Hello, I am writing to inquire about your permission to use a short clip of your video. This is JTBC <Talkpawon 25hrs>, the Korean TV show which is broadcasted on JTBC (Korean TV channel). With your permission, I'd like to use your video to introduce performance in Ancient Roman Theater. It will be broadcasted at 9PM on 12 August, 2024. For further information, please contact us through an email.
@user-om5rg3pd9b2 ай бұрын
Quick question. Could the plug in cable not be done once the light fixture is removed..or is there not enough cable length. Thanks…very informative video. 🙂
@ocenaside1111Ай бұрын
Hello! Great question! I was afraid that I may not have enough room to unplug when the light is removed, thus I unplugged it before that. I now think there is enough cable lenght to unplug after removal of light. Best regards!
@bonfire7blue3 ай бұрын
Wow❤❤❤ Only missing is trans and other atmospheric music.
@amish10004 ай бұрын
Thank you so much for sharing this. Bless you. 🙏
@ocenaside11114 ай бұрын
You are so welcome!
@antoanetag98105 ай бұрын
🥰
@cubukluugur67775 ай бұрын
Hallo in Deutschland kostet das 3. Bremslicht 240 Euro. Bei Ebay gibt es China Bremslichter für 25 Euro. Hat schon jemand sowas gekauft? Und wenn ja, wie ist die Qualität der China Bremslicht.
@ocenaside11115 ай бұрын
Hallo! Chinesische Produkte sind nicht zu unterschätzen. Sie ähneln nicht den originalen japanischen Exemplaren, aber wenn man den Preisunterschied bedenkt (10X), es lohnt sich, die chinesischen zu verwenden. Ich wünsche Ihnen Erfolg!
@cubukluugur67775 ай бұрын
@@ocenaside1111Danke für die schnelle Antwort. Mir geht es um die Wasserdichtigkeit! Habe Angst das bei der Autowäsche Wasser an den Dichtungen durchgeht. Und ein Problem verursacht.
@cubukluugur67775 ай бұрын
Habe ein Blackedition Modell mit Dachspoiler! Da sind an der gleichen Stelle wo bei euch die 8mm Muttern sind, bei mir nur Kreuzschrauben drinnen! Jetzt weiß ich nicht wie man das Licht ausbaut!
Thanks for the video. I couldn't find the nuts as hard as I looked but I found it wayyyy easier just to take the spoiler off. 3 bolts ontop of the car and spoiler comes right off and you can access everything easier. But great video to get me started!
@ocenaside11116 ай бұрын
Glad I could help. Best!
@cubukluugur67775 ай бұрын
Hallo haben Sie ein Black Edition Modell? Bei meinen Black Edition sind auch keine 2 Mutter unter der unteren Abdeckung.
@ashpazsepid63097 ай бұрын
بسیار عالی بود آموزش دوست گرامی ❤
@ocenaside11117 ай бұрын
بسیار متشکرم دوست من! امیدوارم از banichki لذت ببرید! :)
@GenoG12027 ай бұрын
Not one person without a phone. What a lost society!!
@me-lg2ku5 ай бұрын
Womp womp
@leesagrrl8 ай бұрын
I grew-up surfing all over the Bay Area... Only full-on idiots are too stupid to respect the damn Ocean... and bringing your kids close to the action while you try to get a good picture is child abuse. Obviously she's smarter than he is.
@youtube_username_8 ай бұрын
All the laughter made me smile.
@diamona22146 ай бұрын
me too😊
@Kamala2025MFs8 ай бұрын
shirtless guy Brave & Hot AF.
@abdiver128 ай бұрын
Fantastic footage. I've spent a lot of time in Pacifica walking down that street and fishing on that pier and I've never seen the water that high. I'd love to be on the pier in these conditions, lol. I'm sure the view from the top of the cliff must be spectacular as well.
@ocenaside11118 ай бұрын
Thank you! I’ve been in the Bay Area for 35 years, and never seen the ocean that mad. Thrilling!
@1492chris8 ай бұрын
Intense video! People not showing good sense, children there ??? Max probably used the wrong term because English isn't his first language. Great video nonetheless.
@geeewiz22318 ай бұрын
humans, so easily entertained, like me here. lmho
@PaisleyGreene638 ай бұрын
After that (fool?)hardy soul stood at the fence and let himself get drenched many others didn’t seem to worry about getting wet too. ☺️
@Whatever-you-wanted8 ай бұрын
The sea was angry that day my friend…..
