@user-jz6rg1bk5i if it was garbage how did mine last 2 years never broke a gear or burned out a esc.

Same story here I had the Frog then the Clodbuster. I got back into the hobby with monster trucks and truggies. Then I looked at the old Frog and was like damn I dont have a buggy and bought this. It is a beast on 6s check out my review video I was shooting rooster tails across a field lol. Even on 4s it has a ton of power. I am thrilled with it. If you ever want a buggy that can handle rougher terrain and is larger check out the Team Corraly Asuga its wild! I have some vids on it as well. Thank you for watching and the comment

​@@L2theWcarscoffeelife Tamiya Falcon was my first, then the Bullhead, which I still have and need to fix up. Bullhead is the same as the Clodbuster except with the semi body, so we have very similar origin stories... Haha

@CRKhead I still have mine I have the early Clodbuster with the Chevy bowtie in the grill and says Chevrolet on the tailgate. Wish I would have known back then they got in trouble and had to take it off I would have saved that body getting it running got me back in the hobby again wow how it changed I thought my frog.was fast lol

Thank you for watching and he great comment I have a couple more vids with the Xmaxx coming up I am definitely enjoying it

@kirilltvt9029 hello my friend

@shannonblack527 brace for what exactly? If there is a need he can do it

@@L2theWcarscoffeelife my bad… a brace for the back of the body so the bed of the truck doesn’t split. Maybe it could tie into the rest of the cage

it is a great truck thank you for the suupport

thank you very much

@@L2theWcarscoffeelife You are welcome, thank you for your channel. I watch most of your videos. I too am an RC-Addict 🤣

Awsome!! Lol

All we can do is hope lol I doubt they will either for some reason the refuse change I wish I could adapt the XRT system to it. There is a guy in England that 3d prints a body saver he sells them on Ebay. It seems to help its hard to say 100 percent because mine is already cracked but I dont think it has gotten any worse . I think its Hamilton designs.

I cant find the specs as to what gearing they use lol. You are right that is what I suspect is one of the problems is too much gear they wanted it to be fast.

lol you are a bit rough on them I should be better about maintenance I just want to drive them not rip it apart lol

I have flown this plane many times since this I have a video on the channel on how to adjust the trim its something that is not in the manual as long as you turn it on and its flat that is what sets the gyro not the launch. Yeah it seems hard to get sometimes you might be able to buy direct from them my wing connector broke the only place that had new wings was OMP China direct

That sucks I hate to hear that mine is still ripping on the factory stuff

I dont think it lacks power at all running it on the ground its a handful its all over lol. It could use a gyro. I guess people want it to wheelie or something I dont get the 8s stuff just like the Sledge so many saying its under powered I dont get where that comes from. This is another great ground pounder people want to make into a big air rc and as long as that chassis is there is not enough bracing for that its not designed to jump. I do not think the wheels or shocks would handle much of that its a ground racer thats what it is designed to do. Thank you for watching and the support.

Thank you very much this is a great rc its crazy durable especially with the driving we do the smaller jumps it soaks it up easily it is something else having something this large coming at you lol.

@mattmaclearn263 not sure someone said to switch arms from one side to the other but that seems weird to me

@@RC-Closer1313 thank you very much

@@RC-Closer1313 lol yup its the trademark of the Xmaxx

@StraitJacketRC its not going to cause a thermal shut down that fast even my review video didn't shut down its just damn hot out here heat indexnis over 110 its just rough on the electronics rc guy garage is not having thermal issues and like I said my review went well friction can add a little bit its not hurting this motor not enough for me to rip this apart like that.

@@L2theWcarscoffeelife the video where he was running it at the skatepark a few days ago it overheated, I’m not saying it’s the only cause. I’m saying it’s adding to it possibly. But yea I get it most won’t or can’t tear it down that far to remove the shims unfortunately. 🤷🏼‍♂️ winter is coming that will solve it 😂

@@StraitJacketRC I got a fix coming up lol wait until you see unfortunately they made it a real pia to get to the diffs on it I wish they would have a quick access to them

@@L2theWcarscoffeelife there are lots of screws but it’s a simple design, I was a lil intimidated at first but once I tore it down it made sense and went back together easy. Biggest bummer is the need for a .05mm to disassemble the driveline yokes. I got the MT, I’m debating grabbing the TR as well. Really digging these rigs! Redcat is moving in the right direction finally 😆

@@StraitJacketRC I am just lazy lol I really dont want to mess with it I am the worst at maintenance spoiler alert I got a new servo for the xmaxx its been sitting for like a month I didnt want to take it apart lol I got it in about to ge test it out. Yeah I am liking what I see from Redcat thats why I jumped on it especially for the price its a great deal. I am sure somewhere I have the right size bit id I dont already in the shop I have 2 tool boxes in the garage lol I used to enjoy wrenching on the real cars but back issues make it to painful

