Hi, on the v4 if I run sh and soap open I’m assuming it would draw the same percentage of soap and sh? Just curious if my draw percentage of sh is now halved with soap valve open and now the sh strength becomes too weak. For example if just sh valve was open I was drawing at 1% by opening the soap does the sh draw drop to 0.5%? Hope that makes sense

Is that a SH product?

Effective, When using 12.5 SH with the XJet what % can it put out? Thanks

Impressive distance

How does the duel 12 volt work? Do the join together to make more output or is in case one brakes , he has another or is it to help transfer chem throughout the van? I’ll be honest. I haven’t seen a van build that’s ever caught my eye but this one has. One last question. Randomly someone in my area is selling that exact softwashing skid. It’s basically brand new. Very low hours. He asking 4k for it. Do you think that’s a decent deal? Thanks again

Turned out really nice. You said “ he’ll be able to take on some big commercial jobs with this”. Will he really? Is an honest question. I ask because I’ve been thinking about a setup like this but have second guessed myself questioning if I would be able to handle commercial work if it came my way. Really nice setup. What’s something like this cost roughly ? Not including the van. What are your thoughts about vans? I’ve beeen thingking flatbed or pickup…thanks again 👍👍

Great video…. I assume doing this kind of work is more lucrative than softwashing homes? Really well done .. thanks

Good explanation.. thanks

Great explanation. Thank you. Can some downstream injector’s pull more than others to produce a hotter mix?

good info.. got all i need..

can you share a link for that chemical you are using please.

Thank you for the crystal clear explanation

Please show how the hose and other parts are coupled 1:36 1:38

hi do the f9 barc leave a white chalk stain on blacktop street after use?

Yes, great video.. Looks fun and inspiring!

Bit of both⚓️ Great job 🫡 more content bro 🙏🇨🇦

Great video! So I just bought an Echo 4200psi 4GPM with a GX390 and an AR Triplex pump. There are no bypass hoses, but at the base the black unloader pressure knob, there is a brass plug. Is this where I should plumb into? Wish I could send a pic Thanks!

Do you need this for direct drive pumps too?

Thank you brother for posting this. This helped me out a ton.

What about on the opposite side of your bypass line it the black nipple do you have to plug that?

Super helpful video - thank you!!! Your detailed explanation was just what I needed. 👍🏼

I like to use the zep tnt truck wash high pressure soap

The only way this wouldn't work if you use high pressure soap. It will just go on the ground or in your water tank

If a pressure washer do have a bypass hose is it Internally bypassing then?

helpful. do you have kits for the bypass

how do i bypass a simpson 4000 psi model?? thanks

what if you surface cleaner connects with a 1/4 can you still get the 3/8 ball valve?

The only time the pump is in need if the trigger being pressed for worry of burning up is if there is any leak in the system. If the machine surges up and down that means there is a leak or your unloader is broken. That's when you worry about cavitation

If your not pulling the trigger the plungers in the pump arent engaging, there's a clutch system in the pump that allows the belt or crank driven to soon freely.

The pump might be rated for 10gpm but that thing ain't pushing a whole 10 gallons thru those tiny jets in one minute, no fkn way

How do i use IT for karcher EASY!Force Advanced gun ?

Awesome and informative video. 👍🏼 what kind of quick connect connectors are you using for the 5 gal buckets to connect to your hose? I’m new to PW

nice build! how much would a setup like this go for??

You're a G thanks!

THIS ROOF NOT CLEAN AT ALL I CAN SEE MOSS AFTER CLEANING IT BEHIND THE GUY MORE MOSS

Nice tip.

I used F9 Barc on a big rock out front of a customers house, they have really heavy iron in there water and they were watering fresh planted grass. The rock was orange in the matter of a month and I used about 1:3 - 1:4 mix in a spray bottle and took all the rust stain out of the rock. 1200 psi 4gpm to rinse off.

You have no idea how much relief you have given me with this video. Thank you very much

Do all pressure washer have the 1/4 outlet/inlet size ?

Where can i find this

Nice I have some F9 BARC but haven't used it yet. Good to know. Also what alkaline neutralizer did you use?

Nice work!

What a relief to finally find a video that shows a practical and straightforward way to actually do this. And as a bonus this is the exact unit that I have so that will make it even that much more easier thank you so much.

Great Video!

Very interesting. Thank you for sharing your knowledge. I wanted to ask why my pressure washer doesn't turn off when I release the trigger? Is it a mi-t-m model cm1400 omeh?

Stoked for this year! Nice video.

What's your number again bro.? Dallas Texas here

Great vid, just what I was looking for, thank you....

Great video , my only question is , if my pressure washer don’t have a bypass , the fitting that screw into the unloader it’s just a fitting with a barb or is it a specific valve