does a fex port configration eg 100/1/3 need to be made on each nexus switch?
@antonioalma1602 жыл бұрын
What model do you having sitting lit up on your desk in the video?
@scollora Жыл бұрын
It's an old Touch8 controller for a C20.
@leonelnunez88222 жыл бұрын
Thank you very much Sal, it was very helpful! greetings from Argentina
@jonathan21463 жыл бұрын
Clear and detailed. Thank You
@Greg-xg7hk3 жыл бұрын
Thank you Sal, short, nice video with good explanation.
@clintgenosa95424 жыл бұрын
coach erik spoelstra can teach firewall too..😅
@felipepadilla62454 жыл бұрын
I'm trying to connect a server with a Fabric, I already created a Service Profile for the server, but it doesn't connect, I think is a problem with the FEX's I/O Module but I'm not sure, I'll be very thankfully with your help
@rektifikator5 жыл бұрын
It's very usable video! Thanks to it I have configurated an ACS RADIUS server to authenticate wi-fi users.
@bustabob086 жыл бұрын
Used this tutorial on ACS 5.8 to setup RADIUS for APIC-EM. Thanks for sharing!
@ej78307 жыл бұрын
Nice Sal 😊
@krunal4baps7 жыл бұрын
Do we have any simulator for Cisco FC zoning?
@wahidny7 жыл бұрын
"as you can see this has been SETUP" that is your first thing you stated on your video, then HOW IS THIS INITIAL SETUP? PLEASE UNDERSTAND WHAT DOES INITIAL SETUP MEANS!!!
@someguy49156 жыл бұрын
If you do not know how to enter an IP address you should not be working with this equipment...
@M3Hogan7 жыл бұрын
thank you!
@Cyberdemon19857 жыл бұрын
Great Video.... used this to Create a Layer 3 VLAN to the Nexus 7000 for a Cisco Wifi Controller solution. Thanks!
@mikeb.21668 жыл бұрын
So I just tried this with ESX6 Update 2 and it didn't work. It appears that the despite the ESX GUI (both console and when you attach using the vsphere client) indicate the correct MAC as defined on the service profile that all the clones will talk to the network (at seen in FIs) using the MAC address of the original host. Maybe something changed in ESX6 and now the MAC is recorded in some config file that needs to be updated, but I was disappointed that I couldn't get this to work.
@syaxim8 жыл бұрын
Great videos!
@TeamPartyusa8 жыл бұрын
wheres 4?
@mphohlongwane31378 жыл бұрын
thanks, very informative :)
@HaridassAppunni9 жыл бұрын
Very good video. Thanks a lot for clearly explaining this.!
@michaelhall9829 жыл бұрын
Good video, thanks
@timhershman68379 жыл бұрын
Sal, great tutorial. I was able to use this tutorial to set up external authentication between our RSA system and our Cisco Sourcfire appliance with about two days experience on Cisco ACS. I think the real key to ACS is that the menus work from the top down. Your video does a good job of demonstrating that. Thanks again.
@ramane29009 жыл бұрын
Great video, clear and concise instructions. Keep them coming.
@jrsprofession91499 жыл бұрын
Great video, should your Diagrams port label on the 2232 be E101/1/2, I think you have E100/1/2
@arolex119 жыл бұрын
where can I get the ucs moudules
@rishikesh99 жыл бұрын
Helped to get the basics clear. Thanks
@sonamdorji47110 жыл бұрын
I have cisco UCS B200 M3 server,i want to configure RAID and install centos. please can you instruct me for that
@robertcotterman299010 жыл бұрын
Can you use ACS as a radius server for all your devices? E.G. Phones and computers, or should we virtualize a server to use RAS on?
@christopherthan469610 жыл бұрын
Hello Sal! how you add the vlan id 140, 141, 142, 143, 144 and 145 to the peer link PO1? I am not but it must a simple step like : config t -inter po1- switchport trunk allowed vlan add 140-145. do it on both Nexus 5Ks. I hope this command will not flap the peer link.
@karthigeyanr813410 жыл бұрын
Thanks. Great Video.
