Hi Lynn - the cap kit is not included in the box, but Texmac frequently offers package deals with machine, cap sewing kit and other items such as starter kit and additional hoops. Send your inquiry to happyjapan.com/contact for deals and pricing.
@Darktow3rАй бұрын
Can you use a stylus on the screen for easier usage?
@TexmacHappyEmbroideryMachinesКүн бұрын
Yes! It's actually better to use a stylus if that's your preference.
@ramonamckee5367Ай бұрын
Thank you for always providing great training videos!
@TexmacHappyEmbroideryMachines28 күн бұрын
Rene here. I just noticed the video is washed out - I'm going to re-output it without the brightness adjustment so all the detail isn't lost. Thanks for the nice words. Hope you are doing well with the machine, Ramona!
@ramonamckee5367Ай бұрын
That's exactly how I did it. Running a couple of large files I lost the game of thread chicken and ran the cone empty.
@joelcackowski3940Ай бұрын
Thank you 🙏🙏
@BabinstakАй бұрын
does it come with digitized designs software, and training
@TexmacHappyEmbroideryMachinesАй бұрын
Hello! Great question! The machines do come with 100 free stock designs, and with your purchase of the machine from Texmac, you get free classroom training and support at any of our training locations plus live online classes twice weekly.
@toofast4149Ай бұрын
What is the maximum length and width you can embroider hats on it ? i have a happy hch 701
@TexmacHappyEmbroideryMachinesАй бұрын
The HCH-701 has a maximum embroidery area on caps of 67mm H (add up to 10 to that with the "expand cap limit" setting) x 290mm w (2.7" H x 11.4" W)
@toofast41492 ай бұрын
The videos you offer are amazing and help alot. But please.. PLEASE do something with the quality of the video, at last 720p :| Thank you.
@TexmacHappyEmbroideryMachinesАй бұрын
Thank you for the constructive criticism! The webinar video quality is controlled by the strength of the Internet connection. We are shooting with 1080P cameras but that day, but the camera throttles down the video quality if the internet connection is less than ideal.
@johnnydjjohnny73252 ай бұрын
Ball cap what size of needle to embroidery?
@TexmacHappyEmbroideryMachinesКүн бұрын
75/11 sharp point is the most commonly used for embroidering ballcaps with these machines. It is also the common needle for most other types of garments, so there is no need to change needles when switching between embroidery on flat goods and embroidery on ballcaps.
@lynnemmons92502 ай бұрын
how did you make the patch?
@TexmacHappyEmbroideryMachinesКүн бұрын
We embroidered the patch with the same machine. In reality, we could have just placed blank pieces of twill on the machine, then embroidered the patch and border all at once instead of pre-embroidering the patches ahead of time.
@bevyjeanheyrman85372 ай бұрын
Rene, you always give such good instructions with how to maintain our machines.thank you for all these videos.
@TexmacHappyEmbroideryMachines2 ай бұрын
Bevyjean, we miss you! Hope you are doing well in the UPI !
@Lucky7Graphix3 ай бұрын
Is there anyway to reset the sash to lineup with the A and B points?
@TexmacHappyEmbroideryMachines3 ай бұрын
I shared the procedure with you on FB. How is your machine doing ?
@NoeliasDesign-jv7tf3 ай бұрын
What about the C point error?
@TexmacHappyEmbroideryMachinesКүн бұрын
Just press OK and Auto and the main shaft will automatically rotate to C point.
@keejayflores75833 ай бұрын
what is that plastic material?
@TexmacHappyEmbroideryMachines3 ай бұрын
It's called Filmoplast. It's a heavy-weight water-soluble topping. You can buy it from www.texmacdirect.com
@CovenantPrintingCo3 ай бұрын
Thank you so much! Such a great help.
@TexmacHappyEmbroideryMachinesКүн бұрын
Glad it helped!
@CovenantPrintingCo3 ай бұрын
Thank you so much!
@TexmacHappyEmbroideryMachinesКүн бұрын
You're welcome!
@JuliusMolave4 ай бұрын
Hi can anybody share on how to go about embroidering a 2 line text format or design. The built screen seems not to support this and I can't find any video that addresses this. Thanks
@TexmacHappyEmbroideryMachines3 ай бұрын
If you have a touchscreen machine, you can do this in Layout mode. Look for the video on this channel discussing how to use Layout mode.
