Пікірлер
@thegaulbegaul 23 сағат бұрын
When a beamer comes into the shop the "not it" happens everytime.....And not a bad little hack there. Its good to show people you dont have to put off vital servicing of your car because you dont have this or that.
@nathanoikarinen Күн бұрын
I’ve used a large adjustable wrench and even channel locks but this seems a lot less likely of it breaking lol
@TenzaMotorsports Күн бұрын
I’ve used adjustable wrenches before! As long as someone didn’t crank it down, a crescent wrench will work.
@AaronFernandes__ Күн бұрын
Wait was that an electric hand held screw driver? I need one of those lol. Great idea btw 👍🏼
@TenzaMotorsports Күн бұрын
Yes! Worth every penny of the $35. It’s a craftsman. Doesn’t have a ton of torque, but it’s a life saver when doing hose clamps and interior trim. I use it all the time.
@michaelc9128 Күн бұрын
Why don't you just buy the proper tool and keep it in the trunk of the car for later use
@TenzaMotorsports Күн бұрын
I explained that in the beginning of the video.
@lukelee4974 Күн бұрын
How much can I buy that
@matthewshadd4083 Күн бұрын
I got the same oil cap and an oil cooler, but it’s leaking from the oil cap top the part tht sandwiches together Any idea why it could be
@TenzaMotorsports Күн бұрын
Gasket on the top is probably bad. Only downside to any system like this. Pull it out and get a good replacement.
@matthewshadd4083 Күн бұрын
I thought so just wasn’t a 100% sure called drift Hq they said they are trying to source a replacement o ring as the are out of stock tried auto part stores near me none of the can match it
@matthewshadd4083 Күн бұрын
@@TenzaMotorsportsand love the video this one and the valve cover especially pulled the trigger on these two things because of your videos keep it up
@TenzaMotorsports Күн бұрын
Definitely not trying to talk down on these products. Good designs and can’t complain about the price. But they only place they fall short is the gaskets. Like you mentioned, the valve cover and others like the fuel pressure regulator. I always just get new gaskets. Not a huge deal. I find AC/freon gaskets work really well.
@bhcrls1 Күн бұрын
Nice work.
@TenzaMotorsports Күн бұрын
Thanks!
@alexandermcdole8464 2 күн бұрын
I know this video is old, but the royal purple has been great and my cammed ls1.
@kylepatton2423 2 күн бұрын
Haha, you said "bunghole". Lol, bungholio
@TenzaMotorsports Күн бұрын
lol I rewatched it and I can see what you mean!
@courtneyedwards2252 2 күн бұрын
My bmw connected drive doesn’t work with this. Any suggestions?
@TenzaMotorsports Күн бұрын
I’ll be honest. I’m not sure what connected drive is.
@yeska420ne 2 күн бұрын
Amsoil sucks use Motul oil
@filoniz 2 күн бұрын
Correct me if I am wrong but engine oil are there to lubricate not clean the engine? Are you just making assumptions?
@TenzaMotorsports 2 күн бұрын
You replace engine oil to keep it clean. The engine is supposed to be clean. Assumptions about what?
@dominicpedro1403 5 күн бұрын
Let me get your old Sulev gas tank
@TenzaMotorsports 5 күн бұрын
I wish I still had it! I tried to find someone who needed it for years. Finally threw it out last year.
@dennistonbrown254 5 күн бұрын
Never mentioned the type of fabric...
@TenzaMotorsports 5 күн бұрын
It’s just a random black fabric. It only has to have one property. It stretches one way but not the other.
@elipugh6703 6 күн бұрын
I know it's a race car, but instead of running wires from your regular taillight, tap into the harness directly from the 3rd light plug, rerouting it up through the pillar/hatch & securing it above so if needed, you're not disconnecting it every time you need to jump in the engine bay? A bit late for stripping extra weight, but the stock muffler is quite heavy between 35-40lbs, I noticed it in my 986 when I dropped it & made a custom stainless exhaust. Compare 5lbs to 40lbs, it's a similar system as the tarret race exhaust, just add a couple reversed in-line resonators to smooth out the raspiness.
@TenzaMotorsports 6 күн бұрын
That’s what we did. We ran wires from the third brake light. We showed how to do it both ways just in case they don’t have the third brake light wiring. And yes the exhaust is something that will be done differently soon!
@peskypeet 7 күн бұрын
Where is the next update video in this series?
@TenzaMotorsports 6 күн бұрын
I stopped doing them. Everybody kept bitching and complaining about the oil testing so I gave up on it.
@peskypeet 6 күн бұрын
@@TenzaMotorsports 10-4 I'll stop looking for it then. Do you think there was a difference?
@s2000. 7 күн бұрын
No anti reflective coating on the screen, the biggest issue with android units, nearly unusable during the day.
