Nice video; of there a repository of community maps? I usually play the void since it’s spareness performs better.
@No_1_really_Күн бұрын
I just want a whoop for inside in the winter can I buy the ELRS version ? I always fly FPV with DJI air units and controllers but I can’t get around the weight so o was thinking if I get the analog converter that snaps on the side of my DJI goggles and an analog controller then I can it to work
@the-happy-RC-flyer14 сағат бұрын
I do not have any experience with DJI equipment. ExpressLRS is great so good for your winter indoor whoop.
@MTY682 күн бұрын
where we can find more video about edge companion ?
@the-happy-RC-flyer2 күн бұрын
If you search my playlists you will find videos on OpenTX Companion. What is it you would like to know?
@MTY682 күн бұрын
pls guide , special function we can use for , for example model no 1 , and that nothing to do with other model , and golable function work with all model , is that correct ? my english is not good hope you get my point .
@the-happy-RC-flyer2 күн бұрын
Your English is fine. Global Variables & Special functions only relate to the model they are set in. The current model you have open. There are functions that are Radio settings and they apply to all models in your radio ie radio battery warnings, Mode type, mapping AETR for example and Radio Menu Tabs so Heli Setup can be turned off in fixed wing planes and drones.
@tariqyounus3880Күн бұрын
Appreciate, your kind reply dear bill , I used to watch your videos since long , time and now first time,get a chance to ask you question
@MTY682 күн бұрын
excllent vide , love to watch part ,
@zootsuitpenguin2 күн бұрын
Great videos they’re a huge help for me to setup my kit!
@AlexDiesTrying3 күн бұрын
I came because I wondered whether to choose cc2500 or ELRS... I might end up with a few motorized gliders, Namely one BOT and one Jolly.
@the-happy-RC-flyer3 күн бұрын
Hi Alex, if I was starting out I would go for ExpressLRS.
@alperenozgur3 күн бұрын
no way to set it to single cell?
@the-happy-RC-flyer3 күн бұрын
Yes just set the warning voltage to 3.6 volts.
@andrey-kramer4 күн бұрын
what a cute british accent 😀
@user-qf7bx9cu2y5 күн бұрын
Can I bind it to the emax hawk sport that has D8
@the-happy-RC-flyer5 күн бұрын
Yes it should.
@greasemonkeyfpv35655 күн бұрын
Hi think I need a driver not recognising my pocket
@the-happy-RC-flyer5 күн бұрын
What are you having problems with? Is your computer detecting your radio.
@abdujalilrasulmuhamedov92195 күн бұрын
How to do factory reset (radiomaster pocket elrs)
@the-happy-RC-flyer5 күн бұрын
There is not a setting to factory reset the radio. You can delete all the models and flash the latest firmware to the radio.
@jasonchoo65856 күн бұрын
Does tx16s bind to a futaba r30006sb?
@the-happy-RC-flyer6 күн бұрын
Hi Jason, I am not sure. I have checked your receiver protocol and it is T-FHSS and the MPM can bind to S-FHSS. So I do not think so.
@leepering44406 күн бұрын
Hi useful video series can you do a video on how to set up a timer for fixed wing use ? i can't find any info on the web
@the-happy-RC-flyer6 күн бұрын
This video is for OpenTX but still relevant kzfaq.info/get/bejne/gbFko7yC3JjeY3U.htmlsi=ZpcIemvd6-9DKNAy
@leepering44406 күн бұрын
Hi will check it out after many years with spektrum, radiomaster is a steep learning curve thanks for your time
@the-happy-RC-flyer6 күн бұрын
@@leepering4440 you are very welcome. It is worth learning EdgeTX. Good luck.
@stephanweidner346 күн бұрын
Thank you very much. Perfectly imperfect. 😂 I Love it.
@dynashot17 күн бұрын
thanks for your videos! one question: if i use telemetry screen for GPS Coordinates, i only get a "3-digits" number in telemetry screen. in the sensor list they displayed correctly. how can i change that?
@the-happy-RC-flyer6 күн бұрын
Have you activated GPS in Betaflight assuming you are using a FC (Flight Controller)?
@dynashot16 күн бұрын
@@the-happy-RC-flyer sure - but i am talking about Radiomaster Boxer screen
@the-happy-RC-flyer6 күн бұрын
I realise it’s not displaying correctly but it should be the settings in Betaflight.
@dynashot16 күн бұрын
@@the-happy-RC-flyer i dont think so, because in the telemetrie menue, its displayed correct. and when i use RM T16 its displayed correct in both screens
@the-happy-RC-flyer6 күн бұрын
Please check in Betaflight that GPS is activated. I have come across a problem where some FC transmit the GPS data without this option being activated. I have just connected my Taycan to the RM Boxer Crush and the GPS data is displayed correctly. Also check the sensor mine Shows the following. Name GPS Type Custom ID 0002 0 Logs activated.
