21 күн бұрын
Ай бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
6 ай бұрын
6 ай бұрын
11 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@AnthonyTori 2 күн бұрын
What did you air down to?
@bobvincent4841 2 күн бұрын
I went down to 12 but made sure I didn't turn unless i was moving. The lower, the better on sand like that. I've been as low as 10 but debeaded right front when i dropped off a foot and a half tall sandy ledge at lake McConaughy. Another not so desirable problem that happens when playing in deep sand is that sometimes you end up with sand imbedded in the tire bead that, in time, especially if you haul heavy stuff occasionally, will chew up your aluminum wheel lip when the tire makes it's natural compressive shape changes with every rotation.
@bobvincent4841 Ай бұрын
www.chinaift.com/ Above is the link to the Shandong mower company that I got this little skidder from and there is another link below to the Alibaba site i used. Jessica Chen is the gal that answered all my questions and helped my with the purchasing and shipping processes. I HIGHLY RECOMMEND this company and Jessica. So far they have done everything they say they would do, and have quickly sent additional parts that i needed. Again, I have no problem highly recommending this company and Jessica Chen! Machine with counterweights and a reliable 25Hp Honda v twin and 11 attachments was a little over 18 grand with DDP shipping and delivery right to my door, and all the fees taxes, that they took care of, which in total, was only about a 3rd of what big name machines with similar equipment would be! Thanks for watching. I will be posting a review video very soon. I have almost 30 hours on this unit at time of this video. Get a mini skid steer shipped to your door using the link above, or this Alibaba link below. www.alibaba.com/product-detail/Factory-Low-price-Crawle-grapple-stand_1601090152045.html?spm=a2747.product_manager.0.0.5a3e71d2eYuDlX
@bobvincent4841 Ай бұрын
www.chinaift.com/ Above is the link to the Shandong mower company that I got this little skidder from and there is another link below to the Alibaba site i used. Jessica Chen is the gal that answered all my questions and helped my with the purchasing and shipping processes. I HIGHLY RECOMMEND this company and Jessica. So far they have done everything they say they would do, and have quickly sent additional parts that i needed. Again, I have no problem highly recommending this company and Jessica Chen! Machine with counterweights and a reliable 25Hp Honda v twin and 11 attachments was a little over 18 grand with DDP shipping and delivery right to my door, and all the fees taxes, that they took care of, which in total, was only about a 3rd of what big name machines with similar equipment would be! Thanks for watching. I will be posting a review video very soon. I have almost 30 hours on this unit at time of this video. Get a mini skid steer shipped to your door using the link above, or this Alibaba link below. www.alibaba.com/product-detail/Factory-Low-price-Crawle-grapple-stand_1601090152045.html?spm=a2747.product_manager.0.0.5a3e71d2eYuDlX
@bobvincent4841 Ай бұрын
www.chinaift.com/ Above is the link to the Shandong mower company that I got this little skidder from and there is another link below to the Alibaba site i used. Jessica Chen is the gal that answered all my questions and helped my with the purchasing and shipping processes. I HIGHLY RECOMMEND this company and Jessica. So far they have done everything they say they would do, and have quickly sent additional parts that i needed. Again, I have no problem highly recommending this company and Jessica Chen! Machine with counterweights and a reliable 25Hp Honda v twin and 11 attachments was a little over 18 grand with DDP shipping and delivery right to my door, and all the fees taxes, that they took care of, which in total, was only about a 3rd of what big name machines with similar equipment would be! Thanks for watching. I will be posting a review video very soon. I have almost 30 hours on this unit at time of this video. Get a mini skid steer shipped to your door using the link above, or this Alibaba link below. www.alibaba.com/product-detail/Factory-Low-price-Crawle-grapple-stand_1601090152045.html?spm=a2747.product_manager.0.0.5a3e71d2eYuDlX
@siraultman7631 6 күн бұрын
Could you have saved money going directly through Infront instead of alibaba?
