And you are not a mind reader either. Why don't you offer some help and then have a clue. I do agree, you're not a very bright guy
@joehiggs251825 күн бұрын
You have no real idea of what you are doing
@curtolocknkeyАй бұрын
Quit playing with your new toys and get them fairgrounds locks changed… LOL
@JenkinsLocksАй бұрын
lol, I'd love to and have everything pinned up and ready to go...coordinating is the main obstacle right now with the fair just a few weeks away.
@urgencylockoutАй бұрын
You cut the keys first before programing it? Is that your preference?
@JenkinsLocksАй бұрын
It's not a preference with keyed ignitions since you have to put the new key in and turn the ignition to the on position as part of the programming. If it's a fob, just depends on the day if I cut the emergency key first or not.
@Marshall_Lock_and_Key2 ай бұрын
Circle+/PK3 GM systems have always been my personal favorite for their onboard programming 👍
@simonrizk44512 ай бұрын
you are the man!
@pouncerminned8632 ай бұрын
i always do onboard if its available vs hooking up a scan tool to program the keys. Saves time and is just as effective
@pouncerminned8632 ай бұрын
What i do too to save time, is once you decode a key, i always check find bitting or look on insta code or lockcodes to make sure its a valid code cuz sometimes the key is worn and may get a bad decode
@pouncerminned8632 ай бұрын
Don, for some reason, the audio is only playing out of one side - to be specific- the right side on headphones
@JenkinsLocks2 ай бұрын
Strange, original video on my pc is playing both both channels. I noticed it's been taking longer after I upload for youtube to do its converting so I wonder if something is conflicting there.
@kasmarar77322 ай бұрын
I can't see
@hkssystemslocksafe24862 ай бұрын
UHS=always shifty! always "in stock" until you order!
@JenkinsLocks2 ай бұрын
They are hit or miss some times. I bought an adapter for my vvdi max that said "in stock" and took another month to arrive. So far, I haven't ran into it on anything I had a urgent need.
@odinslockllc2 ай бұрын
I found not syncing with my GoPro is fine and I just record and take the sd card out and plug it into my Mac mini for review otherwise I just run my GoPro batteries down quicker. Been using CapCut which I’m finding is better than iMovie. Finally figured out that the microphone on my GoPro doesn’t work in Quik capture mode. I have to have the GoPro already on them hit record. Must be a” bug” in my GoPro firmware
@JenkinsLocks2 ай бұрын
I found on gopro's support site that gopros can overheat and audio can be affected by the heat of the camera. Gopros can overheat quicker if stationary. I guess that means they are air cool while filming action. I'll keep using it until I find something different to use.
@curtolocknkey2 ай бұрын
Updating the Dolphin is a PIA under the best of circumstances…
@JenkinsLocks2 ай бұрын
I've been able to update it a few more times using this same method. Slower, but easier on the back than bringing it home.
@LCLockout2 ай бұрын
Great video! I think the repetitiveness of locksmith videos lets you pick up on small details of common tasks each of us does differently that can be improved on. Like somehow I never considered preloading my pinning mat for multiple lock rekeys like you do. Seems silly but you’ve cut my rekey time down by probably 1/3 with that trick. One helpful tip with the framon is make your own space and depth chart that is larger and easier to read for you and post it up in front of the framon so you just have to look up at it rather than side to side. I’ve got my most used keyways on a piece of paper set up easy for me to read and it helps so much so you’re not wearing those pages out and having to pull out the book every time.
@JenkinsLocks2 ай бұрын
I honestly don't remember when I started using those squares to prefill pins when just keying up a bunch of locks to the same key, but glad it helps. Definitely a good tip for the most used charts on the framon.
@ELEVOPR2 ай бұрын
Incase of Emergency- Put that spare "None Chipped" key somewhere under the truck inside of a closed water proof magnetic holder. Then clone a cheap $2 key Nissan style and clone it, then hide that key inside of your truck incase you lose your key one day. I am glad I ran into your video, I've already used a Cheap Key Fob and programmed it. I put that internal Key Fob into a new upgraded Flip key 3 button Key & Remote Combo. Now all i have left to do is to program the Super Chip put that inside the new Flip key Fob combo and I will have an all in one flip Key and Remote. Nice little upgrade for my older 2006 nissan frontier. Thanks for sharing.
