Bart!❤️❤️🌹🌹

9:20 what about our trees here in iraq 🤣🤣🤣.

Benefit of internal components, at least in my case, is that less debris gets inside causing wear or damage with time.

Cody n Dave were the best and meshed great together!!

Working at a lab, the ST300 came in handy on a daily basis. Anything smaller would not really get the job done.

Compere the delica with the mini recon, they’re exactly the same size and that intuitive feeling when you grab them. I did go a bit more to the cold steel because they’re indestructible knives, and the mini recon is the best overall cold steel knife imo. Maybe the best overall pocket knife in the world.

I'm about to buy a voyager but idk if I want the clip point or drop point. Any recommendations or insights as to which is better?

They gouge us Canadians when it comes to knives. I've had a ton of Beckers and finally got my dream knife the Esee 6. I love it because you get everything; micarta scales, hardshell sheath, and that Rowen heat treat. I've been using it everyday since I got it and have yet to sharpen it. The Bk7 is a great chopper and I feel it bites better when chopping wood, the Esee 6 requires a bit more swings to really chop so for chopping, the BK7 gets the cake but the Esee just stays sharper and it's so comfortable in the hand when using. I might get the Izula to piggy back on my 6, or I might get the Junglas. We'll see..

Its like comparing the wave to surge ones heavier duty and for big hands great video!

Korean 🚀🇰🇵🚀 Acupuncture is the Best Remedy For International Dis-ease called : ..... 🎃.NATO.🎃. 🧞 isn't it pravda that Ukraine Become a Pia-no keyboard for NATO Composer to play : (zeL+en+sky) style Symphony of Necropolis, For: Black Rock,💱 Black Stone,💱 Black Water,💱 In "White" House🚽. What a clowns.🆘.

They are not riveted together. They are basically a Chicago screw. They actually make a tool set that makes it easier to get apart. I have the super tool 300, and it is my favorite tool that I own.

CTS-BD1N is on the softer side but it has very good corrosion resistance.

I was going to buy it but sadly the line was too long

I like want like to like like go like to like the like store LIKE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Why do feel like Dwight Schrute would love this?

they look so cool i bought some like yours but green and grey

Have a brand new lefty pm2 has it bad! Spyderco sent me a junky xl manix recently as well about done with them damn thing hard to center, blade play etc ridiculous

Arguably the greatest tutorial involving one's middle finger I've ever witnessed. When he shows how to place it in your palm, and how the middle finger then joins up with the other two fingers it "wants to get back to," the riddle is solved and the trick is deciphered. Pupil becomes master. Well done my friend, even if I am a decade late.

So many beautiful Swiss machines in one place!

If I've got pants and a belt on I've got a leatherman wave on me and have for 20 years. Use it all the time.

I've heard that glass sheath dulls the knife.

i love endura

I have the Camo and red classic titan and florist and huntsman and mini champ day. And some hard to find classic Sasquatch and Bigfoot ones

Love the look of the esee but thag handle is short.

Camo love yeah!

There are 256 pages in this book with the index and appendices. There are 10 chapters in this book. There are recipes in this book. There is also a glossary in this book as well. Bushcraft 101 by Dave Canterbury is a good book to have in any library anywhere.

All the tools on SAK are made of the same Inox steel. Quite resistant to rust.

Dave and Cody were the BEST Survival Team online and probably off PERIOD !!!

your wrong you can take apart a Leatherman there knurled screws the plier head is a just circular pins but the tool side has to flat sides so the body wont move, you can only turn the screw pin on the tool end, you can customise the Leatherman just remember to put a bit of lock tight back on the pins when you screw them back up

I personally carry two pocket knives one in the front and back up next to my wallet

I'm glad you touched us on that topic a simple could have saved her life I remember a couple years ago I was working at this company where they had this packaging of cardboards this tie-down will come down over the boxes and tie them down the operator fast enough and now he had his arms tied down and he could stop the machine he yelled out for help some ran up stop machine but not before his arm were with 5 plastic tie the kill switch was out of reach the modifed the was place on floor, but the thing was,5 employees had some one found pair scissors in the office.

I love Esee but I went with the BK7 for its potential tactical use for self defense.

I have the Esee 6. Great knife and the steel and heat treat seem pretty awesome. I don't really like the plastic sheath and for the money ya why not throw in a kydex sheath. Not a big fan of the flat handles either, they're not only flat but kind of small and there's nothing on the butt, it just gets smaller which reduces its chopping effectiveness. As someone mentioned it is also blade heavy. I came here because I was looking for a comparison between the Esee 6 and BK7 and while I did learn some things I wanted to see them compared in action.

