Yeah, I’m having trouble with the insert but it doesn’t have a choice but to come off. Torque Specs: Two back control arm bolts - 50ft lbs Ball joint nut - 47ft lbs
@Lolatyou3322 ай бұрын
OH MY GOD, I can't believe they welded that exhaust in, bunch of dumb nuts.
@boink2452 ай бұрын
where did you get the tensioner
@kevinmeadows65803 ай бұрын
Great stuff!!!
@fred_b_3603 ай бұрын
same exact thing i recently had to do.
@fjbltysuc3 ай бұрын
You need to grease that boot!
@talaltaha56903 ай бұрын
You helped a lot. I cleaned my filter following your video 👍🏼
@ac36904 ай бұрын
Whete do buy them for 05 g35x
@MaxwellTheDude4 ай бұрын
Thank you brotha! Checked same tire on my 2010 and that ring is coming off
@dope18084 ай бұрын
this is a good DIY video; well explained and love all that "minimal work" you shared. great stuff!
@Runescape.4 ай бұрын
Thanks for the guide man, I will be doing mine soon.
@MannyVQ5 ай бұрын
Used this to help me install that remain seal god damn patience is key
@DanielGarcia-mw8zg5 ай бұрын
I feel like you don’t really know much about cars, for example, you don’t use anti seize to grease brake caliper guide pins.
@G35Tim5 ай бұрын
Again good fuckin videos bro. Thank you for makin this shit
@G35Tim5 ай бұрын
GOOOOD ASS VIDEO!!!! Really good video man! Bouta do mine at my automotive school. My first one ever. Ur video is gonna help a lot. Both of em, part 1 & 2, both really good videos man! Hope ur G’s still rippin. Ur cool as fuck for makin this shit fr
@arone43046 ай бұрын
Great video
@arone43046 ай бұрын
Why not replace the filter while in the tranny? Overall great video for the Gs
@jonathanguest16286 ай бұрын
Ive noticed a sound has started coming from my clutch 🤦♂️🤦♂️🤦♂️ almost like a powersteering pump noise...clutch is about to go...hard to decide if i wanna replace or just buy something else at this point...she has done me very well...280k miles and runs really strong...just dont know if its worth it to fix in the end really
@MsNikkibill6 ай бұрын
I'm having that same problem. Should I tell them to check mine
@isaiahmorales24226 ай бұрын
Doing this now and my axel won’t budge so I can get to the hub bolts
@theripper1214 ай бұрын
My axle was seized to the bearing too. Had to pull axle out from diff and beat and spray penetrant to get axle to move.
@toshibavoodoo6 ай бұрын
Excellant walk through. THANK YOU!!
@dan10354007 ай бұрын
This brotha really saved my life today. Wheel bearing and new pad and rotor in 30 mins thanks to you!! Mine was loose too!! I think the bad bearing worked the bolt loose 🤣
@DarrelllCampbelll7 ай бұрын
There's also a relearn procedure that needs to be performed after replacing o2 sensors. It resets the stored levels for the maf sensor. Otherwise it will still throw a code even though its fixed. Its a Nissan thing.
@saadmustafaisgolden50847 ай бұрын
So, a quick tip for anyone doing this job, me and my friend found it easier to get the top bolts and clips by unbolting the sternum and reaching down into the top of the bellhousing since it’s right there, makes it way easier!
@david-jd7lb8 ай бұрын
Stop using that gasket maker and use the one minute gasket stuff it's expensive but wellll worth trust!!
@cleavonadams86308 ай бұрын
How many quarts did you put in exactly??
@saadmustafaisgolden50848 ай бұрын
Hey! so doing this job next weekend, if you could compile like a small list of all the tools you used? Like the size sockets, the extension types, etc. Just tryna gather as much info and be as prepared to pull the weekend job as possible lol
@Damnjayy13479 ай бұрын
What brand clutch do you have
@carswithfran78438 ай бұрын
I did this job for a friend, he bought a clutch from ebay. Ebay is not my first choice for a clutch. Id go to Z1 motorsports or buy an OEM clutch if possible. It really depends on your budget and what your looking for performance wise.