@bobvincent4841 6 күн бұрын
I think I could have
@bobvincent4841 Ай бұрын
www.chinaift.com/ Above is the link to the Shandong mower company that I got this little skidder from and there is another link below to the Alibaba site i used. Jessica Chen is the gal that answered all my questions and helped my with the purchasing and shipping processes. I HIGHLY RECOMMEND this company and Jessica. So far they have done everything they say they would do, and have quickly sent additional parts that i needed. Again, I have no problem highly recommending this company and Jessica Chen! Machine with counterweights and a reliable 25Hp Honda v twin and 11 attachments was a little over 18 grand with DDP shipping and delivery right to my door, and all the fees taxes, that they took care of, which in total, was only about a 3rd of what big name machines with similar equipment would be! Thanks for watching. I will be posting a review video very soon. I have almost 30 hours on this unit at time of this video. Get a mini skid steer shipped to your door using the link above, or this Alibaba link below. www.alibaba.com/product-detail/Factory-Low-price-Crawle-grapple-stand_1601090152045.html?spm=a2747.product_manager.0.0.5a3e71d2eYuDlX
@bobvincent4841 Ай бұрын
www.chinaift.com/ Above is the link to the Shandong mower company that I got this little skidder from and there is another link below to the Alibaba site i used. Jessica Chen is the gal that answered all my questions and helped my with the purchasing and shipping processes. I HIGHLY RECOMMEND this company and Jessica. So far they have done everything they say they would do, and have quickly sent additional parts that i needed. Again, I have no problem highly recommending this company and Jessica Chen! Machine with counterweights and a reliable 25Hp Honda v twin and 11 attachments was a little over 18 grand with DDP shipping and delivery right to my door, and all the fees taxes, that they took care of, which in total, was only about a 3rd of what big name machines with similar equipment would be! Thanks for watching. I will be posting a review video very soon. I have almost 30 hours on this unit at time of this video. Get a mini skid steer shipped to your door using the link above, or this Alibaba link below. www.alibaba.com/product-detail/Factory-Low-price-Crawle-grapple-stand_1601090152045.html?spm=a2747.product_manager.0.0.5a3e71d2eYuDlX
@Grggeorge Ай бұрын
A friend of mine sold his mini for $800 bucks because it wouldn’t start
@bobvincent4841 Ай бұрын
Some lucky guy right there only paying 800 bucks! Wish i would've known it was selling for 800. Anyone could turn some good easy green on a deal like that!
@highsierrafarms 2 ай бұрын
Did mine last week, unfortunately before I found your video. Good job on details!
@TX_Patriot 2 ай бұрын
Sir, what tire size are you running on that beast mode PW?
@bobvincent4841 2 ай бұрын
I usually run 37 12.5 R17 Milestar Patagonia. And the barely rub. However, this last set, running in this video are the 38 13.5 R17 Patagonias. Rub a little harder on the radius arms when turning, and just tickle the front of the rear when flares when stuffed.
@TX_Patriot 2 ай бұрын
@bobvincent4841 thank you Sir. Do you think a new 2024 PW with 35's could do most of the trails you do? I'm sure with a little more scraping.
@bobvincent4841 2 ай бұрын
@TX_Patriot 35s will do most of Moab. But rock sliders should be considered mandatory. 37s just make it easy. And the new trucks with the 8 speed can handle towing and crawling with 37s with ease. I recommend installing a pulsar so you can set your own tire size and keep tranny happy and your speedo telling the truth.
@TX_Patriot 2 ай бұрын
The only thing holding me back on the 37's is rubbing, but honestly, I'll being doing most of my crawling with my Jeep. Thanks for the Intel on the Pulsar! I installed a JL Mini on my Jeep for tire size and gears. Definitely a must have!
@TommyPizzavonni 2 ай бұрын
Loool deere boys be whack
@bobvincent4841 2 ай бұрын
Get your machine and all it's attachments ordered and shipped right to your door DDP, right here with this Alibaba link in the description! Be sure to ask for Jessica Chen. She will answer so your questions promptly, and make sure that you are taken care of! I highly recommend this seller, and i know from personal experience that If there is a problem, they will quickly make it right. Bob- Nebraska
@bobvincent4841 2 ай бұрын
Get your machine and all it's attachments ordered and shipped right to your door DDP, right here with this Alibaba link in the description! Be sure to ask for Jessica Chen. She will answer so your questions promptly, and make sure that you are taken care of! I highly recommend this seller, and i know from personal experience that If there is a problem, they will quickly make it right. Bob- Nebraska
@rafaelmr76 3 ай бұрын
What about 2015 lonestar 3.6 same place?
@bobvincent4841 3 ай бұрын
If it's a 2500, I would bet so. But i would crawl under there and feel for that big round ring and those fuel lines to verify before you go cutting up your bed. I was able to locate my pump with 100% confidence and measured things so that i cut correctly and you can too. Whether your pump is in the same location or not, it will look like mine in the video so visualize the top of my pump a for when you are reaching up and feeling around for yours. Good luck!
@zoart9335 3 ай бұрын
Nice straight to the point, complete and easy to understand. Good audio, good camera work. Hope your channel grows as it deserves.
@richarddones4011 4 ай бұрын
Many thanks. Now I can change my Mini excavator to SAE other than the ISO.
@jtsokiehobbyandadventures6666 5 ай бұрын
I've been using 7/8 bolts because in my HT10b 1inch was to large. If the 7/8 to small and has play. Get 3/4 conduit from electric and cut down the middle and put on bolts
@gopackgo69 5 ай бұрын
Love it brother
@bebo5558 5 ай бұрын
Yeah, these "dealers" get a pretty big head and think they can charge whatever they want to and we're not smart enough to find it cheaper!