@JenkinsLocks2 ай бұрын
I've was mainly testing out how to use this and the super chip. I've moved to an xhorse flip key. The video for that will be posted soon.
@ELEVOPR2 ай бұрын
@@JenkinsLocks That will be awesome. Would love to see that Xhorse flip key you chose. Can't wait to view it 😁
@odinslockllc2 ай бұрын
Idk why that depth adjust between cuts in the Framon 2 is a pia to me. I’m thinking when I get a 3D printer I’m gonna make a spacing block that’ll snap on for the depth portion so I don’t have to keep an eye on the graduations. That’s the only reason I prefer the 1200 over my Framon. It’s no big deal with a key here and there but if you’re doing a bunch I think it would be easier with a spacing gauge like the space block works. Of course I’d have to do several to fit the d/s’s unique to kw1 an sc1 etc. But I can’t believe someone hasn’t come up with something easier already. Great video. Thanks for sharing!
@JenkinsLocks2 ай бұрын
I've thought about 3D printing something like that, but I suck at cad programs. Anything that'd make reading unnecessary would be a win.
@cwb430682 ай бұрын
@@JenkinsLocks Im decent with fusion 360, If you want to sketch out what you want on paper I can 3d model it and send you files.
@JenkinsLocks2 ай бұрын
@cwb43068 i'll have to take you up on that when I get some spare time.
@daveaedion3 ай бұрын
Very cool and kind use of your prize winnings. I had a very good experience and learned a lot from my 4H club way back when. Thank you.
@Chirael3 ай бұрын
Wow that’s amazing of you to donate most of that gift certificate to the 4H org! I hope and have faith that it will come back to you in future business ❤ I to hold off on commenting with the hash tags for a while after winning, to give other folks more of a chance to win too. Thanks for sharing this. I have to go back and catch up on some of your videos I watched part of, then got interrupted and never finished or commented on 😂
@JenkinsLocks3 ай бұрын
Start, get interrupted, never finish is how i film the videos so it works out...lol
@LCLockout3 ай бұрын
Congratulations on the win. I’ve won shirts from them twice the second time I don’t even remember using the hashtag. Do you know why the 4H bought new big box store knobs on those doors instead of going through you? You definitely could have gotten them better deals on all that stuff through suppliers. And made sure they got the right ones.
@JenkinsLocks3 ай бұрын
Its mostly habit. They can go tonthe local hardware store and charge whatever they need to the 4-H account (or at least used to be able...thats been cracked down on).
@LCLockout3 ай бұрын
@@JenkinsLocks gotcha, well looking forward to the install videos. I definitely would like to see some videos from the when the fair is going on and stuff after you get all that done, even just a short or two it would be nice to see what that place looks like alive.
@curtolocknkey3 ай бұрын
Not sure how they do key control, but my guess is they will all think they need the top level master key.
@JenkinsLocks3 ай бұрын
So, the understanding of what a master key system was not there. Most members had 2 SC1 keys (even former members kept them), the "master" and the "other" key...both keys opened everything except the padlocks (AM3 keyway). Best I've been able to see taking multiple cores apart, every lock was keyed for only a single change key. I have not been able to find anyone that actually ever had the change key, but the current key system was put in 15-20 years ago. So basically, everyone was issued either the grand master or sub master key (or both) and everyone could get into anything with either key. Part of the issue on working to define and explain a new, functional system was that they wanted to restrict some people to some things during some part of the year. They also wanted multiple master key systems based on individuals and for those master keys systems to fall under a single grand master key...a grand master key that was given to everyone on the council, but was seasonal on access. Real the struggle is. So let's say the system had the grand master key, 4 sub master keys (A, B, C, and D), with each sub master having 2-6 change keys. Most of the year, they want Joe's single sub master key to work on A, B, and C, but during fair week, for his single sub master key to flip and only work at C and D. Now take this and repeat for 12-20 people with individual "unicorn" keys.
