kzfaq.info/get/bejne/h7KojZlol96wnoU.htmlsi=u_S4gxlTGiUOQBWf

who the hell works 10 ft in the air

realy must be first job

Miss those days 😢

Nope.

Was it you that had the 120 gallon skid you bought?

Nobody knows if hes clean and sober. We only know what he tell us dont forget hes a actor . ❤

Our well is still pumping the water that you found day in and day out. Thanks and happy Independence Day.

This is an old video 👎🏻👎🏻👎🏻👎🏻

Matt eres lo máximo

So they drilled the well June 29th. 100 feet deep and 150 gallons per minute.

good job I work in this field Is there an opportunity to work with you I am from Syria and I currently work in Libya in this field Can you help you to register with a company? Thank you have a nice day

This is the perfect example of MATT when he was doing that nose powder ;)

Matt looks jacked up on the nose powder here lol. U can tell by the time lapse with his missing teeth when he got them fixed and turned his life around.

A old timer once told me you use what You have,he has no Hyd.or air casing Hammer,no jars,just Guts, sweat and Drive!!! Get-R-Done!!!

WOW dude DRUGS are makin there case!

Did you say Rockford, as in Illinois?

Proof that racists aren't very smart

Drilling in Florida is different. Just throw your casing in the ground and you will hit water without witchcraft

2nd Version Round Clicker. The Original didn't have the name plate and that name plate is crazy rare. 1800 is a small price. There are only 3/4 of these in the world today.

Я бурил в Сибири в 2013 году

Shocking 😂

Hey a herd of 2 is better than none

That old iron looks so dangerous i love it. No guards rust everywhere one wrong move and off to the hospital you go.. thats what an aware person, knowing everything around will mess you up, not the illusion of safety cuz fresh paint and a couple guards.

Safety Karen police. Go tell your boss as at all jobs there’s always a man’s private head like you. Congratulations 🎉

Another great one Herb!

kzfaq.info/get/bejne/gbBledGKx5y6lZc.htmlsi=yIMWVuPkil7x-cBP

I would like to see a more in depth video on that tender, it's looking good! I have built some slip on fire skid units for ranchers down here in eastern Oregon but would love to get into some bigger projects like that.

This was from years ago. He has changed his life

Is this up your way or further north?

Been there. Done that. A few times 🤦‍♂️ Also, I’ve measured the coffee -to perfection, only to forget to fill the water reservoir. Maybe that balances the Universe 🤷‍♂️

Just watched, doing up the bolts, DON'T USE A LADDER.. Bolts go in the same direction, grease the faces, Grease the threads, YOU are safer standing on the rig.. Hitting the spanner with the hammer, foolish causing sharp areas, chips the steel, USE a flattened pipe as a slip on handle.. Cheers..

My last comment at this time is, YES chain that stem / bar into the Rig, but have a 2nd chain for the Bailer / sandpump.. Cheers and I hope this helps others..

Woman Drller, Hell YES , great to see, but again its mostly ONE PERSON AT THE RIG, when its working..

Bailer, I used a Sandpump, Tube with flapper valve at bottom, a valve on a shaft that slides up and dowm, to drag / suck gravel, sand , glay, sometimes TIMBER, from Trees into.. That was then priveted (sp) to allow it to empty.. My BAILER was used to test water yield and a DRUM with a discharge pipe out at the bottom, allows you to stay dry, and SAFE.. One Person at the Rig, off sider to help at times Yes, but not as much as in video.

Driving winch rope, personally I don't like the split drum idea.. It's so hard on the rope, just wind the rope on under load, [ tied to a truck, out in paddock ] And use full width of drum.. Again avoid slack ropes when drilling or driving.. Spring at top of mast is there for a REASON...

Rope damage, loose rope on that sandline, it can cross over, gets caught on winch pulling it tight..

Drilling Ahead is not always possible, here in CHCH, New Zealand, its gravel and sands, some clays. Ground won't hold open..

Also the GLAMPS / HAMMERS yes different names used by different Company's they don't have to COME OFF. They can sit on the drive head, when STEM / BAR Is down the hole.. Don't mix the nuts around, mark one bolt with X, and the nut to match.. A fine thread is best, stays tighter for Longer.. Grease the faces before setting up to the squares.. Leave a slight gap , inorder that they glamp on the squares only..

STOP the Horrible, stupid stuff. 27 years of well drilling, never used a ladder. Worked on my own, no broken bones, blacked a finger nail, couple of times.. As you are learning as you go its hard but risky.. I used a drive head , put on the casing before lifting up.. Lift casing, lean it into mast, bottom resting on casing.. Then manually stand it upright.. With level check for straight, using a bent welding rod, flattened both ends, USE that to set GAP, tack weld. Then prop casing straight and weld.. 3 runs, root run, bottom run 1/2 on casing 1/2 on root run. 3rd weld to cap at top..

Hello Matt

That's me 🤣😂🤣😂🤣....

They will be in Colville on Friday the 5th at the NAPA.

Matt is clean and sober

P r o m o s m

I better not--lol

I'd get in big trouble with one of them in my back window lol!

Best friends

They both need a glass of whiskey and a cigarette now lol