@josephwatson10367 күн бұрын
Thanks again Bill!!
@the-happy-RC-flyer6 күн бұрын
You are very welcome.
@felipejose33217 күн бұрын
Could you give me some help? I would be very grateful. I sent an email to Radio Master and they did not answer me how to solve the problem. I updated my Radio Master Boxer model 4 in 1 to the latest version v2.10.3 but it is not as it was before. The Multiprotocol mode does not work. It no longer appears in the Ibus or Sbus settings. It also does not run the LRS folder or the scriptlua in the Sis folder. Some question marks appear.
@the-happy-RC-flyer6 күн бұрын
I think you have selected a different firmware version of MPM Firmware Type the options are Air, Surface & EU (LBT) And remember to download the latest Lua Script for your version of the software.
@Thiago_TS_BR8 күн бұрын
This trick can be used to find a lost drone if it is still conected. Very useful. Thankyou.
@josephwatson10368 күн бұрын
Bill, thanks for the followup. Once I realized you were most likely not using elrs, and from what I picked up from RCgroups, it was a simple manner at avoiding channel five (arming only). It's all good for now. You have been a wonderful help and I appreciate the offer of assistance. It just might come to that down the road if need be. In the meantime, stay safe, well and keep up the bloody good work Sir!! From Joe (across the pond)
@the-happy-RC-flyer8 күн бұрын
Hi Joe, I am pleased you sorted out your problem. Anytime I can try and assist let me know. It is nice knowing I am helping RC pilots all over the world. Keep well.
@stevemartin22748 күн бұрын
Hi Bill. I have been trying to use my boxer with the Lift Off Simulator. I have been through all of the calibration settings both for the boxer and with Lift Off. My pitch gimbal, right side is reversed. I have tried to invert in settings in the game but it does not seem to change anything. Any ideas please?
@the-happy-RC-flyer8 күн бұрын
Try changing the weight of the channel to -100. Please let me know if this works.
@124MPH9 күн бұрын
Thank you Brillant mate. 👏👏👏👏
@tonyloh61409 күн бұрын
Hi sir, I wonder if can help me on my sailboat winch setup. I’m using mode 2 so the throttle stick is on the left. This new servo I just received yesterday from Aliexpress is not responding to the lower sticker throw below zero on the control. It only move above zero on the stick. I hv no issue with other servo. Need your advice. Thanks.
@the-happy-RC-flyer8 күн бұрын
Hi, could you please let me know which receiver you are using and which channel connecting the new servo to.
@CraigRoach-f1c9 күн бұрын
This solves the problem I had. Thank you so much.
@MichelleSmith-ce2qm10 күн бұрын
Hi phil quick question for you. I just brought the radiomaster tx16s 4in1 im flying edf jets which wing type meant to be 1aileron and 1flap setting but how can this be done on the tx16s ? Also how do i do a default reset as im deleted some items off my tx16s and need them back thanks
@the-happy-RC-flyer8 күн бұрын
Michelle, you can factory reset your radio but you will lose all settings and models. Which items have you deleted? With a delta model you can set up with the model wizard. Check my playlists for setting up a delta / flying wing model.
@josephwatson103611 күн бұрын
Wonderful video. One problem. I am dead in the water with getting both flaperons to operate correctly. Regardless of input direction (within the 5 channel Elrs receiver) or within the Boxer's outputs settings, and playing with variations on the +/- direction settings on the weights, the best I can do is get the left flaperon to behave correctly (lower), but the right flaperon deflects upwards. I know you're busy, but any help would be most appreciated. To facilitate any assistance you might be able to provide, I can provide you with the Companion file with all the settings contained therein. I was the individual who had said you were doing a "bloody good job Sir" from across the pond. Any help would be gratefully appreciated.
@the-happy-RC-flyer8 күн бұрын
If you can back up your radio and model settings and email it to me I will take a look for you. Getting the correct moment of the surfaces can be tricky. [email protected]
@timschannel692512 күн бұрын
Hi Bill, thanks for the great video. I have two Turnigy TX's and decided to do the USBtiny installation on both of them. The first one loaded OpenTX without issues - and works perfectly. The second one (done by the same method) has a strange fault. Open TX loads and verifies correctly (using EEPE), but the MENU button doesn't function at all, so when OpenTX asks to do the stick calibration, this doesn't work. You can see that the potentiometer knob channel inputs work, but the sticks do not. I have actually checked the Momentary Push button (Normally Open, Closed when pushed) Switch under the MENU button, and it appears to be working properly. So I am flummoxed with this one. I have tried loading the OPENTX many times, with different options, but always the same result. Any ideas? The 9X that doesn't work is probably a bit newer than the one that does work OK. Thanks, Tim.