@TenzaMotorsports Күн бұрын
This one is bright and we’ve been happy with it. Had at least a week of good sun and nothing to complain about
@stevehudson9631 8 күн бұрын
Thanks for the very concise video and showing how relatively easy this task is. I have a 97 Ram 2500 diesel extended cab and will be replacing the original driver and passenger door windows soon myself, so I personally appreciate your video. One thing I'm going to do while replacing the door glass is also replacing what the factory service manual calls "inner door belt weatherstrip" and "outer door belt weatherstrip" because, like you found, these - especially the outer weatherstrips - have collected enough dirt and abrasive crap over the truck's almost 30-year life that they have scratched the glass so much and so badly they are hard to see through, especially with sunlight shining on them. I found this complete set (inner & outer weatherstrips) at Geno's Garage (just search for this name) and priced under $60 for the complete set and they're made from the same specs and materials as factory original parts. I don't know if KZfaq will let me post the real link or not, so if anyone is interested in this product, just navigate through these website links "Home > Body > Door Seals and Weather Stripping > INNER AND OUTER BELTLINE SEAL KIT - DRIVER & PASS. ('94-'02)". Like LMC Truck, Geno's is a GREAT place to find a LOT of things for Ram trucks (gas & diesel). I'm not affilliated with Geno's Garage in any way at all - just a long term, satisfied customer.
@FireicerCooper 8 күн бұрын
Yes it will skew your results as oil through a turbo gets very much hotter and oul breaks down sooner on a turbo engine
@EononOfficial 8 күн бұрын
Thanks for your sharing~
@raquelwestbrook7115 9 күн бұрын
Nice job. You make it look too easy.
@bhcrls1 9 күн бұрын
Nice looking unit!
@Richiehervig 9 күн бұрын
Replicating this custom intake today for my 01 boxster using the MaXpeedingrods kit. Excited to take on the project!
@xanderpage9655 10 күн бұрын
Trying to do this delete. But don’t have a way to tune it out. Sucks ass
@TenzaMotorsports 9 күн бұрын
You don’t have to tune it immediately. It just throws a check engine light every few weeks. It doesn’t change how the car runs. I ran almost a year with mine not tuned. I think it threw the code like every 3-5 weeks
@xanderpage9655 9 күн бұрын
@@TenzaMotorsports yeah but won’t throwing a code end up causing some kinda issue?
@TenzaMotorsports 9 күн бұрын
Nope. The computer just gets upset that you removed some emissions crap. It has no effect whatsoever to remove it.
@FutureDreamZz 10 күн бұрын
Hey! I know this is 4 years ago but I have a Honda civic at 225k miles is it possible to make the switch now? Or would it mess anything up inside?
@banginzaza 10 күн бұрын
That's all I use. Even the transmission fluid. 👍🏿👍🏿👍🏿
@juanrivas126 11 күн бұрын
Would these fit a e46 wagon or just the coupe
@TenzaMotorsports Күн бұрын
These specific ones will only fit a coupe but I think they make ones for sedan/wagon
@LETerEATRenne 12 күн бұрын
I had a e46 m3 about a year an a half ago, I sold it and regret it 24/7. I’m going to look at a parts tires m3 this weekend after I attend a track day. It’s a very complete car but since it’s a parts only title I can’t register it. I’m really considering doing something like this. I’ve always wanted a wagon with a s54. I’m sure I’ll have a fair amount of questions in the future, you’ve earned my sub, keep up the good work!
@TenzaMotorsports Күн бұрын
I don’t doubt you miss your M3. It’s the definition of perfection. This build was so fun and honestly, it was easy. Almost everything was plug and play.
@bobg3034 13 күн бұрын
NOT all the oil gets filtered that flows to the filter! Only the oil that can flow through filter media gets filter the rest is bypassed. You would need a filter much larger the filter 100% of the oil!
@TenzaMotorsports Күн бұрын
I’m not sure what you’re talking about. Never heard this.
@danrushworth7708 13 күн бұрын
Have you tried the larger n52b30 throttle housing swap?
@lallinnBESTI 13 күн бұрын
Could the reason be the weld on bungs on the "brand Name" tanks had warped beyond AN 37 deg sealing capability ?
@TenzaMotorsports Күн бұрын
Not sure what it was. I really don’t. It just makes no sense and I was done paying brand name prices for the same cheap stuff on Amazon. And the Amazon parts don’t leak… so there we go!
@dasburke 13 күн бұрын
do you know what is lighter than HMS door cards? No door cards...
@TenzaMotorsports 13 күн бұрын
This is true. But it’ll change what class you’re eligible for. I ran without them for a long time. But decided both cars should have them
@ThanasisGR 13 күн бұрын
Hi ,i bought from Italy the xpr 5w/50 and the color was bronw color not purple from new ,no use..................
