I have a kubota with a dump bed and it's way faster, buying a mile and going to add this feature. Wish the switch was on the dash, but that's what wrote and splices for. Thanks for sharing.
@Hannelore726 күн бұрын
I have this generator and cant figure out what to buy.
@mystuffedgarage990726 күн бұрын
Like from a protection standpoint or gen tent?
@Hannelore726 күн бұрын
@@mystuffedgarage9907 Yes a running tent.
@Hannelore726 күн бұрын
@@mystuffedgarage9907 Here in Tucson the monsoons can be brutal with winds. Will this tent hold up?
@mystuffedgarage990726 күн бұрын
@Hannelore7 we had around 60-70mph gust and it’s held up no issues.
@Hannelore726 күн бұрын
@@mystuffedgarage9907 Thanks !!
@bobewaltАй бұрын
Sure would have liked to see a quick demonstration as to how well it works. Nice video showing the simplicity of the mechanism. Thanks.
@mystuffedgarage9907Ай бұрын
Thanks for watching and spending time to provide feedback. I’ll look into making a KZfaq short with it working!
@billsemmendinger2592Ай бұрын
Interesting but If you use your miter as much as I do, swapping out the saw each time is going to get quite old.! I think I would maybe try to use some of those self hangers that fold down and let the saw hang nose down or devise a lift mechanism.
@mystuffedgarage9907Ай бұрын
You’re 100% right this is not for those that are wood working daily. Really appreciate the feedback thank you so much!
@glennprovenzano1837Ай бұрын
Great job
@MattCCramptonАй бұрын
Looks nice! Great job
@mystuffedgarage9907Ай бұрын
Thank you! Cheers!
@josephlau8476Ай бұрын
I like rc car very much too.
@DIY_Activities2 ай бұрын
Will the dump bed go up with the bed extended?
@stevebuteux82182 ай бұрын
this is great and I'm hoping to build one for myself. I saw the dimensions at the end but didn't catch or see how deep it is. can you tell me? thanks very much
@stevebuteux82182 ай бұрын
thanks, I just saw it was 9 inches
@StarknightMT_official3 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Waterproof Seat Covers for your Kawasaki Mule PRO FXT
@mystuffedgarage99073 ай бұрын
Sure
@StarknightMT_official2 ай бұрын
@@mystuffedgarage9907 hi,thank you. may i get your con-tact info
@StarknightMT_official2 ай бұрын
@@mystuffedgarage9907 hi,thank you
@StarknightMT_official2 ай бұрын
@@mystuffedgarage9907 hi, thank you. please let me know your contac t info
@StarknightMT_official2 ай бұрын
@@mystuffedgarage9907 hello, thank you. may i know your con tact info
@steeleaquain3 ай бұрын
Can you buy one for a mule sx xc?
@mystuffedgarage99073 ай бұрын
Not sure I would imagine this kit could fit anything with the proper adjustments.
@RyanCook41243 ай бұрын
Good video. Have one to install, and seems like a legit idea to protect these things in the elements, which is when we are likely to need them. I’m curious if folks fluid film any parts to help prevent rust.
@scottss2133 ай бұрын
That turned out great thanks for the video
@jameslester38613 ай бұрын
I installed one of these one my 2016 4010 about five years ago. I used step drills to drill holes in bed. One of the best accessories I installed. It's slow compaired to JD and Kubota but works very well. Remove your bed hold down latches. You don't need 'em and If the bed gets latched down you will be blowing fuses or breaking something.
@MyTechWebTV4 ай бұрын
Great idea on using a wireless winch control for this. Just my two cents but you should make jumper wires and reconnect your switch as well just in case the winch module fails when you need to dump a full bed. This way you could still use the manual switch to dump. Seems things never break until you need them the most. At least that seems to be my experience.
@zyciejestpiekne19884 ай бұрын
Good job ❤
@user-hp8pg3yy2g5 ай бұрын
Does it drone ?
@Doors_grimace11116 ай бұрын
Anyone have any experience in how long they last? I like the black version. Does it help the performance any of the truck?
@mystuffedgarage99075 ай бұрын
I’ve had mine for two years and still going strong. Performance wise it’s not that much of an improvement until you get into tuning.
@Doors_grimace11115 ай бұрын
@@mystuffedgarage9907 thank you for answering!!!!!! I love your name by the way hahaha..99% of peoples garages...when you say until I get into tuning? You mean liken getting cold air intake, turbo, etc?
@user-rp5mu2dm9w6 ай бұрын
you could have put the rod in thru the top.
@gailwilliams90846 ай бұрын
If you would turn your nailer 90 degrees you wouldn't get so many blowouts.
@mystuffedgarage99076 ай бұрын
Great call out! You would think I would have figured that out after the 100th blow out!! Thank for watching!!
@gailwilliams90846 ай бұрын
Loved the build and do you think it would do well on a french cleat? @@mystuffedgarage9907
@waynemiller60704 ай бұрын
Yeah, if you look closely at the nails. They are sharpened on one side only. That leads them to curve in the opposite direction. So, if you need them to go One Direction or another, you could actually put the nails in the gun going One Direction or the other.
@jeffreywhite76576 ай бұрын
I like your build. I really need to do this as well. I just may make a trip to Menards! 😅
@mystuffedgarage99076 ай бұрын
Excellent! Thanks for watching!
