Thanks for posting this will be using it soon to replace the driver side. Luckily I have no one in my life so the passenger side will never need to be replaced.
@baus2k15 күн бұрын
I can’t get the key mechanism to come apart
@jackstonehenge29 күн бұрын
Thx so much. anybody on here know of a better aftermarket part made of something that won't break perhaps?
@sinmoto1220Ай бұрын
Rotrex is better than eaton, g60, or turbo k26?
@archerr402 ай бұрын
Thank you for this. I am starting the process of getting new handles and whatnot because both sides are starting to fail!
@rcktbny_brz2 ай бұрын
Same shit happened to mine, upgraded to the 38-94
@liambatten86972 ай бұрын
How in the heck did your interior panel come off that easy
@brendenharris74392 ай бұрын
Fixing it sounds so much better than climbing through my hatchback every single time I need to go somewhere
@diannathackwell36372 ай бұрын
We tied a strap on the door secure it with electrical tape and pulled it from the back but we got the door handles for replacement. 😂
@diannathackwell36372 ай бұрын
Sorry tied the stap onto the door handle
@LouixIskander2 ай бұрын
I’m gonna try do all the work on my crz myself. I love it and wanna learn how to take care of it.
@hjajvideos3 ай бұрын
rural japanese guy fills in the gaps but u got the american left hand drive shots that helps lol
@fastdynamicgroup68593 ай бұрын
Thanks guys
@tuntommybunsu5 ай бұрын
Is the front and rear brake pads are same and interchangeable?
@trevindegrave49595 ай бұрын
Also stock internals??
@trevindegrave49595 ай бұрын
I’m looking to get this on my 2014 frs just wondering if it’s reliable! I plan on making it a daily!
@ke6nber6 ай бұрын
Your door handle replacement video really helped me out a couple years back. Today, this video came in very handy. I watched, I changed out my pads, everything went well. Thanks.
@TommyMccoyMedia5 ай бұрын
This makes me happy. I haven't posted in ages but it's comments like yours that make me want to get back in it. So glad it helped you out! cheers hermano!
@eddieshabazz56036 ай бұрын
That's Rotrex for ya. I have their stage 3 on my yamaha apex and have put tons of miles on it. It owes me nothing. But when they first came out I put the stage 1 kit on my first apex and the charger didn't make it 100 miles before grenadeing so there are lemons and they're solid units
@GeorgeWatson276 ай бұрын
Hey man, this is a decent video but you really should clean and re-grease the slide pins to stop them jamming over time. You should also be using factory torque setting and threadlock for the caliper carrier mount bolts and the bolts from the caliper to slider. I suggest to make those part of your next video as the sliders are very important for maximising the life and performance of the discs and pads and the torques are there for safety.
@TommyMccoyMedia6 ай бұрын
I appreciate you tapping in. I have gotten rid of the z a long time ago but I appreciate your insight! Going to pin so others can see this!
@richardarenas36326 ай бұрын
Muy bien 👌🏻
@scottflores44827 ай бұрын
Is the Y spring on the back pads also?
@cristianramirez84477 ай бұрын
Hi I just bought this car for my son and he was trying to replace it but didn’t finish , so he closed the door and locked the car now they it’s not unlocking , we are stuck trying to open it any idea ?
@philippillis93937 ай бұрын
Can you remove and replace the silver indoor handle as well?
@TheNecrowpharaoh7 ай бұрын
You literally skipped the only part I needed...
@levneyman61838 ай бұрын
Many steps missed
@xdneil89178 ай бұрын
what do you recommend for a light bulb for a spec d headlight?
@user-lx4by7wm7h9 ай бұрын
Bro you videos save my freaking life
@TommyMccoyMedia8 ай бұрын
I appreciate it bro! Thanks for watching :D Enjoy your new brakes! haha.
@sam_mcl909 ай бұрын
Just came back to this video after a few years. Wasn't sure if I previously did the front or back on mine. The video immediately opened to the later half where you did the rears. Going to use the second half of this video today. That brake clip would have been the part where I started getting frustrated without the video. Thanks for the help!