@curtolocknkey3 ай бұрын
@@JenkinsLocks So they need an electronic system that can set/change schedules (expensive) or a locksmith on call that can rekey locks on short notice. And definitely key control with restricted keys. Your mission, should you choose to accept it, is gonna be a pain in the (fill in the blank)…
@JenkinsLocks3 ай бұрын
@@curtolocknkey Nailed it.
@janecrafty29023 ай бұрын
Running so she's not Tonight's supper
@JenkinsLocks3 ай бұрын
Idk, she looked pretty feisty, so I wouldn't want to catch her.
@karlfitzner14303 ай бұрын
it likes SLOW children playing
@The-die-youve-created3 ай бұрын
Because -she's- he's a woke free-range.
@garyvaughn94753 ай бұрын
brought tears to eyes. this is just to funny. thank you for perfect video and timing. age old wars in this one. Westfir,Oregon.
@JustShayShay3 ай бұрын
She was going to sell her eggs.
@robg84333 ай бұрын
Freedom!
@lorimagby74873 ай бұрын
To get to the other side
@takeemoutdoors34893 ай бұрын
Took me 35 years to see this actually happen.....😅
@JenkinsLocks3 ай бұрын
Just about every house around here has free roaming chickens in the yard. Some of them are mean suckers and will chase you down.
@takeemoutdoors34893 ай бұрын
@@JenkinsLocks I mean I got a farm and everything but I haven't seen that happen ever LMAO they usually stay on the side of the road they know what happens here
@paulstubbings6453 ай бұрын
Because the slow kids live nearby
@tomcat48413 ай бұрын
He identifies as a slow child?
@johnclymer41523 ай бұрын
Showing the possum it can b done😂😂😂😂😂
@loreenkilinoemailaniokami53013 ай бұрын
Because there are more bugs across the road😅😂
@Pat_Speaks3 ай бұрын
😂😂😂😂😂😂😂😂
@javiermagdaleno83453 ай бұрын
To get to the other side. ✌️💙🏇🏇🏇
@montydiaz3063 ай бұрын
😂 classic
@jerrysanchez87853 ай бұрын
I think another chicken told him you’re too chicken cross the road and he said who is the chicken now 😂😂😂
@dsc1943 ай бұрын
Because the grass is greener on the other side of the road.
@davidtrivelli463 ай бұрын
To get on the other side
@curtolocknkey4 ай бұрын
Space and depth keys and a duplicator starting out. But I do enjoy my framon #2 now.
@JenkinsLocks4 ай бұрын
It's a world of difference!
@LCLockout4 ай бұрын
Thanks for the video. Luckily I had the framon going into this so never had to space and depth, but that tip with the shallowest cut to see your spacing is super helpful if I ever need to! When you say trouble decoding lishi do you mean residential as well? So the thing that used to screw me up which might be helpful is you don’t want to put too much pressure on the pins you’re decoding. You just want it to touch the pin while you’re decoding since you aren’t lifting the key up when it’s in the keyway. I just tested this with a handful of ilco kiks and my decodes matched all the keys. Worth testing anyways. Also if they’re master keyed like the situation you were talking about decoding with the lishi isn’t going to help a whole lot anyways so sounds like you were using the right process.
@JenkinsLocks4 ай бұрын
I used the space/depth keys early on when I was mainly just helping family and friends and hadn't decided to open shop yet, but it helped to bring in money so I could get a Framon 2. I do things via a process I named "the harbor freight way"...I'll do it/use something until it doesn't work/breaks and I need to invest money in a better product. I've got a plan in the works to get the 4-H grounds switched over the MX 13 system with a real master key system (there seems to be a grand master key and master key that work on all doors and locks and no building/door specific sub keys so not really sure what the logic was).
@LCLockout4 ай бұрын
@@JenkinsLocks yeah those mx13 videos were how I found your channel. Hopefully they can get the funding for that job, sounds like it would be a pretty good fit for their needs.
