019 with 44k(my first diesel)change your filters at 10k miles, change oil around 7k miles. I found online apparently the trucks come from the factory with valvoline premium blue so I just started using that. I drive at least 50 miles a day round trip commuting to work and never let the fuel get too low nor the def and everything runs so smooth. I also installed an auxiliary tank for longer range
@Snakekiller23172 ай бұрын
@@WilliamL1988 how much did the auxiliary tank cost you and how many gallons?
@BrunoLima-kb8ks3 ай бұрын
Nice looking titan, whats the tongue weight on the fifth wheel you pull?