@JuliusMolave3 ай бұрын
I found the video. Thanks. How about adding fonts to the touch screen, is that possible? If yes, is there an instructional video as well?
@jdsan26365 ай бұрын
this is awesome! what time of plastic material did you use?
@TexmacHappyEmbroideryMachines4 ай бұрын
The water soluble clear backing was a heavy water soluble topping from Gunold called Filmoplast.
@samthehombre6 ай бұрын
I can’t wait to get this machine. I’m hoping you guys come out with a multi head of this soon!
@victorlugo81306 ай бұрын
😢How I can see with More detail ,the steps for installation the bobina in to the box? all videos show very fast AND i did not see correctly 😢
@ArcadioGayoGonzalez-ff1dg6 ай бұрын
Tres Bonne Machine 👍🙂
@blhtml7 ай бұрын
What needle and thread you recommending? My second question how often you oil the bobbin shaft?
@TexmacHappyEmbroideryMachines6 ай бұрын
Generally most people are using 40-weight polyester thread with a 75/11 sharp point needle. No need to oil the bobbin shaft, but it is necessary to oil the race of the rotary hook roughly every 100,000 stitches.
@blhtml6 ай бұрын
@@TexmacHappyEmbroideryMachines thanks for answer: Organ Needles 11 working fine at the moment, I order Groz-Beckert 11/75 we see how they hold up, I order 60WT bobbin thread, 40WT I need to refill my bobbin very often
@blhtml6 ай бұрын
@@TexmacHappyEmbroideryMachines I have another question I couldn't find answer too: my Happy HCS-1201-30 have German language installed, is there a English language pack I can download?
@unspeakable29637 ай бұрын
code e 131 drive not ready
@TexmacHappyEmbroideryMachines7 ай бұрын
Hello, please contact the support department of the dealer you purchased your machine from for help. We hope you get this issue resolved expeditiously!
@abdulhaleemghori73227 ай бұрын
I love Texmac and Happy Machines Best Regards, From Pakistan
@mariamartinez65407 ай бұрын
Any tutorials for installing shoe clamps and program it in happy embroidery machine? 🙏🙏🙏 I’m not able to find anything 😢
@TexmacHappyEmbroideryMachines7 ай бұрын
Hello! We are constantly adding videos so hopefully soon we will have more examples on how to use our accessories with your machine! In the meantime, customers who bought their machines from Texmac can take advantage of the free training and support resources to learn how to to do this and more...
@StrongEnoughMusic17 ай бұрын
Answer your phone! Dang, Im going to buy my next machine somewhere else
@user-tf4sg8in1n7 ай бұрын
THANKS FOR ALL YOU VIDEOS TO SHOW US HOW WE CAN MAKE MAINTENANCE ON OUR MACHINES BUT I NEED TO SEE IF YOU HAVE ONE HOW CAN I CHECK THE UPPER AND LOWER DEAD POINT ON MY MACHINE HCS2 THANK
@embroidermyname7 ай бұрын
Very helpful thank you 😅
@user-dr1rt1lq8z7 ай бұрын
Who set up the files to do multiple patches on the large frame. I am looking for someone to do that.
@znick60038 ай бұрын
I bought the HCS3-1201-30 model. I wanted to connect wirelessly with WIFI, so I bought and plugged in the wireless LAN card USB. However, the embroidery machine does not get any WIFI signals. Can you explain the wireless LAN connection?
@stephanblack45588 ай бұрын
Good advice sir.
@therajas43798 ай бұрын
How does this work on happy voyage machine's please.thank you
@andreeagociaa49228 ай бұрын
Hi, how can I move the pointer? I want it to be on centre.. but i don t know how
@andreeagociaa49228 ай бұрын
Hi, how can I move the pointer? On centre..?
@michaelfisher87479 ай бұрын
Can the machine do chenille?
@timotheebroos29489 ай бұрын
4 hours ! 😅
@wandaquinn492210 ай бұрын
Very helpful!
@morzsiHUN10 ай бұрын
What is the part number for the presser foot, or where can this information be found?
@tonyachester201110 ай бұрын
Thank you, Rene! The control panel is really easy to navigate through. I'll be making the suggested changes you advised.