@BornElite139 ай бұрын
What brand starter did you go with?
@carswithfran78438 ай бұрын
I got the starter from Autozone or advanced auto... nothing special.
@Apulux9 ай бұрын
this oem axle ?
@carswithfran78438 ай бұрын
This axel came from autozone I believe, as close to oem as possible lol!
@bmxkingJR210 ай бұрын
How high do you need to jack it off the ground ?
@carswithfran78438 ай бұрын
High enough so the transmission can slide out!
@Lolatyou3322 ай бұрын
@@bmxkingJR2 I just bought some 6 ton jack stands, goes up to 2ft tall and got a low-profile transmission mount. Ordered a clutch assembly and flywheel from Z1 motorsports.. I think one the the pressure plate teeth broke in my clutch, didn't hear much noise from it when it went out so don't think it damaged much, just think it's caused the clutch disc to be stuck in place.
@user-fv9vs8wz8q10 ай бұрын
Where did the e brake assembly go? 😅 Not able to get the hub assembly back on without removing it?
@teresaweaver660910 ай бұрын
We saw everything, thank you for sharing. ❤Good Luck on your next Adventure. ✌🏽💯👋🏽🙏🏽🫶🏽👀. Should smell much better, 👃🏽😁👍🏽.
@carswithfran784310 ай бұрын
Thank you!
@larrydecker88110 ай бұрын
The g35x is a great ride and we need all the videos we can get from good, common sense mechanics! I’ll subscribe. Keep it up my guy
@FoxNewsNewYork10 ай бұрын
I see the filter did not come out or install any easier by removing the glove box. So, you might want to skip removing the glove box.
@schiquitabaldwin995710 ай бұрын
Where to find these brakes at Ben looking
@marthawoods441110 ай бұрын
Thank you!!!!
@marthawoods441110 ай бұрын
Thank you very much!! God bless you and have a great day!!!!!
@marthawoods441110 ай бұрын
So do I just need to get a hub bearing
@Philliesdagoat11 ай бұрын
My e-brake is locking up when I roll forward and back, could that be a cause of bad shoe brakes….
@carswithfran784311 ай бұрын
Get both rear wheels in the air, remove the tires and check the parking brake cable and make sure its not getting jammed. If the (parking brake cable) is good I would check the (parking brake shoes) on both sides and make sure that system is working properly. You should find the problem or at least get closer to a solution. Good Luck! Let me know what you find!
@ketobeast848911 ай бұрын
So funny my interior is very clean like yours except I have a small tear on the drivers seat shoulder just like you lol. So annoying 😂
@carswithfran784311 ай бұрын
LOL all of these seats were no good from the factory!!
@zenyfilmsrambo11 ай бұрын
There are parts of the process that you skip and I want to learn but that's not possible. Greetings,my g ... for example, you don't start recording once you remove the caliper.
@carswithfran784311 ай бұрын
Noted! Ill try to show the full process next time! Thank you!
@philipmercurio20811 ай бұрын
Gonna save me a lot of time and hassle bro, taking my exhaust off now, I appreciate it
@claythomas950911 ай бұрын
Thanks Brother!
@carswithfran784311 ай бұрын
You bet!
@bowalt3972 Жыл бұрын
I think it might be easier to pop those ball joint cones off with a flat head and hammer but whatever works works, thanks for the video!
@psychic_wolf Жыл бұрын
Thank you for this video. This was the only video I could find that was full of information on the auto transmission for the X specifically. I was worried that it might have some differences since it is AWD vs RWD. Very nice camera work, good commentary and not too long or too cut.
@carswithfran7843 Жыл бұрын
I appreciate you watching! Im glad to know that this video was helpful!!
@zarad4446 Жыл бұрын
How long did this take you?
@carswithfran7843 Жыл бұрын
I did this job over the weekend. Took the transmission out one day, installed the new clutch and other parts the next day.