@jmdminiaturehorse637 ай бұрын
I just cut mine when I took it out. It was alot easier.
@mystuffedgarage99076 ай бұрын
I want to be able to put the factory back on if someday I plan to trade it in for a new 2024!! Hint hint….. lol
@jmdminiaturehorse636 ай бұрын
You could weld it back together..lol
@user-kk6if6hp2p7 ай бұрын
Bro you’re frustrating to watch slower than death
@mystuffedgarage99077 ай бұрын
No one forced you to watch but thanks for spending time to write a comment!
@jeffs.24317 ай бұрын
Jack stands would have been a big help to hold up the exhaust.
@mystuffedgarage99077 ай бұрын
Totally agreed only if I had extra to spare as the larger ones I have were holding the truck! Lol
@chrisrieger92017 ай бұрын
What was the name of that clamp square you used for the saw
@mystuffedgarage99077 ай бұрын
It’s part of the bora guide rail system.
@kelleywilliams53347 ай бұрын
I'm guessing you can not raise the bed when using the full bed!
@mystuffedgarage99077 ай бұрын
You can raise with both size beds no issues. I’ve raised about 1500lbs with no issues. Mind you I would not recommend going over max capacity of 1000lbs.
@ridgetopoutdoors14608 ай бұрын
Thanks for the information!!! Would like to do this upgrade to my new Mule Pro
@mystuffedgarage99078 ай бұрын
It’s a game changer for sure!
@ridgetopoutdoors14608 ай бұрын
Do you know the dimensions of the cylinder such as the retracted and fully extended lengths?
@mystuffedgarage99078 ай бұрын
I’ll get those measurements in a few days!
@mystuffedgarage99078 ай бұрын
Just posted an update video with measurements. Please check it out!
@scotthustedde25689 ай бұрын
I’m guessing you never made another video after this. Nice safety glasses. Nothing like losing an eye
@aaronortiz410 ай бұрын
it looks really cool, I'm making mine tomorrow... Thank you
@davkenrem10 ай бұрын
Great music!!
@kjyukon10 ай бұрын
Just finished installing mine, the video was good for some guidance. Kawasaki said made for the fxt and lift weight is 1000 lbs
@ryanbigler485010 ай бұрын
What are the dimensions of this build? Thanks.
@danmacintosh409411 ай бұрын
Nice video. Thanks for sharing the struggle with us
@user-fx7oe9oz7d11 ай бұрын
How close is the stainless tip from the bottom of your bumper? No issues with it heating up the plastic or paint?
@mystuffedgarage990711 ай бұрын
It’s almost 3” away no issues with temperature
@XJ290 Жыл бұрын
I’m looking at getting this same tent. I ran my 9500 df for a few days after a ice storm and got lucky it wasnt snowing or dumping rain, but I threw a plywood board on it. Did you get the standard version?
@05greendmax Жыл бұрын
It sounds exactly like my 6.0
@MrLugo78 Жыл бұрын
Just finished my install, your video was so helpful. Still a lot of pain but guaranteed much less due to your video.
@mystuffedgarage9907 Жыл бұрын
I’m glad my pain made your pain a little less. Having someone to help really does make a difference. Thanks for taking the time to leave a comment.
@nhmaze Жыл бұрын
I recomend using a jack stand so you can continue making videos. Thanks for the good info!
@jblackb1 Жыл бұрын
Touché!!!
@grandlakephil Жыл бұрын
How ya like it by now? When rolled up, how big diameter is the roll? Also when rolled up and strapped down, how far back from the front of the box to the rear of the roll. I have an 8’ bed too and I pull a fifthwheel camper
@dangipson89 Жыл бұрын
I pick mine up next weekend what was the cost of the the lift.
@mystuffedgarage9907 Жыл бұрын
I think I have around $900 on eBay. It’s worth every penny!!
@spitzerone Жыл бұрын
I too have Dewalt tools so this would work for me. I think that in addition to this I want to make it a charging station so all the tools, batteries, and chargers are at one station. Thanks. Nice video.
@KikaWaiAlae Жыл бұрын
What is the name of that guide? Is there a link to purchase it
@mystuffedgarage9907 Жыл бұрын
100-in WTX Bar Clamp www.lowes.com/pd/BORA-WTX-Clamp/1002792414
@mystuffedgarage9907 Жыл бұрын
I think that’s what your asking?
@supergirl2997 Жыл бұрын
Would cheaper and lighter to just buy one off Amazon.
@mystuffedgarage9907 Жыл бұрын
This was made of scraps around the house and holds way more than anyone I’ve ever found on Amazon. But to each his own appreciate you taking the time to leave a comment.
@joemarchesani8455 Жыл бұрын
@@mystuffedgarage9907 wouldn't be any fun to buy it on Amazon! Great job!
@jamesharless5357 Жыл бұрын
Nice work, and great video!👍🏻
@mystuffedgarage9907 Жыл бұрын
Thank you!
@carlwheeler3403 Жыл бұрын
I just bought a WGEN9500DF yesterday on Sam's Club web site. I would be curious to see if the Gen Tent could survive hurricane winds, probably not. Great video !!
@mystuffedgarage9907 Жыл бұрын
I highly doubt it but it has withstood around 40-50 mph gust without any issues.