@ocenaside11118 ай бұрын
My favorite show! :) Thank you!
@Whatever-you-wanted8 ай бұрын
@@ocenaside1111 you’re welcome. One of my all times to! Thanks for posting 😎 was waiting for you or someone to finish it lol. I’d play along lol
@oxxxeee8 ай бұрын
do you have any idea what a tidal wave actually is?
@ocenaside11118 ай бұрын
Sure: A tidal wave is a regularly reoccurring shallow water wave caused by effects of the gravitational interactions between the Sun, Moon, and Earth on the ocean. The term "tidal wave" is often used to refer to tsunamis; however, this reference is incorrect as tsunamis have nothing to do with tides.
@amjz778 ай бұрын
People. Are. Dumb! Even with their kids!
@Whatever-you-wanted8 ай бұрын
Yep. Those waves could easily pull them in never to be seen again. Water is strong people don’t realize.
@williamturner95348 ай бұрын
Great instructions,thanks a ton.
@ocenaside11118 ай бұрын
Glad it was helpful!
@risa_sh.youtube32448 ай бұрын
Nam myoho rengekyo 🙏 pray 🌍 peace be safe
@liontitties9 ай бұрын
OMG thank you
@ocenaside1111Ай бұрын
Welcome 2x
@noelghallager467210 ай бұрын
replaced mine with a non-OEM part and it doesn't work 🙁
@ocenaside11119 ай бұрын
Thank you for your interest. In this case you need to trace the problem in the wiring between the light and the battery. Good luck!
@AlsoRatmir Жыл бұрын
Turns out it was terrible good thing I didn't go...
@hikerrobot Жыл бұрын
I found your video useful. Gave me the reassurance I needed to know that I wouldn't be damaging the plastic panels when I tried to remove them.
@ocenaside1111 Жыл бұрын
Greetings! If you remove the panels as shown in the video, there is no chance of damaging them. The only way to disengage the clips holding the panels is to pull the panels out. Hope this helps. Best!
@Ocean7Fox5 Жыл бұрын
Thank you so much!!
@ocenaside1111 Жыл бұрын
Glad it helped!
@ytyrhspce55345 Жыл бұрын
Wonderful, thank you for making this video.
@ocenaside1111 Жыл бұрын
Thank you too! Glad it helped.
@arthurcorpus9994 Жыл бұрын
Thank you, good job really helpful 👍
@ocenaside1111 Жыл бұрын
Glad it helped!
@leftercani9879 Жыл бұрын
Hi. I replace the lighter but still does not work . Maybe the sensor need to be replace too? Do you know?
@ocenaside1111 Жыл бұрын
Hi LC, I would recommend you refer to your Honda's User Manual to locate the fuse for the third brake light. If you find no info, you need to get info help from your local dealer. Best!
@deweyjenkins6682 Жыл бұрын
This video actually shows you how to do the complete job. Thank you.
@ocenaside1111 Жыл бұрын
Glad it was helpful. Thank you.
@sodapuffs Жыл бұрын
Thanks for posting this video.
@ocenaside1111 Жыл бұрын
Any time
@lostintheirishsea Жыл бұрын
Really helpful video and I saved about £60 over what the Honda garage was going to cost. I managed to lose one of the nuts when I took them off but I retrieved it with a strong magnet on the end of a coat hanger. Cheers.
@ocenaside1111 Жыл бұрын
Glad it helped. Best!
@lyndahenderson84 Жыл бұрын
Thank you!
@ocenaside1111 Жыл бұрын
You're welcome! Best!
@austinmurchinson74242 жыл бұрын
░p░r░o░m░o░s░m░ 🌹
@user-br3uk3yp3o2 жыл бұрын
Thanks
@ocenaside11112 жыл бұрын
Welcome
@eprohoda2 жыл бұрын
than kyou,how good job. see ya!.friend-
@ocenaside11112 жыл бұрын
Many thanx, P! Wow, your videos are on a whole another level. You've just got another subscriber :) Great job!
@AC-ck5xv2 жыл бұрын
Thank you for this post....I have actually a problem to remove the plastic panel...I think something is already broken...but I'll wait to be warmer outside...
