Making Car Key From Wrench!
4:19
7 ай бұрын
DIY Wire Harness Wrapping Machine
8:03
Пікірлер
@akritisingh7350
@akritisingh7350 18 сағат бұрын
Dc.moter.remot,control,takter.banker.dkho
@mariusg8824
@mariusg8824 21 сағат бұрын
Ah, warm wine! How delicious!
@mightyluv
@mightyluv 22 сағат бұрын
Beautiful work.
@SenselessUsername
@SenselessUsername 23 сағат бұрын
Lead is the reason recycling of glass bottles and pots is separated from window and drinking glass... That's not food-storage-safe glass, that's lead-containing glass which leaches lead into your drink [might give it an extra, sweetish flavour =) ]. It's not a problem short-term --- crystal drinking glasses contain lead, it's a little it doesn't matter over minutes/hours --- so by all means use it for a cool bar setup one evening... but it IS a problem if it stays in there for weeks/months, as you might with a good whisky or fancy gin.
@anne-vl7qf
@anne-vl7qf Күн бұрын
Some people are so clever and talented ❤
@Bidenshowersyndicate
@Bidenshowersyndicate Күн бұрын
Power tool battery pack should have cells with a minimum of 20 amp discharge rate
@bernardonokohwemu1428
@bernardonokohwemu1428 Күн бұрын
...and use strong quality face shield.
@DRIFTERYZ250F
@DRIFTERYZ250F Күн бұрын
Amazing
@hittrewweuy7595
@hittrewweuy7595 Күн бұрын
But can you still store liquids in it ?
@bobivasiliu
@bobivasiliu Күн бұрын
Super.
@drsquirrel00
@drsquirrel00 Күн бұрын
You can get the DIY kit cases with the larger balancing board too.
@TheNyhm1
@TheNyhm1 Күн бұрын
Good if you only run 1 machine at a time
@hasimarslan
@hasimarslan Күн бұрын
I wish i have seen your video earlier purchased many adapters
@SouthMiamiMartialArt
@SouthMiamiMartialArt Күн бұрын
I have built this, and it works great!
@mymai5859
@mymai5859 2 күн бұрын
Brilliant creativity
@SteveSmith-kf9on
@SteveSmith-kf9on 2 күн бұрын
Great video mate. Quick question, some of my old makita batteries need changing a lot quicker, any fix for that one ? Many thanks
@patsymoore4472
@patsymoore4472 2 күн бұрын
Awesome
@anton-ke4qz
@anton-ke4qz 2 күн бұрын
What a masochism)
@OmegaMikePL
@OmegaMikePL 2 күн бұрын
Legit first DIY video on the internet I find useful! Well done.
@tonyrattan8093
@tonyrattan8093 2 күн бұрын
Works great. I did add a rail at the top end of the table though.
@rickwilliams967
@rickwilliams967 2 күн бұрын
The tool might be simple, but the actual cutting isn't.
@Bdbrad71
@Bdbrad71 2 күн бұрын
Do you have plans for these?
@SouthMiamiMartialArt
@SouthMiamiMartialArt Күн бұрын
You can just eyeball the concept and build to your own specs. He's using 2x3s. I built mine for 4x4 legs. Just be sure whatever legs you use are square and straight. Otherwise the wheel "lifts" won't line up.
@hotdog9987
@hotdog9987 2 күн бұрын
Good man 💯👍
@puspasukla8209
@puspasukla8209 2 күн бұрын
Nah bro is adding micro usb💀💀
@wolverene84
@wolverene84 2 күн бұрын
That was absolutely awesome. Great job mate. Well done!!!
@charlesmg
@charlesmg 2 күн бұрын
Have you considered selling those batteries online? It would be fantastic to have them available in our country, especially since they appear to be of high quality and durability. I believe many people will find them useful and convenient to purchase from an online platform.
@JMVD48
@JMVD48 2 күн бұрын
Thank you for this demonstration, can be useful in future. 👍
@funkytransport
@funkytransport 3 күн бұрын
What does it do?
@tiresias4726
@tiresias4726 3 күн бұрын
DIY: Cut Square Glass Bottle In 3 Simple Steps
@MidweekPerfect
@MidweekPerfect 3 күн бұрын
😮 👍😊
@KillKenny09
@KillKenny09 3 күн бұрын
ok, but why?
@drsquirrel00
@drsquirrel00 3 күн бұрын
What spot welding kit do you use?
@ducomaritiem7160
@ducomaritiem7160 3 күн бұрын
Well, I actually like it very much❤
@-_Robert_-
@-_Robert_- 3 күн бұрын
Why not place inside whole 5S BMS which takies USB C and charge battery directly?
@juanc5149
@juanc5149 3 күн бұрын
Thanks! I will use this candle wax technique for my friend’s 2000 hp drag car!
@fishingisliving.
@fishingisliving. 3 күн бұрын
ANY ONE HAVE PROBLEMS WITH BATTERY ? MINE CHARGES TO WHAT IT LOOKS LIKE 42.2 % ON DASH SCREEN BUT BATTEY DRAINS IN ONLY 15 MINUTS OF USE VERLY 5 BLOCKS ON THE STREET BEFOR DING OUT ANY SOLUTIONS? BATTEY IS BRAN NEW :/ ANY SOLUTIONS ? ITS A 36V 30AH I HAVE A 36-40 Brushless CONTROLLER
@KodakYarr
@KodakYarr 3 күн бұрын
Don't show this to Adam Savage, lol
@Rundik
@Rundik 3 күн бұрын
A better alternative would be to use a cable sleave
@jeandanieldecazene9546
@jeandanieldecazene9546 4 күн бұрын
I'm sincerely sorry, but why putting so much efforts for such a poor result ? I don't get it sorry
@MrRoflfox
@MrRoflfox 4 күн бұрын
Honestly it looks terrible. Great job though, I understand it took effort to make, but the way it lights up is just really underwhelming. It's not a propper light source, it doesn't really look all that aesthetic and frankly it bothers me that you left the seams at the top.
@AuStistic_Lemurr
@AuStistic_Lemurr 4 күн бұрын
I'll take out a loan to buy one.
@normandothegreat
@normandothegreat 4 күн бұрын
😳💛👍
@darrylday30
@darrylday30 4 күн бұрын
Well done.
@joshkozi6355
@joshkozi6355 4 күн бұрын
This seems really dangerous and the finished product is kinda useless
@protection4541
@protection4541 4 күн бұрын
Hello, what is the method of testing the power of a 350 watt rechargeable motor?
@lindaburt6518
@lindaburt6518 4 күн бұрын
Great idea, great esthetics!
@danjason2167
@danjason2167 4 күн бұрын
Yo, I watched this video a long time ago. Like the best part of 8-9 years, i reckon.
@jaxn66
@jaxn66 4 күн бұрын
Ingenious brother, Thanks!
@dasurge5118
@dasurge5118 4 күн бұрын
Watch out with the ce glue fumes my friend
@annemariemyburgh7252
@annemariemyburgh7252 4 күн бұрын
Ignore all the negative comments, IT'S BEAUTIFUL