Hello my friend

@RC-Closer1313 lol yeah I think that was a record for a shut down lol I still had 65 percent battery left and I actually had just used it to run the 787 before so it wasnt fully charged

@RC-Closer1313 someone mentioned adding a little throttle trim so maybe that will help

This should not have any issues handling 4s over the long term. I know I just literally did multiple speeds runs with the MT version after having already spent 2 hours driving through the trails early this morning and it never got hotter than 93 degrees. It hit speeds ranging between 58 mph and 60 mph which astonished me. This is a very strong esc/motor combination. 4s is by no means going to cause it any harm. I believe the motor is actually 6s capable if I am not mistaken. You'd be more at risk overhearing a Traxxas Maxx or Kraton 4s than you would this. I am beyond impressed with this vechile. It drives very similar to the 6s Big Rock in fact, only better. Literally better in that it is just as stable but more nimble and faster when comparing both on the stock pinion. Before this, my favorite release had been the 6s BigRock which I do like better than the Kraton exb due partly to the amazing stability. Once you get a decent receiver in there, this is just as stable. It checks every box for me. Good protection from debris, excellent throttle control, which means unlike vechiles like the Maxx/Slash, it is geared properly out of the box. I used to think Spektrum 6s esc was smooth until sampling this. I am extremely tempted to upgrade at least one of my 6s Arrma's to a Hobbywing. It is also built as tough as the Maxx from what I can tell. The Maxx is another terrific vechile but at the moment this is my favorite. Only time will tell. The Maxx has been my toughest vechile to date. In the past 1.3 years only issue has been a pin coming out of the back tire. Hopefully this will be as tough but we'll see. I dont drive any of my Arrmas nearly as hard as the Maxx mainly because while they handle better, if they took the same hits the Maxx has taken they'd be in pieces right now. Also, the constant need to service the differentials on Arrma 6s vechiles is extremely annoying. If you dont, they drive like shit. I dont think this here Valkyrie will require as much attention but again we will see.

Also, the differential gears in the Valkyrie vechiles are massive. About twice as thick as what is in 1/8th and 1/7th scale 6s Arrma vechiles. They can handle 4s easily as well as 6s. No need to run this on 3s.

I will try that thanks

@@L2theWcarscoffeelife yezzir anytime..😎🤘🏽

I have even said it in my vids the truck is great out of the box and like you I might gear up a little bit and add a fan I already had all the parts before I had the rc lol I was really shocked how well it did. I will probably end up putting the factory motor in it but a better esc and save the parts I used for something else

Good morning

Also, ARA330838 show as the replacement shocks (non upgrade) for the Mojave Grom, which lists as coming with 800CST oil.

Your another one with the issue another subscriber told me that's the one thing he has not broken. I think a bad batch was made because it did pop out way to easily there is no way it should have gotten out around that spring. Sucksnit happened but so far the cvd has been holding up and that's on 3s brushless lol

@@L2theWcarscoffeelife Mine are all stock aside from the (now) upgraded CVDs and upgraded fans, and some minimal backyard bashing.

@jrmbtr good info thanks

I saw one channel had the same issue and his was stock and it happened again lol. Maybe there was a handful of bad ones that got out. Arrma is bad about having stuff in stock and you have so many people either just want the better parts or are going brushless and want to make sure it can handle it. I wish they would make sure they had parts but thats not how they do it the Promoto was damn near impossible to get anything for a while. Wow you killed 4 diffs thats amazing because yours is stock I cant believe they are that weak.

Powerhobby makes a diff, looks exactly like arrmas, they're about 40 bucks

@@birdistheword1327 Have you used one? Are they any good, do they have all metal gears?

@@GreatLakesRC to be honest I got a spare knockoff "v2" version on eBay for 16 bucks, all metal supposedly, I thought since it was so cheap might as well give it a shot first and see how it goes. I have the powerhobby on the side for just in case. The eBay version looks promising to me we shall see

@@GreatLakesRC yes they have all metal gears, I just now realized I didn't answer your question lol

Thanks but I have it now I was having problems like I expected because if having the reciever up on the center brace now that I have it back down in the tray out of the way its all good but thanks for the info

@echo-hotel we manage to use gps in aviation and your car gps will take you to your mailbox its not what your saying. I can barely move it and get a reading when it was first made public it was not to its full potential like we had in the military but thats not the case. Its entertainment it gives you an idea what you can run every channel has different speeds due to battery types alone its a guide we are not setting recorded records just have fun with it dont stress

Hello my friend

@kirilltvt9029 hello my friend

Thanks!