Thank you!

its 2024 and im ready to initiate the housefly apocalypse - where can I order one?!

You refrained from mentioning ego2114 model is not self propelled

C'est un peu plus fort que celui des policiers , classé arme prohibée aux Canada par le gouvernement fédéral, 😂

There have been a few studies done of bi facial panels were they have put them vertical to the ground to achieve better performance. Rather than the usual angled approach of light capture, just a thought.

My sub2k is pretty accurate I think it might be the ammo

I purchased this mower from Lowe's a little over a year ago for around $400 with a military discount. Prior to that we had a local landscaping business cut our lawn for our new home at $60 every couple of weeks which wasn't often enough with how fast grass grows here. My yard is roughly around 5000 square feet of centipede grass. I've used gas mowers for many years but decided to go cordless electric and save money. This mower is a champ. My lawn can get quite thick with the amount of rain we get here in the Carolina's. It's almost effortless and very quiet compared to gas. It takes about 1/3 the battery charge to cut my lawn and I tend to cut at 2" in mulch mode. I only wish that this mower would support double blade mulching but it's still very effective as is. So far it has not let me down. The heavy battery takes about 30 minutes to fully charge. Hit the mower with a good air blower blast after cutting, fold it up and you're done for the day. At about $120 per month savings by mowing myself, this mower has paid for itself many times over.

What if you mounted a mirror the length of the stand and directed the sunlight from the mirror to the reflective material you have on the floor so the ground facing side of the panels could absorb more reflected light! Difficult to explain fully without sketched but you may get what I am saying, possibly. What a beautiful location, like the solar panel mobility.

I have two 235 watt panels and they usually put out about 40 to 60 watts combined even when it's cloudy. I don't know what is wrong with that panel.

~2% of rated max?! Hope you can find something closer to 5-10%.

Good video. Regarding the warning signs all over the can, how dangerous is that stuff?

This pump SUCKS!! Adapter sucks. You can’t pump your bike up at all with this thing it’s a waste of money and time and effort. Total frustration directions suck!! don’t waste your money on this crap! And even their standup pump does the same thing it sucks too!! don’t waste your time with Blackburn!!

Wow! Wish I would’ve watched this video before I went to Lowes this morning. I have an oscillating tool & needed a blade to cut wood. Haven’t needed it until this week when a huge tree limb fell into my yard during a thunderstorm. Can’t afford extra expense to hire someone atm. So I went to Lowes this morning to purchase a blade I found on their app. $10 bucks, why not? I asked man in the dept to help me locate the blade. They didn’t have the specific blade so I reluctantly explained my dilemma. Him…..Ha! You can’t cut tree limbs with that!!You can try but it will take you all week if you’re lucky!” Me…. Really? It’s not that big, def not talking size of a log. I suppose I can try a hand saw. Him….🤯🤯🤯You might as well use a pocket knife.🥸😝You’re gonna need a chain saw or this tool. Shows me $200 elec saw. Me…. I would just hire someone if I’m going to spend that much $$$. Besides I have a hand saw & I’ve used it to cut through steel plumbing pipe. Worst case I also have an axe. Him…. That won’t work on wood. Blah blah blah You may get an inch or so by end of week if you’re lucky. 😏 The man was seriously getting angry. Me… ok great. Where do I find your pocketknives? Him… we don’t carry pocketknives Me…. I select one of the blades they had in stock & head to checkout. “Ok then. Thank you for the advice. Good day” Him…. Chuckles & mutters “hmmm yea good luck” Such a jerk!!! Watched your video before I took the blade out of the package. I wasn’t sure it would work but he made me so mad & more determined. Btw it worked perfectly fine. I’m even more angry now cuz I let him doubt myself. I was so close to giving up on DIY. I’m not strong by any means but I grew up on a farm & have put in more then my fair share of hard manual labor. I used to split wood all the time for Pete sake. Not sure why I always get these crotchety ole men criticizing me in hardware stores. This is why I was reluctant to elaborate on my project details. Ugh! And don’t get me started on the dude who wouldn’t hand over the parts i needed for plumbing repairs. 😡😡😡 Same store, different a**h*le. Anyways, thank you so much for your video!!🤗🤗🤗🤪🤪🤪😁

What voltage battles are you using is it 2x20v or 2x40v

Where are the cups ??

how do u keep ur grass weed free and so lush

i have a dewalt one, the metal underneath mine is rusting and corroding

Well, i dont know if i bought a dud milwakee locking bit holder, i used it with my low powered impact driver, and within 6 montys of very light use it came apart while using it!!! The sliding collar popped right off the end, luckily the ball bearing werent lost, but it allow d me to see how it was made and im not impressed with it really. Poor way of holding the sliding collar onto the holder. I wont be buying the same one again.