@pete926 6 ай бұрын
1" rod and a couple of hair pins would have been cheaper.
@jtsokiehobbyandadventures6666 6 ай бұрын
I had to do mine about 2 years ago. Sold yhe h10 b now need to dobon my new diggit em15.
@redbone7040 6 ай бұрын
👌
@ekimnamdets6946 6 ай бұрын
Fluid power is a hell of a drug. What type of engine and pump do you have? I’ve seen some with a 2cyl briggs which I was shocked about, I have my concerns about the hydraulic pump though.
@bobvincent4841 6 ай бұрын
I don't know what the pump is, but the engine is a Briggs and Stratton 13 horse
@jtsokiehobbyandadventures6666 6 ай бұрын
I picked up some heavy crap with mine
@huhcom 6 ай бұрын
I have the FF13 version of this brand. I'll be switching mine. Unfortunately, I have to remove the cab.
@kevinhorsley8372 6 ай бұрын
Do you have any counterweights mounted on that machine?
@bobvincent4841 6 ай бұрын
I did not. I just sold the mini excavator in this video. It was an earlier model with sheet metal all around. There was a few little plates that the manufacturer had bolted down inside the panels, on the floor for ballast but nothing else. I just bought another one a few days ago and this new one does have an actual cast weight that surrounds the rear end like a little rear bumper.
@kevinhorsley8372 6 ай бұрын
I just bought this same machine yesterday. So glad that i found your channel. Where are you buying your attatchments? How did you turn your mechanical thumb into hydraulic? Thanks.
@bobvincent4841 6 ай бұрын
Hunt around on Ebay. I boughta hydraulic thumb kit, rake, tilt bucket, and quick coupler from Guangtop, on eBay. You have to haggle for the best price, but they will lower price.
@kevinhorsley8372 6 ай бұрын
I can not thank you enough for this video, and the comments, which made it even easier to understand. I have tried to learn the excavator control pattern, but after using the backhoe one for so long, it seems almost impossible to relearn. Now I can switch it to what I am comfortable with. Thanks again.
@bobvincent4841 6 ай бұрын
You're very welcome!
@kevinhorsley8372 6 ай бұрын
@@bobvincent4841 I got it swapped out changed around. Easy peasy. Now I look like I actually know what I'm doing when I operate the machine.
@metaspencer 6 ай бұрын
I've gotta say that little thing has some POWER
@scottwhite5924 7 ай бұрын
Thanks so much! So happy to have John Deere controls now!
@bretthall3845 7 ай бұрын
I was able to do this on my John Deere 35 g without removing the frame from the body. I used 2, 3 ft bar clamps clamped to the bottom rail. I pushed down on the clamps rotating the track enough to slip the window in.
@dylanradmore7267 7 ай бұрын
Do not do this on a 4th gen 1500 with a crew cab and short box...can confirm 😂😂🥲 now I'm installing a friggin marine cover hatch so my bed doesn't have a hole in it for no reason 😂😂FML
@dylanradmore7267 7 ай бұрын
Mine was a 2016 slt 5.7 for reference
@bobvincent4841 7 ай бұрын
Oh man. Daggumit
@taylorellenberger3386 7 ай бұрын
Wish I had seen this 20Min sooner
@dudleydorite7678 11 күн бұрын
Thanks for the heads up. I was gonna measure it anyways 🤷.
@MasuryInsaneAsylum 7 ай бұрын
Bob! This is EXACTLY what I need to do to my H12. Just got it today and want to change to JD pattern like my backhoe. I understand the concept of what you did but you didn’t SHOW EXACTLY which lines were switched and where on the valves! Noobs like me need to actually SEE what you did step by step so we don’t mess anything up. I wish you had showed EXACTLY which lines were swapped and WHERE they were reconnected to…….
@bobvincent4841 7 ай бұрын
I'm glad this will help you. So i thought there may be a possibility that each variation of machine could have lines ran differently so i kept it brief but the main thing to do is this: Follow the two hydraulic lines coming from each of those two main cylinders, 4 lines in all, then mark them where they are with a zip tie or magic Marker and take a picture of it as it is. Then switch both top lines. Then finally switch both bottom lines with each other. Then tighten all 4 hose connections, screw the 2 main control sticks back in a few rounds, fire it up, and carefully test the operation making sure you are clear and safe. The hydraulic lines are really easy to see and to trace. Hope this helps.