@TommyMccoyMedia8 ай бұрын
So glad to hear man! Glad I could help! :D Thanks for watching!
@chuckg533710 ай бұрын
Great info!
@HotRollBrad11 ай бұрын
Electric locks make it very hard to do
@iiwaryy475211 ай бұрын
The tutorial was very helpful thank you. I wanted to ask where did you find a new door handle at?
@justincarpenter8470 Жыл бұрын
Having trouble with screwing the key lock part back in. I have the new the handle on with the bracket and rod attached inside but can’t seem to get the key lock to line up with the hole and cannot screw in the attatched part!
@hallowsoul2722 Жыл бұрын
So how do you keep it from breaking again off you can’t keep it out of the sun?
@jonathanlevesque4389 Жыл бұрын
Thx man very helpfull
@sherriniessmith3171 Жыл бұрын
Thank you for explaining this ! 8:08
@twwist_5462 Жыл бұрын
I like the part where half the bolts were missing and 80% of the steps were skipped
@joviejovellanos2410 Жыл бұрын
Dope vid 👍🏽
@tmkarau Жыл бұрын
Just happened to me 😔
@lochnessspeedwerkz6557 Жыл бұрын
You do not have to remove the door jam latch mechanism. It didnt make the job hard at all
@alannihall1733 Жыл бұрын
locking mechanism like the red and white thing? i’m having a hard time getting that off do you need to i’m order to take the handle off or can i leave it and just take that bolt off
@lochnessspeedwerkz6557 Жыл бұрын
@@alannihall1733 I mean the three phillips head bolts in the door jam. I didnt have to loosen or remove those to do the job.
@tunerforlife2274 Жыл бұрын
Bro u miss the part hot to take off the e brake clip man 😢
@TommyMccoyMedia Жыл бұрын
I did mention to take it off that way you can have some play. I hope this video still helped! Thanks for watching!
@dcarsondavis Жыл бұрын
I need to replace my wife's. I pull the handle and it doesn't unlatch. Is that the handle or the latch? Also, did you have to get the new one rekeyed?
@the3dsmurf Жыл бұрын
Idk if you still have the car but I got one and I have a couple questions. I need to take out my expansion valve can you help me
@Thxful Жыл бұрын
I just got mine and ngl it does not fit well at all. Did you guys have any issues at all?
@trentwalborn7675 Жыл бұрын
THANK YOU I HAVE BEEN TRYING TO FIND ANY INFO ON THIS CAR YOU JUST SAVED ME LIKE 300 IN REPAIRS
@TommyMccoyMedia Жыл бұрын
Thank you for watching! I hope this helped. I know some people were unhappy because I didn’t show several things but it’s things you’ll understand once you do it. I appreciate you!
@ivicavecni Жыл бұрын
Nope. You didn't showed us everything you did. One of the screws could not even get out, so I could not finish it by my own. 😔
@nhu-thuypham6153 Жыл бұрын
Do you have a new link for the brake pads and rotors? The eBay link doesn't exist.
@1YouTube_you Жыл бұрын
Rotrex is a great product. Idk why yours broke but it a fluke. You should have contacted Rotrex! It’s definitely junk now
@justinglover7244 Жыл бұрын
That’s cool you still have your dad helping Cherish it man
@yamkaw346 Жыл бұрын
I was wondering why the hole around the 5mm Allen was all drilled out on your car..... then I did this job myself and found out why... wtf Honda
@robyn8842 Жыл бұрын
What part should I order for *passenger's side* to do what is shown here?
@SINCITYxFoXx Жыл бұрын
Leaves out a lot. Seems super simple until you actually do it 🤨
@brassmonkeegaming8583 Жыл бұрын
Now, if I am not mistaken that damage is caused by hitting limiter way too often. Planetary gear systems do not like hitting limiter. Rotrexs are suprising delicate units. Those input shafts are useless though