@scottsheldon414410 жыл бұрын
Great job sal. These videos are better than the CBT nuggets videos.
@luisjimenez820810 жыл бұрын
Hi!!! I am trying to integrate the vcenter on UCS Manager but I have a problem with this, when I try to associated the host to the DVS on VCENTER at the end I get this message Reconfigure vSphere Distributed Switch:Cannot complete a vSphere Distributed Switch operation for one or more host members. See the error stack for details on the cause of this problem. Time: 07/05/2014 01:39:31 p.m. Target: UCS_VM vCenter Server: localhost Error Stack vDS operation failed on host x.x.x.x, An error occurred during host configuration. got (vim.fault.PlatformConfigFault) exception I don´t understand very well the part of PORT PROFILES, I need to generate a port profile for each vlan? or can you explain me this part? Thanks!!!
@larose788010 жыл бұрын
please how can I determine the password used to access putty ??
@immortalrising610910 жыл бұрын
Thank you for the help Sal!
@arshadgp10 жыл бұрын
Very helpful and neat & straight ! THANKs
@CCNP1410 жыл бұрын
Well, Happy new year and many thanks for your kind effort! Ali
@MI-hb9vv10 жыл бұрын
hi sal, i have connected one pair of FC cable between my 2 nexus 5548up. how to verify the connectivity between them ? it would be fine if I could get any assistance.
@mb775-g9n10 жыл бұрын
Hi, thanks for the video. I see you are using version 8.4. Are you running a real ASA or GNS3 version? The Cisco Prime Security Manager is installed on an ASA o is an external application? Any help to download it? Thanks
@raypedong11 жыл бұрын
Can CX do Policy scheduling? Means policies can be applied in certain hours.
@Kirbini11 жыл бұрын
Hi Sal, In this vid you say you're going to put up the UCS side of this equation but I did not find it on your channel. Does such a video exist? I have a working RADIUS setup but no matter what I do in UCS no auth requests ever hit the RADIUS server and the UCS log says something about PAM and "invalid user" meaning it's trying to auth me against the local DB and not RADIUS. I'm sure I have something wrong but the Cisco docs are not helping.
@c0576617311 жыл бұрын
Hi Sal, great vedeo. Do you know how one can setup Cisco ACS 5.3 to user a Radius server for two-factor authentication? The scenario is: 1. user login using AD user name and password 2. AD verifies the credentials 3. ACS then request a RADIUS server to issue an OTP to user 4. user is then prompted to enter OTP 5. OTP is then verified with the Radius server.
@javieraquino855011 жыл бұрын
Cool video! How would this work if you have htt p s:// enabled on facebook? Would CX still recognize the app?
@BertrandAKOA11 жыл бұрын
Great video! We are using ACS 5.1, How can I do to authenticate for exemple ADSL users, but those users are restricted to access any device (routers, UCS, Switch)? using radius as protocol.
@TheSplitfinity11 жыл бұрын
Hold on a second.. You do realize that to connect an FC cable to the FI requires a port license right? I dont think this is a money saver so much as a evolution of the FI, which i hope that Cisco only charges port enablement fees for Blade chassis. Cisco talked us into buying a couple 5k's northbound and to terminate the FC and ethernet.
@sjwasko11 жыл бұрын
For those sitting up PowerShell for the first time, ensure that you type Set-ExecutionPolicy in the PowerShell Console to set your system up to accept non-digitally signed scripts (in order for this to work). Great work Sal!
@craig154011 жыл бұрын
Awesome demo!
@ChrisFederico11 жыл бұрын
Thanks Sal ... great advise !
@scollora11 жыл бұрын
If you have an existing SAN with UCS and everything is working well, I would leave it as it is. You can't have native zoning and then an upstream connection to a SAN as well. Yes, you could have the storage itself connected to a SAN and UCS, but to me, that just creates more complexity. If it's working well, just leave it alone.
@ChrisFederico11 жыл бұрын
Hi Sal ... If we move to the native FC zoning that shouldn't cause any connectivity issues to the SAN right ? Would we see a performance boost since we are taking away a hop to the SAN ?