So beautiful!

This will make your kayak even more heavy and probably with fully loaded with equipment your exceeding the max weight required limit

Hi, We don't see much, but is it possible you have clubbed fingers? If so, I'd suggest visiting a clinic justi n case. If I'm mistaken, I want to apologize and please disregard my message...

I have allpowers r600 v2 with quiet fan and it is great. Charging curve for all so you can see how much power is needed to each % . it was measured from electric plug. 0 % - 1% less than 100 wat for few seconds 2% 127 wat 3% 160 wat 4% 199 wat 5% 240 wat 6% 273 wat 7% 304 wat 8% 342 wat 9% 368 wat 10 % - 80% full rapid charge 413-419 wat 81% 390 wat 82% 356 wat 83% 327 wat 84% 298 wat 85% 268 wat 86% 239 wat 87% 208 wat 88% 178 wat 89% 149 wat 90% 119 wat 91% 114 wat 92% 107 wat 93% 100 wat 94% 94 wat 95% 90 wat 96 % - 100% 88 - 86 - 84 wat

8 years have passed and my AUKEY is still alive

Do you still recommend the EGO a year later?

Is there a filter.

Merci Pat, super bon.

How much was your hourly pay?

I like it. I like the firm padding. I use my glutes by straightening my leg to catapult my leg backwards with my femur on the saddle as a fulcrum (like 70s and 80s riders) and so the padding needs to be firm. The padding on my old Bontrager saddle was slightly firmer.

I appreciate this video. Im getting the Minn Kota 30 lb thrust motor for my 110.

We bought a GoLabs DL300 and it worked for ~4 charge cycles, started throwing error codes and would discharge when not even on. I tracked discharge with the unit off (turning on only to read remaining charge) and for 2 days it was fine but then went to zero in the space of 10 minutes. I charged it one more time and I was able to recreate it but then it would not charge and I got error codes till the battery fully ran out. We contacted 'support' and got nothing back. I have worked in electronics for decades and so realizing we were on our own, I took it apart and found a fried U11 on the main board. It wasn't dropped or mishandled and so my conclusion with other problems I am seeing reported on KZfaq is that the components, assembly or both are poor quality. I would avoid this product.

I took my DeWalt 2024 model back which cost me 700 dollars and it just didn't have the power there is a connection in the base where the battery plugs into on the lawn mower. Both batteries fully charged. I also switched batteries around in the base and the left side had power and the ride side didn't and you could even tell when it lights up the battery grid on the handle bar and same thing no power. For 700 dollars the Electric Lawnmower it should be able to run circles on the lawn. I could understand if it was some cheap off brand lawn mower but its a DeWalt which is supposed to be a great brand and and live up to its name. I got my lawnmower from the Home Depot which is 67 miles from where i live and i am not going to take it back and get another one and have that same defect happen to me so i bought a new Honda Gas Mower for the same price. The older electric DeWalt's models look like they actually work but I really am not impressed with DeWalt electric mowers.

Jesus loves you God bless

You're awesome ❤

Dude clean the dust before making the video. You kidding?

Cant you just flip the seat to the raised position and sit sideways to get to the motor?

So I’m buying this same kayak and was wondering with how you have your trolling motor side mounted, do you have to artist your steering in order for you to go straight if that makes sense?

What oil using this kobalt chainsaw

4:04 Could you please tell me how to reset the maximum and minimum readings in the "memory" column of this thermometer?

thank you for this! tired of tik tok “reviews” , i needed an in depth one(:

I think you are not understanding that this is for Small stuff that draw low power. Not for a Blender 😂

You should never have your hands near a blade.

You need a better workstation and clamps, what your doing is dangerous, no stability at all.

I see a basic problem with this setup. The way it’s placed, the motor/shaft/prop must move forward to raise. For me this is bass ackwards. I want my motor to lift up to the rear, so I can leave it unlocked in shallow water offering some protection to the prop and motor if an object is hit.

The comments about not clamping the wood harder against the shoe = stupid. When you go into the woods to cut wood, there are no clamps, and stuff bounces around everywhere. Great comparison, thank you!!

I bought an EGO 2135SP and it’s fantastic! I used my Lawnboy SilverPro Duraforce for 21 years and the EGO outperforms it! 👍🏻✌🏻

Handy tips for when you get accosted by a gang of militant coconuts👍

I use a 100 watt swarey daisy chained with the renogy eflex 100 watt and the bluetti ac2a solar generator and i can charge it in 20 minutes

Where can i get one of these

Thank you for the review. Transitioning from gas mower to electric mower.

where can you find the adapter for casseroles for this model (the round thing that connects with the hose) ? or it comes with the casserole?