@the-happy-RC-flyer8 күн бұрын
Honestly Tim, I am not sure. You are sure your soldering has not bridged and made the conversion as your first radio it should be fine. Have you checked the settings are the same for both radios and set to the same mode?
@timschannel69257 күн бұрын
@@the-happy-RC-flyer Thanks Bill, I will re-check my soldering (again, and look more closely). I will also check the mode settings, and re-load the software...fingers crossed.
@MyTube4Utoo14 күн бұрын
I love these videos. Thank you.
@MyTube4Utoo14 күн бұрын
👍
@MyTube4Utoo14 күн бұрын
Very helpful. Thank you. I just received my Pocket several days ago, and these videos are greatly appreciated.
@MyTube4Utoo14 күн бұрын
Thank you.
@the-happy-RC-flyer14 күн бұрын
You're welcome.
@kennethwebb792214 күн бұрын
Hi bill seperate from this video I have messed my inputs up I deleted a few n there messed up how do I fix this please cheers
@the-happy-RC-flyer14 күн бұрын
Hi Kenneth, do you mean you have cleared the Inputs in you model? If so just re enter the inputs for example Input 1 Source aileron gimbal, Weight 100 and Trim ON. Or just delete the model and start again.
@wojciechtarka16615 күн бұрын
Thank you, that's very helpful. Good job! Regards!
@FuzzyBrick115 күн бұрын
I still can't get mine to work... Every time I go to calibrate it, it completes but will not roll left.
@the-happy-RC-flyer14 күн бұрын
Are you seeing the channel move on your radio check the channel monitors by loading a model and click left or right until you see the channel screen and move the gimbals.
@kennethwebb792215 күн бұрын
Hi bikk its s qx95 nit 90 lol id got that wrong ok so in clean flight receiver channel map taer2234 and the chart erea were the channels are thats aert do i need it to be aert. taer1234 i have in the jumper channels i changed them n things worked better but probkem is my stick down it reads 1156 on thrittle i think with receiver its to be 1000 to arm got or 156 cant go lower so cant arm ha im useless but ill learnt bill getting stuck im not sure what to do be grateful for any help cheers bill i do appreciate your time helping me.
@the-happy-RC-flyer14 күн бұрын
Please check my playlists for setting up a quad copter you can check your settings. Kenneth where do you live.
@tonkokx373716 күн бұрын
You have to warm to check the box by special settings of you forget that the switch wil do strange things
@the-happy-RC-flyer16 күн бұрын
Thanks for that.
@josephwatson103616 күн бұрын
As always Sir, FANTASTIC!!! I initially used an earlier video to properly set up my Boxer for a dual servo aileron plane. I wasn't fully up to speed behind the steps, especially the logical switch setup and logic (when setting up important electric motor arming). This video began to start the process of "fleshing out" so-to-speak the process of understanding, which after all, is the most important aspect that one has to derive from your videos. Bloody well good job Sir! That's coming from "across the pond"!
@wasabipet6716 күн бұрын
Hello , can I set a sound to a external speaker ?
@the-happy-RC-flyer14 күн бұрын
You could plug into the headphone jack on your radio and attach a speaker to the lead.
@TrungNguyen-xe4ue16 күн бұрын
please make a video tutorial on how to update the recommended module how to flash the radiomaster boxer 4in1 multiprotocol module in edgetx i look forward to your feedback
@user-hi5quadxplorer17 күн бұрын
I have one question ❓. I created a binding phrase on the ELRS configuration. Everything was successful and I went to plug in the RM Pocket and the SD card can't be read. I get error saying can't read SD content. Now I'm stuck again. My screen on elsr configuration is just like yours now but I can't load the new lus script without the SD card being read. What do I do now??
@the-happy-RC-flyer14 күн бұрын
I would suggest downloading the SDCard contents, format the card and copy the downloaded contents to the card.
@josephwatson103617 күн бұрын
As always Bill, AWESOME! I've been a fixed wing pilot for years in the Spektrum arena and am transitioning all by aircraft to Elrs/Boxer. Loving the learning curve and your videos are just what the doctor ordered, so to speak. You also go into Boxer setup for drones that Joshua Bardwell typically (to the best of my knowledge) doesn't typically address. Thanks again!