@JenkinsLocks4 ай бұрын
@@LCLockout I was one of the 5 $500 winners from CLK in March and I'm goin to use that with some of my stock and donate the system to them.
@LCLockout4 ай бұрын
@@JenkinsLocks that’s awesome! well once it’s all said and done that’s going to be a nice setup. Looking forward to the videos if your GoPro behaves.
@tidewaters89754 ай бұрын
Because it can.
@LCLockout4 ай бұрын
Hey, new subscriber and fellow disabled Vet new in the trade starting my own business. I started in August of last year. Noticing a lot of similarities, I also run a Framon 2. Anyways loving the content so far just getting caught up on all your stuff. Honestly I’m pretty sure a lot of us in this community would be happy to watch you installing a door handle 3 times. You’d be surprised how many hours of watching Jason at SE Lock and key rekey kwiksets I’ve watched. The locksmith KZfaq viewer community have an uncommon amount of interest in tedious activities.Just post what you like. oh and I’ve Definitely seen some shaved down pins over here in western Washington too. I think it’s just a lowest bidder move you see everywhere.
@JenkinsLocks4 ай бұрын
Welcome, Brother and thank you for your service. I try to film when I remember the camera and not running from one thing to the next. I figure if someone can learn from my mistakes, it's worth it.
@wyattjenkinsakathebeardedd53994 ай бұрын
This dude on a dad level has to be legendary, nay i say mythological. Wish i had a dad like this guy.......ohhhhh wait..... hey dad love ya keep up all the awesome work on the videos and the business. I know powering thru to keep producing content can be hard love ya man.
@JenkinsLocks4 ай бұрын
Thanks, kiddo... videos take longer than the job most times.
@wyattjenkinsakathebeardedd53994 ай бұрын
@@JenkinsLocks ohhhh yea i can only imagine, i also happen to be writing this on that laptop you got working for me like a boss lol
@JenkinsLocks4 ай бұрын
@@wyattjenkinsakathebeardedd5399 Any time, love ya, kiddo.
@wyattjenkinsakathebeardedd53994 ай бұрын
@JenkinsLocks Love you too Dad I really do.
@curtolocknkey4 ай бұрын
Man, your Dolphin cuts a whole lot faster than mine. 😂 Thanks for sharing.
@JenkinsLocks4 ай бұрын
It was a pricey upgrade 😄
@Bhindervlogs-bx1lt4 ай бұрын
Can you help me please i am unable do mileage alter as it shows unable to connect eeprom adopter
@JenkinsLocks4 ай бұрын
I haven't had this device for a few years, but if you're getting an eeprom message, you'll prob need either an eeprom cradle or clip. I'm not sure this model works with one.
@geraldskinner634 ай бұрын
Fuses need to be checked. You added key..your job is done Brutha
@JenkinsLocks4 ай бұрын
I didnt show the back seat of the car...there was a fuse block among other parts. I tested adding the key, then wiped out all keys, and programmed the 2 new ones again with screen shots every step after. This job was a couple months ago and no call backs. Case closed.
@LS-ln1zu4 ай бұрын
Can’t use it to pro game my remote
@JenkinsLocks4 ай бұрын
Im still leaning to use it, but from my understanding, if you want to program something besides xhorse chips, you also need the obd mini tool.
@Chirael5 ай бұрын
Great video, thanks for making and sharing this Don. I’m going through all the Klom/Banggood tubular cutter videos trying to see if anyone discussed calibrating or adjusting it, particularly what each set screw adjusts. I’ll order my own but ordering from Alibaba is going to take 1-2 months to come in 😂
@JenkinsLocks4 ай бұрын
When I originally got this sharpied out KLOM set, I did have to adjust the cutting depth, which I should have done a video on. If I remember correctly, I took a key blank and cut a #2 in it, then measured with the included depth gauge, loosed the allen nut, made an adjustment, then cut a new #2 to see if the adjust made the cut deeper or shallower.