@ocenaside11112 жыл бұрын
Hi AP, You simply need to me more brave and firm in pulling the plastic trim. If anything is broken, it usually caused the panel to fall out of place, not the other way around :)
@AC-ck5xv2 жыл бұрын
@@ocenaside1111 Thank you. I got it, finally.
@zacharymurdock67212 жыл бұрын
You could always remove the connector after you’ve pulled the assembly out instead of having the headache of trying to get it disconnected while its still in place.
@ocenaside11112 жыл бұрын
Agreed
@eliascalderon79502 жыл бұрын
Very good video 👏🏾
@ocenaside11112 жыл бұрын
Thank you! 🤗
@bobcooper40442 жыл бұрын
There is no need to fiddle with the electrical connecter inside the tailgate as you did. When you remove the light it pulls through to the outside and is then easy to unclip
@ocenaside11112 жыл бұрын
Agreed! This is better idea, as it eases the installation and eliminates the need of a special tool. I had to remove from the inside, as I did not pull to check if the slack of the wire will allow disconnecting from outside. Cheers!
@andyfrancis52532 жыл бұрын
I concur with Bob Wilkinson; two clip-lugs still hold light assembly until they're pushed down through the rear with a screwdriver, or the likes, you should hear a click as they release. No need for silicone nor tape, as the new assembly has a 'sponge seal' that is weather sealed by compression. The clips will also hold the light in situ while the 8mm nuts are screwed back on and tightened to complete the weather-proof seal.
@ocenaside11112 жыл бұрын
This would be the case when the clips are working correctly. My clips were not engaging. @8:10 you can see that the LED panel slides smoothly into place. No clicks. Best!
@toriedwards42702 жыл бұрын
Thank you so much! I just replaced this on my own, in less than an hour. The Honda dealership wanted to charge me nearly $600.
@ocenaside11112 жыл бұрын
You rock, Tori!!! Glad this was helpful. Best!
@cathycasto81822 жыл бұрын
Is the light is going bad its flashing when stepping on break
@ocenaside11112 жыл бұрын
Hi Cathy! Yes, any light pattern other than solid continuous light (when brake pedal is depressed) means there is a problem in the electrical supply. Before you attempt to replace anything, you should first diagnose it with by the proper specialists, and ensure any wiring system issues are resolved. There are many issues that might attribute to the brake light blinking - bad contact anywhere in the wiring, issues with the anti-lock brake system might cause brake lights to flash, or there could be a problem in the PC board of the LED panel itself, etc. One thing you can do to diagnose if the LED brake light is not your problem, is to check the plastic connector of the LED Panel (@3:02). You can disconnect it and connect it again. If your lights are still flashing, you can proceed with diagnostics or replacement. Hope this helps a bit.
@philaukscunas78202 жыл бұрын
great video, dealer wanted 210, got OEM from local shop around 130
@ocenaside11112 жыл бұрын
Nice job! Best regards!
@bobwilkinson20083 жыл бұрын
I've just replaced mine - many thanks for the tutorial. DIY much cheaper than what Honda wanted to quote. One note however: it didn't just pop off due to the 2 lugs a few inches either side of the connector which had to be pressed in and eased through the hole from within. But, because of these, the new one clicked into place and hence there was no need for the duck tape before restoring the nuts. Also, the new (red (old was white)) one came with the bolts already on. Thanks again.
@ocenaside11112 жыл бұрын
Thanks for sharing BW!
@lostintheirishsea Жыл бұрын
Thanks for this. I’d I hadn’t read your comment I’d never would have got the light out.
@TP-zt3gp3 жыл бұрын
Great video! Thanks!
@ocenaside11112 жыл бұрын
Glad you liked it!
@diannemarsh87043 жыл бұрын
and tanks for the tutorial, the counter guy who sold me the new led light said you just have to pop it off (the light). good thing I didn't force it. This is really Peter, using wife's login.
@ocenaside11112 жыл бұрын
I see you managed to remove the panel safely. Glad if I could've been of any help, Peter!
@diannemarsh87043 жыл бұрын
I have a 2016, seems pretty close to yours. I cannot seem to get the trim panel off, my hands not strong enough. Could I use c clamp maybe?
@bobwilkinson20083 жыл бұрын
Mine was also stiff but a screwdriver under the edges helped a lot.
@ocenaside11112 жыл бұрын
Using any feasible tool (preferably plastic material), that will not damage the trim, or the glass is ok. Thanks BW!