I changed this deck belt a month ago. Now the deck height is screwed up and it’s digging into my lawn at 2.5” setting. Where did I screw up? Any suggestions?
@remowb18 күн бұрын
The hardest part of removing the mower deck on my JDx350 is getting the J-clips out. It looks so easy on brand new ones, but I have lost a lot of skin on my hands trying the get these pins all the way out.
@glibberglobber935825 күн бұрын
Straight to the point. Thanks!
@madgav935Ай бұрын
Thanks
@jeffsipos1574Ай бұрын
Great vid!!!
@narcoosseeflАй бұрын
I hate this belly mower. I've owned my 1025R and mower deck since 2015, and it's a battle - EVERY SINGLE TIME - to install it. Worst $ I've ever spent on that accessory.
@davidryno75642 ай бұрын
my issue is where should the Lever on right side be positioned/used? The one used to lower/raise deck.
@regbowes11272 ай бұрын
Thank you!
@AChaoticThought2 ай бұрын
Thanks for covering half the screen with your yellow filter and text lmao
@lindencamelback23052 ай бұрын
It is a tragedy what has happened to Gravely under Ariens.
@_dakota_2983 ай бұрын
Do you have a video on how to put a bagger on a John Deere 350
@PATCsawyer3 ай бұрын
Quick and easy example, but whose ever idea it was to keep running those yellow shade swipes in front of the parts I need to see as their being taken on/off, well that guy should be permanently assigned to cleaning manure spreaders...........
@sebass1063 ай бұрын
I have a blade freely spinning must've hit something any suggestions on what it is ? Is there a shear pin or ???
@clovehitch18543 ай бұрын
This is just short of worthless. Lining up the spring loaded pins into the draft arm holes on my X500 is very difficult due to poor design and a way too tight tolerance. Some farms have gravel driveways that are not perfectly level but Deere didn't put that in the design equation. My neighbor agrees and has the dealer come and pick up their mower twice a year to avoid dealing with the deck. He'd rather pay the couple hundred bucks. Getting the pedal up and locked with the lift lever is not so easy either.
@PoisonShot203 ай бұрын
Could you have done this without the annoying music and faster? Been sarcastic about the speed, but not about the music.
@ferrarifobs3 ай бұрын
Whoever at John Deere designed those pins that lock the back of the deck should be fired. What a dumb and hard to use design.
@paulchace23913 ай бұрын
What about spring adjustment??
@jwtorrente4 ай бұрын
Thank you!
@jwtorrente4 ай бұрын
Thank you!
@idrum4ever24 ай бұрын
No useful information here. My mower deck was a pain to slide under tractor. Not as shown here. The draft bar instructions were horrible. He shows it sliding right on without explaining orientation or tension. Drive belt demo is a joke. No way he just pops that on. The tension arm tension is tremendous. And now I am stuck and needing help because I can't get belt on. Someone was obviously holding the tension arm for him. I had an LT190 and they had a tension release handle and it was straightforward. JD seems to be engineering their products to be less user friendly. If it were as easy as this video then you wouldn't need a video.
@ccatdonkey4 ай бұрын
Awful
@reviewmystuff17854 ай бұрын
Awesome thank you
@lisastewart23795 ай бұрын
That didn’t help at all! What about the pro and the front attachment
@robertforcars73886 ай бұрын
wow 😯 makes my supposed drive over kubota deck look retarded…
@GaryDavis-ll4uc6 ай бұрын
Very good video. Thanks
@ronsteitz45356 ай бұрын
How about a video showing how to adjust shoe height and lift adjustments to be made for blower and blade clearances on irregular surfaces like concrete or gravel?🤔
@Stromdiddy186 ай бұрын
does this snowblower fit on the JD 2305? i can't find anything saying yes or no absolutely
@mowgli830706 ай бұрын
This video sucks. Why discolor it??*
@cBetweenTheLines7 ай бұрын
how much does a set up like this cost after everything?
@johndenver85747 ай бұрын
Little soon to be advertising lawnmowers.
@MrPooPooJohn7 ай бұрын
Whoever is responsible for the after effects of this video deserves a hard kick in the nuts. WHY ARE YOU COVERING HALF OF EVERY SCREEN WITH A YELLOW GRAPHIC? YOU’RE NOT FANCY! IT’S MORONIC! IT’S A HOW TO VIDEO! YOU’RE BLOCKING HALF OF THE HOW TO’ING! ffs 🤦
@rhettabney28387 ай бұрын
Rhett
@rhettabney28387 ай бұрын
Rhett
@user-lz2gu1zm4h7 ай бұрын
Great instructional video, this is way easier than I thought it was going to be
@jamisoncurtis23878 ай бұрын
I got the older design noticed the latches are a little different on this newer one. That the only difference between the older and newer decks?
@sc292298 ай бұрын
Does the bucket and lift need to be off in order to remove the mowing deck?
@williambartholomew56804 ай бұрын
Nope, just have the bucket raised high enough to clear the deck in front of your tractor
@wisconsinbush29408 ай бұрын
Never liked the hydraulic couplers that John Deere uses. Dirt, grass and other debris gets into those couplers especially the females. Ever since I switched to Flat face couplers, I don't have that issue. Also wish they would incorporate the hydraulic quick connect valve bank that has a handle for quick connections. So much room for improvments.
@sandyh34499 ай бұрын
not enough detail
@wesmccallum57289 ай бұрын
Thx.. quick refresher is all i 3:05 needed.. this will be 3rd season. Fantastic unit all the way around.
@danielcarrier24539 ай бұрын
Great video, oh except you forgot the PTO part…
@karlscribner74369 ай бұрын
Excellent, “easy” to follow.
@blackbiker19619 ай бұрын
These Z-tracks are Chinese junk I made the mistake of buying my 1st Riding zero-turn mower and I bought one its stayed in the shop more than it did on my lawn so I turned it into a flower pot stand
@teofilstevenson9 ай бұрын
The tension on my linkage pins is waaaay stronger than this, they are very difficult to pull on and pull evenly
@mkat42719 ай бұрын
This woman stalks and harasses people on facebook.
@mickbrown9429 ай бұрын
Best video out there regarding the install. Put mine back on today while it was 60 outside at the end of October and only pinched my thumb twice. Ready for the snow..
@TheFiscallySound11 ай бұрын
You didnt align/level the deck.
@heathercarlson610011 ай бұрын
Do you provide parts and service for this machine?
@skinnyriot711 ай бұрын
You skipped the whole drive belt step.
@levikarren81244 ай бұрын
He literally did it
@shannonm82022 ай бұрын
You mean the part where it says 'remove belt from drive pulley'?
@brettsurrett459611 ай бұрын
Didn't show me shit with all that writing on the screen