@TexmacHappyEmbroideryMachines10 ай бұрын
Glad you like it! More videos coming soon on more in-depth use of the control panel
@bhanukhaladkar73810 ай бұрын
Great tutorial. Thanks Question. Is it necessary to check the gap on every needle?
@reeltimenw11 ай бұрын
What type of thread does the happy use? Yours looked like Madera polyneon classic 40???
@TexmacHappyEmbroideryMachines11 ай бұрын
Yes, the machine in the video is using Madeira polyneon 40-weight thread, which works very well with the machine. Happy machines work well with embroidery thread like Madeira that's made for commercial machines. Just make sure, no matter what thread you purchase, that you follow good procedure in setting up and testing tension for that thread and matching it with an appopriate needle (for example, 75/11 or 80/12 sized needles generally work well with 40 weight thread.
@dennisa588111 ай бұрын
*Promo sm* 😕
@vickijd2211 ай бұрын
Hi Rene. I have the HCD2-1501 and have been recently been having terrible problems with needle breaks on ball caps. So, I am checking everything. Two things that I found with my machine. One is that the L shaped brackets cannot possibly be flush with the front as shown in this video. They are pushed ALL the way back, impossible to go any further, and yet they are not flush. Secondly, I tried to adjust the set screws on the inside of the drum of the cap driver. Again, it is physically impossible for the cap driver to even touch the arm, as it will not allow it. The oval openings on my machine, do not have as much wiggle room and appear to be smaller. I was able to lower it a bit, albeit it was only maybe a couple of millimeters. I tried this because even before I found this video (which is fantastic!) I was looking at how high the driver rode over the arm; it looked abnormally high compared to my Brother machine which almost looks like it is laying on top of the arm, but is not. I am in the Happy group and reached out for help a couple of times with this needle breaking problem. You can respond in either place when you get a chance. Thanks so much for all that you do!
@vickijd2211 ай бұрын
Something I just noticed is that I have rather large washers around all my screws in the drum. This is blocking it from being able to move up and down further. Do you think that I can take them off? In this video, it looks like this machine either has very small ones or none at all. Thanks.
@TexmacHappyEmbroideryMachines11 ай бұрын
Hi, Vicki, Rene here. I think I saw your post on Facebook. Call or text me at 980-230-2841 and we can find a time to go over that cap driver or shoot me an email at [email protected]
@asebetesfaw691311 ай бұрын
how to get this machine
@ChasityPratt Жыл бұрын
Why didnt the colors work?
@spiderjuan412 Жыл бұрын
Hello, do you guys offers mechanic course for happy japan embroidery machine?
@charmainecansino2746 Жыл бұрын
Hello! Im interested in purchasing! Do you ship to Toronto, Canada?
@TexmacHappyEmbroideryMachines Жыл бұрын
Hi, Charmaine! Yes, we do! Send an inquiry to our webform happyemb.com/info.php and a salesperson can reach out to you with all the details. Ask about any specials we have going on, too!
@reeannlou Жыл бұрын
I need helpon how to operate with hcs-1201-30
@TexmacHappyEmbroideryMachines Жыл бұрын
Contact the dealer that sold the machine to you for training. If you bought the machine from Texmac for example, take advantage of the free training that comes with purchasing from Texmac.
@samthehombre Жыл бұрын
What are the benefits of a servo and non-servo? Stitch quality wise?
@TexmacHappyEmbroideryMachines Жыл бұрын
Hi, Sam, good question! The HCD servo is new, but the current multi-head versions of the HCD (called the HCR3 series) have been running servos for 7 years now, so we have some history. There shouldn't be any appreciable difference in stitch quality - all model HappyJapan embroidery machines can all achieve very high stitch quality with very little to no difference in output between all the models, provided everything is set up correctly. However, with the servo models, we have found that the machines can sew more easily through more challenging projects (such as stiff trucker-style ballcaps). This translates to more trouble-free setup for jobs like this and more trouble-free production. There is also a productivity gain with servos which we will be measuring in upcoming videos.
@samthehombre Жыл бұрын
@@TexmacHappyEmbroideryMachinesthank you for the reply! Would love to see it do some hats. That’s all I do. I’ll also be at the Expo in Long Beach next month. Will the servo version be there?
@carolchatmon9433 Жыл бұрын
I noticed on the 12 needle the hoop was jumping around a lot