@MasuryInsaneAsylum 7 ай бұрын
Ok! I think I got exactly what you mean now. That did help clarify it in my mind for me and I appreciate the response! I will take it apart tomorrow and trace those lines. The top lines stay the top lines and the bottom lines stay in the bottom positions just changing the valves then. Pretty sure I can figure that out now. 👍
@bobvincent4841 7 ай бұрын
@@MasuryInsaneAsylum close, i DID NOT move any valves. I did unscrew and move 4 hoses, 2 from this side, and 2 from that other side, just swapped them around. They were a little fun to fish through all the other hoses but not difficult at all. Good luck.
@MasuryInsaneAsylum 7 ай бұрын
Yup! I figured out what you did Bob. That wasn’t hard at all. Third over from right side hoses get swapped with second from the left. Got it! Now it matches my backhoe and much easier for me to run. Thanks for the video!
@casey3091 7 ай бұрын
Thanks man
@pauljanssen7594 8 ай бұрын
Yes I've done that many times ☺️ Young fearless.
@christophersmith0865 8 ай бұрын
No bull standing around or bull shitting, just hard work. Good job Gents, but you knew that already. 😉
@brianfrance6283 8 ай бұрын
there are no safe spaces in this world. Good job.
@donbates9532 8 ай бұрын
And that is how it's done.
@niko_bean 9 ай бұрын
that's slicker than owl shit my friend
@portcharlottepyro3120 10 ай бұрын
My fuel lines are leaking and I have been thinking about jacking up the bed but this looks like the way to go. The pump is fine for now but if I take it somewhere they are gonna drop the tank, replace the pump, and fix the lines. I can do this fix the lines then do the pump when needed. Thanks man
@kelvincarr9099 10 ай бұрын
Nice Im going to do this. Where did you buy the fuel pump??
@bobvincent4841 10 ай бұрын
Electric Fuel Pump Assembly for Ram 1500 2012 Ram 2500 2011-2018 Ram 3500 2013-2017 a.co/d/6MHniqT Amazon where I got mine.
@gungeternal4119 10 ай бұрын
you wouldn't happen to be a jehovah's witness would you?
@bobvincent4841 10 ай бұрын
I am. Not at first. Took a while. Heard all the typical lies about them and besides that, I'm a suspicious, skeptical, maybe pessimistic guy. Wasn't till i was losing my mom to cancer that I wanted to know why we suffer, why we die, and where we're headed. I've been up most churches, got the same answers. You need to have faith, or God works in mysterious ways etc. So the JW just came to my door and I was going to argue with them, but they patiently put up with me and answered all my questions from the Bible one by one. Of course it took some time do you see a bunch of puzzle pieces put together make the entire picture clear but my questions were answered. and more than that I learned that God is going to take care of everything Amazon due time and these Bible truths I learned have set me Free from bitterness worried or anxiety. Anyway you just asked a simple question I probably should have said yes but I thought you should know more.
@bquade70 11 ай бұрын
Hell yeah! 👍👍 Lake Havasu 🌞 Az
@rambicondan9103 11 ай бұрын
I heard there were some out there but didn't get to see them thanks
@bobvincent4841 11 ай бұрын
Hey Dan!. Ya had a little fun out here last couple days. Had to get out and go right back home as I'm sure busy with work this time of year, but was having wheeling withdrawals. It was fun, though, sure was a lot more fun when we all ran it together. I saw a few jeeps and a bunch of razors. I met no other full size running round out there last couple days. For mid July, i would've expected Moab to be busier . Just didn't seem as busy as the other times I've been here, it's weird.... On s positive note, i ran into Rory Irish, the Trail Mater guy while he was heading out of Hells with a broken jeep. That was cool 😎. Tried to film the encounter but this prize winner, this knucklehead, forgot to remove the camera lens cover! Only got the audio! Dur!!! Duh! 🙄
@michaeljay8892 Жыл бұрын
I always cut the box even before I need to replace the pump. If the truck craps out on the road ,I can replace the pump and save the tow and a big bill at the shop. And you are right the truck should have a panel over the pump from the factory.
@bquade70 Жыл бұрын
Just did mine, pulled the bed. Done is done though right? Great vid. 👍👍
@droppinbaums Жыл бұрын
These things are a pain in the A$$!!! Somehow the window came out on our excavator when I opened it. I got it back in but destroyed that dang rubber trying to fish it back in there. What a dumb design
@bobvincent4841 Жыл бұрын
Have to hold your mouth just right and cuss a little lol
@astrofuton Жыл бұрын
Pointless...
@mondayfunday526 Жыл бұрын
Thanks for the Video! No need for any inline fuses? Also where did you bring power from for the switches?
@bobvincent4841 10 ай бұрын
I ended up putting power to each locker from a wireless controller that i mounted in the engine compartment. I did install a fuse for the controller. I got the 4 accessory controller from Amazon. It was something like 40 bucks.
@eduardojimenez8314 Жыл бұрын
GO RAM OR GO HOME !
@ConnerV 2 жыл бұрын
😩🥵