@stevemartin227417 күн бұрын
Hi Bill I have just started up my Boxer. I have gone through the menus etc and I have copied the first programme in the list and assigned it to position 5. I want to use this for the Lift Off flight sim. I have been through the menu's to turn off the RF modules but I can't find them anywhere. I have watched your video and yours come up on page 2 but mine are nowhere to be seen. Any suggestions please?
@the-happy-RC-flyer17 күн бұрын
You turn the Internal module under Model, Setup. Go down to Internal RF Mode Off. If you turn the module on you will be able to select the protocol you want to use.
@stevemartin227416 күн бұрын
@@the-happy-RC-flyer Thanks for letting me know. I did manage to find it. I set everything up for the lift off flight sim and then found I could not get the right hand joystick to work on roll. There must be an issue with the boxer so I have applied to return it to Banggood for a refund. Everything is on hold for now. 😪
@sundarsantana17 күн бұрын
Very useful, Bill. Thank you. The documentation for Radiomaster pocket is very poor/none... Your videos are really helpful.
@josephwatson103618 күн бұрын
AWESOME!!!!!!!!!
@mariuszszczepaniak50318 күн бұрын
Thanks :) 👍👍👍
@321marcoux32118 күн бұрын
Hi Why change the toggle to 2pos doesn’t work in the hardware tab ?
@the-happy-RC-flyer18 күн бұрын
Because a momentary switch is only active whilst being held down.
@casperorluff223118 күн бұрын
i just got this controller, how did you get the trottle on the right stick
@the-happy-RC-flyer18 күн бұрын
You can take the case off and swop the gimbals over and go to the radio settings and change the mode from 2 to Mode 1. Then calibrate the gimbals. I just did this with my Boxer Crush. Only do this if you feel confident enough to do so. This video would point you in the right direction to do this. kzfaq.info/get/bejne/bdqIhNpmrJytkac.htmlsi=nMi06JBPu9JJ8e3c Or check manual for how to use the access holes in the radio to make the adjustments Then change the Mode and calibrate the gimbals.
@PradeepKumar-db9fx19 күн бұрын
⚠️⚠️I accidentally flashed the firmware file "mm-stm-serial-aetr-air-v1.3.4.0.bin" to the internal module instead of the external module. Now, when I try to bind a receiver, it only binds to the internal module and not to the external module. I attempted to re-flash the firmware to the external module, but I received an error message: "FW update error, device not responding.⚠️⚠️, someone please help me to solve this problem 🙏
@the-happy-RC-flyer18 күн бұрын
What is your internal module, ExpressLRS?
@PradeepKumar-db9fx18 күн бұрын
@@the-happy-RC-flyer it's Radio Master Boxer 4 in 1
@the-happy-RC-flyer18 күн бұрын
If you want to re flash the firmware to the MPM make sure the module is active by having it chosen in the current model which is open. Please try and flash again.
@PradeepKumar-db9fx18 күн бұрын
@@the-happy-RC-flyer I formatted the SD card twice and successfully upgraded the EdgeTX. Despite this, I am unable to flash the firmware into the external module; however, flashing the internal module works. The binding is done through the internal module, but when connecting it to Mission Planner, it keeps disconnecting and is unable to establish collaboration.
@the-happy-RC-flyer18 күн бұрын
So the internal module is an MPM and the one attached externally?
@user-hi5quadxplorer19 күн бұрын
Hi can i add multiple model to my RM Pocket? I have the ELRS VERSION and have one mobula 8 binded and want to bind a tiny hawk 3 freestyle. I haven't built a binding phrase because o don't know how. Just been binding through CLI tabs. Please help me..?😢
@the-happy-RC-flyer19 күн бұрын
I would suggested setting up your binding phrase. This video will help you update your radio and receiver firmware at the same time adding your chosen binding phrase.
@kennethwebb792219 күн бұрын
Bill can you help me setup a qx90 to a jumper t lite I have bound but my channels wrong I think I dunno only 2 stick movements visible in clean flight if you'd be so kind cheers
@the-happy-RC-flyer19 күн бұрын
Hi Kenneth, it sounds like the channel mapping on your radio please check under radio setting the channel mapping normal this will be AETR. Which channels can you see working in Clean Flight?
@kennethwebb792217 күн бұрын
Heya bill I think...I have done it I just can't arm it cheers.
@the-happy-RC-flyer17 күн бұрын
Check in Clean Flight under Modes.
@kennethwebb792215 күн бұрын
Hi bill I can't arm in receiver in clean flight thrust 1156 can't go lower so can't arm can you help cheers oh it's a qx95 not the 90 thanks
@the-happy-RC-flyer14 күн бұрын
@@kennethwebb7922 you need to check you armed channel is set up correctly in your radio. I do have a complete set of videos showing you how to completely set up you quad copter. Please check my playlists.