Prepare your Ship Of Death!

Files + water = Rust 100% of the time

Hey are you okay?

I would prefer the Esee 6 and Mora knife as a combo, over a Bk16 or Esee4.

I carry a Multitool all the time and my friend always has a pocket knife and he has asked me to use my pliers, screwdriver on the Multitool, or he cuts himself trying to use his knife as a screwdriver, pry bar, or fail to fix something. Yes, a multitool is nowhere near the best tool for doing anything but I have helped people or got myself out of situations. As far as self defense, I doubt it will save you from a robbery or attacker, unless your a expert fighter with a knife, but even then, a bullet or a few bullets would most likely put you down. If your attacker has no weapons, I guess a knife, or a multitool could help, but I definitely wouldn't carry anything less than a gun for that purpose. I rarely cut open stuff away from home, so I use a pocket knife at home and a multitool away from home. A multitool is most likely acceptable by cops, if they see it, where knives are most likely considered as weapons. I have a Leatherman Charge G10 that has a S30V steel knife and Leatherman has the Arc with a Magnacut steel knife on it which proves knife steel can't be the reason to say pocket knife steel is better, but you can definitely say that knife blades on fixed or pocket knives can be bigger and stronger than multitool knife blades. I normally carry a SOG Powerpint, and the knife blade is ok for the small cutting I do away from home, but I normally use the pull hook cutter, the wire cutters on the pliers, or I need the serrated blade. I have used the knife a few times though. Because of the steel on the SOG Powerpint, I usually have a Leatherman in my vehicle backpack, or jacket pocket, just in case, if possible. I have a Leatherman Knifeless Rebar for a bag, jacket pocket or pouch carry backup and I sometimes change my SOG Powerpint for my Leatherman Rev, Bolster, or Bond, depending on what I am doing that day.

Great comparison. I was looking at both of these and decided on the P2. Thanks.

As a outdoorsman i think the awl is a must if for nothing more than boring holes in timber and maybe punching holes in a skull in self defence situations 🤔

I once couldnt baton through some hard knotty wood. Tried esee 6, ontario sp5, rtak 2 and the knife couldnt go through. When the bk 7 stepped to the plate it plowed through. Savre grind all the way

Esee learns from Becker but Becker is more stubborn to oearn from esee. Esee learned a quality from becker knives. 3 d handles. Becker still makes crappy sheaths except for the bk 18 and 19 (small blades) and crappy plastic for handles. Even without the warranty, if Becker included micarta handles and polymer sheaths. ALOT more people would huy Beckers. Also if their knives looked as cool as esee. If they did all that esee wouldn't compete as well.

I carry 2 at my job and 3 at home and among society. My reasons for carrying are both for work purposes and self defense. I've only had to use it for work only once, and I hope I never have to do it for self defense. So I guess I'm living by the "Have it and not need it, then need it and not have it" motto👍🏿

I have a Rebar, Wave+ and Free P4. The Rebar is my EDC when I'm not at work, my Wave is my work multi tool, and my Free is my spare. I prefer the Rebar over the Super Tool because my hands are not Super Tool sized.

I have both. They are really tough knives, but they are extremely prone to rusting.

I’m a bit tardy to the party but my input is that lockbacks are better than liner locks when they’re brand new but wear a lot more over time. I have a spyderco Endura with the Emerson wave and it won’t stay open anymore after 2 years of daily use.

Dave Canterbury is a Nazi, as are all military-aligned people 'under the hat'. It is a very beta expression and unacceptable.

I never owned a Delica but I do have a couple of Enduras and I used to own an Endela. I've go three Native 5s. A linerless S30V, an S110V in G10 and a LW in CPM-SPY27. I've also owned three Para 3s all in the same blade steels. Gave away my G10 S30V and my G10 S110V. I only have the LW iin SPY27. For whatever reason, I've never really been into the Para 3. Bought a Benchmade Mini Grip earlier this year and I love it. Now I'm waiting for a couple of knives. They're arriving today (09/09/2023). A Benchmade 940BK-2004 Blade HQ exclusive and a 945 Mini Osborne. I've been a Spyderco guy since the 'ber' months of 2021 but this lately, I've been so much into Benchmades. You can't lose with either of those brands.

Is the MG in s30v worth the cost in 2023?

I have a BK-2, and Love it