Пікірлер
@wilmamo1 5 күн бұрын
When you leveled your mobile home, did it do anything to your doors and windows? We want to add on, but in the cold and warm climate here in Ohio, and because it wasn't below frost line, we have a mobile home that rises and falls with the weather, and our doors and windows flexuate.
@robertmontgomery3892 10 күн бұрын
Anyone who quotes outdoor temps in Celsius is obviously anti-American!
@travislaster3239 13 күн бұрын
Very nice work wish more people took pride in their work it shows
@coreymadden3650 21 күн бұрын
Thank you sir!
@courtneyclark995 22 күн бұрын
Looks amazing it's all coming together.
@courtneyclark995 22 күн бұрын
Nice job man looks great.
@Losttouchjs 23 күн бұрын
You did such a nice job and professional work. Please sale this mobile home to someone that will take care of it.
@JanColdwater 24 күн бұрын
Very nice job. Recently I learned that when you lay the boards on top, look at the end of the decking boards and make sure the grain of the wood turns downward like this-> n not like a -> u. As they weather and age, they won’t bow upward. Cheers!
@noconspiracytheoriesplease.745 24 күн бұрын
I really appreciate your attention to detail, thoughtful explanations, and tidy job site. Maybe I missed it, but do you have any thoughts on effective ways to plan for an access door i.e. to store and retrieve belongings or building materials? Thank you.
@MrRerod 26 күн бұрын
Do you have a video of jacking the trusses off the wall to replace the bottom plate? My trusses are scissor, and Im not sure how to place the temporary header to safely jack them up. Can I jack three studs up from the outside by bolting 2x8's to them without the jacks kicking out?
@Ben-hr9gq 26 күн бұрын
How big is the decks
@tmb9126 29 күн бұрын
p.s. I've liked and subscribed. Can you please tell me if it's easy enough to pull aside the skirting and to look under a mobile home and to pretty easily see if there is wood rot or termite damage? Thanks a bunch!
@tmb9126 29 күн бұрын
Thank you for showing this! Much appreciated. My husband and I will be moving into a mobile home after living in block homes our whole lives and I was wondering about mobile home repairs. #1 on the list: take care of leaks immediately! lol Blessings!
@robertgussler4393 Ай бұрын
finely a video showing how its done thank you i need this done to my mobile home asap my front door is sagging cant open it more then almost half way open
@jimmyreel3293 Ай бұрын
Did you raise your ceiling height in the old portion of the trailer?
@DiscoveringLiz Ай бұрын
What a well instructed video!! Thank you so much
@My-Nickel Ай бұрын
Thank you
@elbaocasio4798 Ай бұрын
I love in Florida can you recommend someone that can work on my mobile home. Thank you
@scottbonham70 Ай бұрын
I'm looking at buying a trailer in need of a lot of work. I was wondering if you had a floor plan for this trailer that you could share?
@kv8245 Ай бұрын
Found your site when researching how to refinish VOG walls. I’m wondering about the texture that is on the panels and if you were able to get a smooth finish after mudding between panels. Did you still have some texture or is it smooth with primer and paint. Did you sand it smooth? Thanks.
@charlottek.b.harman-pv5lt Ай бұрын
Any reason you shouldnt do a deck like this with posts directly into 12 x 12 pavers?
@kellykraft7840 2 ай бұрын
Wow you did a wonderful job!
@KhoaTran-zv1ij 2 ай бұрын
Hello 👋 Where can I buy this kind of skirting panel?
@heatherhanneman5742 2 ай бұрын
What is the red tape?
@douglas7555 2 ай бұрын
I have watched you video and I’am impressed, I have a two questions, 1) did you under pin the skirting ? 2) how do you remove the skirting for maintenance?
@AshHathaway 2 ай бұрын
thank you, im putting a quote together for a mobile home park! This visually helped alot.
@Grendelmonster8u 2 ай бұрын
My brother in law wants to use a plumber to replace the 1992 piping in the mobile. As far as I know, they’re going to go underneath which is about 2 1/2-3’ high. The outdoor spigot is on the front patio. People don’t go behind their trailers as most of it is the neighbor’s. He says he’ll have to move the spigot to the backside…It’ll make things easier, they said, though it’s not clear to me why. The trailer is only 15 feet wide and 500 square feet. This would be inconvenient as I would have to run two hoses around to the patio. I don’t get it. Why would replacing the pipes not follow what’s already there? They want to put in an electric water heater to replace the propane one because they think it’s dangerous in the bedroom in its own little closet. They would also mess with the shower faucet-take out the old 2-knob one and leave a hole or have two faucets which would look weird. Do you have any idea as to why they would move the spigot? I don’t want it moved. You can easily take off the skirt panels and go underneath anywhere. A lot of webs under there. But panels can be taken out on both sides to let in light and air…and scare all the mice away. 🫣
@juangarza7392 2 ай бұрын
I would like to know I would like a mobile home makeover & would like this man to do it . Anybody know who this guy is , so I can get his information ?
@1hjehje 2 ай бұрын
A great looking job and excellent attention to detail. I have been following a KZfaq channel where a young couple is restoring an older mobile home. They are located in Florda and I was surprised to see that there was no sheathing on the mobile home right from the factory. The walls were constructed of 2x3 lumber (not even 2x4 s) and the metal siding was attached directly to the studs. There also was no vapour barrier between the studs and siding either. The roof trusses were mainly made out of 2x2 lumber and there was no sheathing on the roof, just galvanized metal. They had a lot of rotted wood to replace, especially around the doors, windows, and sills. This trailer will be really nice when you are finished with it. I just discovered this channel so I'm looking forward to seeing the rest of your videos on this project.