@Richiehervig 15 күн бұрын
Just picked up my 2001 boxster for $2400 from auction, currently building it into a budget track car! Following your vids brother🤙
@TenzaMotorsports 14 күн бұрын
That's a good price! happy for you. Stick around, there's lots to do!
@K.E.A.9.4. 15 күн бұрын
Do not buy if you have an iPhone Pro Max. Don't buy if you have an iPhone Pro Max, it can't charge it, a useless rip-off, the battery decreases rather than it increases ahahaha
@witoldpolewaj378 15 күн бұрын
No glue on depo? You just open them without oven?
@TenzaMotorsports 14 күн бұрын
Just like the oem headlights!
@Rockhound62 15 күн бұрын
I do believe amzoil is the best.But it's double the price. And I wouldn't feel comfortable, leaving any oil in my vehicle for 15,000 miles ?
@TenzaMotorsports 16 күн бұрын
Hey, thanks for watching! This DIY set up was built out of left over parts, watch our version 2.0 where we get some actual piping and make it legit! kzfaq.info/get/bejne/nJxdfcx9z8mml58.html
@Searchin4tone 16 күн бұрын
Great review and thank you for confirming anyone can have a bad hair day.
@TenzaMotorsports 16 күн бұрын
That’s a good hair day! lol
@curtokay8046 17 күн бұрын
My 330xi is stock 14900 miles is that a good car to start
@TenzaMotorsports 14 күн бұрын
14,900?? or 149,000. just had to ask.
@armnloaded8746 17 күн бұрын
I connected the USB then with a Bluetooth aux. i gotta redo it though. I lost the audio after 😂
@marshallowens4494 17 күн бұрын
What was the total cost for this set up?
@TenzaMotorsports 14 күн бұрын
This will cost just under $300. If you use all the discounts it'll be closer to 250.
@bevinsee 18 күн бұрын
Wow! Thanks to my fam, the video explains it very clearly!!! 💪
@TenzaMotorsports 14 күн бұрын
Thanks! We have been so happy with it.
@kimgulottarappo6518 19 күн бұрын
I have a 2004 325 CI BMW convertible that’s rebuilt and the one airbag in my seat is not working right so none of my airbags are working at all because the airbag light isn’t on I’m like a race car driver and I love driving fast but my car has 1000 problems and I am so nervous driving without airbagsI took it to Bmw, but they said they were already replaced so they couldn’t fix the one that’s not working in the seat
@TenzaMotorsports 14 күн бұрын
Your air bags should be functional still, even with the light on. I remember reading about it and the light just means the car lost communication to the modules. But who am I to say if a woman has functional air bags or not 😉 I’m just a guy.
@morsaadon4379 19 күн бұрын
How did you fix the problem with tilting?
@TenzaMotorsports 14 күн бұрын
Lots of adjusting. just had someone running the bolt as I sat in the seat and moved it until it felt right.
@Recon77 20 күн бұрын
So is there a difference in the E46 M3 sway bar size vs a 330ci sway bar? Or are they the same? Asking because of budget builds.
@TenzaMotorsports 14 күн бұрын
M3 does have a larger one than a stock 330. But they aren't as big as these Hotchkis ones. And If I remember right the 330 has larger than the lower model 323 325 328
@Tycho_3111 20 күн бұрын
What’s your opinion on the e28 m5? I’ve owned one for around bit now and I must say it’s the best bmw I’ve ever driven.
@TenzaMotorsports 14 күн бұрын
I Think they aren't very good and resell is terrible. so feel free to send it to me... ill take it off your hands.. Totally kidding, I’m super jealous! I think they are one of the best bmws ever made and have aged like fine wine. I’d love to see pics of the car!
@Tycho_3111 14 күн бұрын
@@TenzaMotorsports I would love to show you! I’m not sure if you have instagram or whatever
@TenzaMotorsports 14 күн бұрын
I do. Tenza_motorsports
@coltoncastonguay3900 20 күн бұрын
Is the paint match spray good?
@TenzaMotorsports 14 күн бұрын
this one did pretty well. it really Depends on the color. Colors like jet black or alpine white, you'll be fine. Silver is a NO GO
@bucketletsgo6543 20 күн бұрын
I have a 2005 BMW E4 six 318 CI manual and I want to switch up the engine to a six cylinder set up. How much can I plug and play and is the transmission usable with a larger engine or do I need to switch it out entirely.
@TenzaMotorsports 14 күн бұрын
What transmission is it?
@DenislavStoimenov33 22 күн бұрын
Question! Do you need to have more oil, due to (I’m guessing) the oil cooler keeping oil inside? Also don’t you need some kind of a pump to get the oil flowing in the cooler? Does that make sense? 😁
@TenzaMotorsports 21 күн бұрын
Yes. I’m glad you asked. I had actually recorded a bit talking about that, but I butchered it so bad I couldn’t save it in editing. Your car will take around a quart more. But the oil changes will be the same since that extra quart is sitting in the lines and the oil cooler.