@bennybongosbigolebonanza894 2 ай бұрын
We have this problem. They didn’t hang the siding below it and our cinder block foundation skirting so water ran in. Nice that it’s not load bearing and TOO much of a structural issue.
@Catfish2255 2 ай бұрын
Can you take 4 guys with 4 jacks at 1/4 the length each apart and jack a side up at the same time?
@jimmyreel3293 2 ай бұрын
Best I’ve seen in trailer addition videos. I’ve watched this several times. Thank you sir for your time and knowledge!
@pacmanplayer6625 2 ай бұрын
Is the Ledger board screwed to the house ?
@BCRenovationMagazine 2 ай бұрын
Hi pacmanplayer. It is lag bolted to the main structure, but it is not load bearing on the main structure. It is lagged only to prevent the deck from pulling away from the main structure. The deck itself is supported by posts and concrete footer blocks. Code in my area requires that decks be self supporting, stand alone structures.
@GardenisLife 2 ай бұрын
@@BCRenovationMagazine you double checked your local code right? im absolutely positive you know more about this than I do, but im doing a deck right now too, and noticed in my local area, if the deck is connected to the house, and over 250 sqft, a building permit is required, while if its not connected to the home, it can go as big as 1000sq ft before needing a building permit. Either way you got a beautiful deck going on man! im building a 24x12 but mine is only about 3 ft off the ground.
@BCRenovationMagazine 2 ай бұрын
@@GardenisLife Hi, Gardenislife. Absolutely, always check the requirements in your jurisdiction. Requirements vary widely and what is acceptable in one area may not be in another a short distance away. In our area, there are four different jurisdictions and different requirements all within about an hours drive of each other. Generally speaking, around here a permit needs to be pulled if the deck is more than 24" off of the ground or if it has any kind of structure built over it. Repairs and maintenance are exempt. Most of our work is done on first nations lands, which is a unique jurisdiction.
@AlbertoMtz560 2 ай бұрын
How mucho.monei you spend in that proyect?
@adianis2000 3 ай бұрын
I love this job , that people did . I would like to do might as they did .❤❤❤very professional
@nicktaylor4807 3 ай бұрын
Great job on landscaping
@phyllisalderson6247 3 ай бұрын
Very nice !!!!
@daniellavin5874 3 ай бұрын
Just a question Have you ever used concrete retaining wall block as skirting?
@BCRenovationMagazine 3 ай бұрын
Hi, Daniella. I have not used concrete blocks myself, but have seen others do it and it looks nice.
@cathywilliams8775 3 ай бұрын
Your craftsmanship is over the top.!!!!. wish. I could. Hire you here in. Tennessee. Always love 👀 your video's. Great Great job as always. Ive been watching for a few years.I Have learned alot 😊 just wish i could find and hire someone. Here in Tennessee that. Had your. Patience and work skill looks. Great cant wait to see your next project 😊
@BCRenovationMagazine 3 ай бұрын
Cathy, thank you. 🙂
@nicksinclair2407 29 күн бұрын
What part of TN?
@lindapottier1280 3 ай бұрын
You have replaced just about everything on this one & so much info & neat diy tricks of the trade. You said it's an 84 model....do you know the factory name? Such a sensible floor plan.
@BCRenovationMagazine 3 ай бұрын
Hi, Linda. Yes, this has been a big project. It was a home that was destined to be hauled out of there and disposed of. But, I picked it up and rebuilt it. All of the labels and such that identify the make and model have been removed by previous owners and renovators before I got it, but the registration documents say it is a "Pacifica". I don't know where this one was manufactured but the home I did before was about 10 years newer and had a very similar floor plan. It was made by SIR Industries in Estevan Saskatchewan, Canada. This home has been a LOT of work and has been time consuming with all of the other things we have going on. It is a testament, though, what can be done by people looking to get into a nice home, affordably, if they are willing to put in some time and elbow grease. I bought this home for $2,500. A lot of work later and about $100,000 put into it and it is now worth about $300,000. I may do a video that specifically deals with the ins and outs of the logistics of a project like this. I see so many people struggling to get into a nice home. This is a way to do it.
@SuperBooboo02 3 ай бұрын
@@BCRenovationMagazine Pacifica is a model made by Silvercrest homes, or at least it is currently
@Whistlewalk 3 ай бұрын
That was a lot of work and it's looking really nice! Great job.
@BCRenovationMagazine 3 ай бұрын
Whistlewalk, thank you. 🙂 Yes, it has been a lot of work.
@rhondawillhite9418 3 ай бұрын
Amazing transformation of this mobile home!!! Hard to believe this is the same mobile home. You do great work. Think you also have good insights on colors,etc.
@BCRenovationMagazine 3 ай бұрын
Rhonda, thank you! Appreciate you watching and your kind comments. 🙂
@rhondawillhite9418 3 ай бұрын
@@BCRenovationMagazine you're welcome
@moviemakerwannabe 3 ай бұрын
You don't just do beautiful work you also have very good taste in the color schemes you choose
@BCRenovationMagazine 3 ай бұрын
Moviemaker, thanks! 🙂
@almachapman5409 3 ай бұрын
Awesome
@Clover12346 3 ай бұрын
Wish I could buy it!
@Clover12346 3 ай бұрын
Looks awesome.
@BCRenovationMagazine 3 ай бұрын
Clover, thank you. 🙂
@Clover12346 3 ай бұрын
Yea another video!
@fcasey8476 3 ай бұрын
Beautiful!
@BCRenovationMagazine 3 ай бұрын
fcasey, thanks! 🙂
@tammydavis458 3 ай бұрын
Looks great! Always enjoy your videos
@sowingbird8845 3 ай бұрын
It is looking FANTASTIC! You have done another great job! Many blessings!❤❤❤